Raglan sleeve: pattern and construction, as well as photos, how to knit with a knitting needles raglan
Raglan sleeve: pattern and knitting method
The wardrobe items with a model of the sleeves of raglan do not lose their relevance for many years. This model of the sleeve is cut out together with the shelf and the back of the product and wins the adjustment of the figure. All depends on the slope, with its help you can visually expand or narrow the shoulder line. The design and construction of a raglan sleeve will not take long for needlewomen if you understand the basic principles of work.
How to make a pattern of a raglan sleeve model
In order to properly make a pattern of the selected sleeve model, you will need a sheet of white paper, better dense, measuring 150 centimeters by 120 centimeters. On the sheet you need to draw two lines: a vertical line - the line of the middle of the back, a horizontal line - the neck line, these two elements must intersect at a right angle. The point of intersection of lines should be marked as point A, from this point it is necessary to postpone the length of the back according to specific measures in order to put the point B, which will designate the waist line. Then from point B, it is necessary to put up point B, the distance between these two points should be equal to the measure of the length of the side, ie, the length from the waist to the place where the sleeve should begin. Next, we must return to point A and from it put down the measure of the length of the product and designate this point with the letter D. In turn, from the point T, postpone the measurement of the hip line and put the letters E and D.
Next, the construction of the pattern of the model of the raglan sleeve should be continued as follows: frompoint A to the right, it is necessary to postpone one-sixth of the neck circumference and from this tag put three centimeters up and mark with the number 3, then connect this point and the point D, thereby denoting the connecting line of raglan. Next, using a rectangular triangle and a ruler, you construct a shoulder line and mark it with the point D, then connect the points D and D, draw a line through the point three, and mark the point K. From this point it is necessary to put the measure of the length of the sleeve to the right and denote by the point A and through this pointdraw a line parallel to points I and D. Then from point A downwards one should postpone the measurement of the line of the brush and designate the point with the letter M, then connect the points M and D.
What the pattern should look like is shown in the photo.
How to tie a model of a raglan sleeve with
knitting. The knitting of a raglan sleeve on the spokes has one feature, namely, that the bevels of the sleeves must coincide with the neckline. Therefore, in the process of knitting, it is necessary to reduce the number of loops so that at the time when the sleeve is tied to the neckline, all the hinges of the sleeve are closed.
How to knit a raglan sleeve with knitting needles is understandable, thanks to the scheme: in order to make the armhole line at the desired height, you first need to close the three loops, and then knit the next rows, reducing one eyelet on each side in each second row. To make the neckline look nice and not pull down, you can tie the back piece one centimeter more, but then you need to reduce the number of loops.
How to sew a sleeve of raglan needlewomen will help to understand the scheme: first you need to tie the first two or three loops of the row, then tie the loops with the slope to the left, then you need to do a reduction, for this, before the last two or three loops of the row, you need to tie two loops together with the front loops.
How to build and sew a model of the sleeves of raglan
In the selection of the video presented below, the needlewomen will share their experience on how to correctly calculate the number of loops and rows for building a model of a raglan sleeve according to the standards and how to properly stitch the sleeve into the product.
The wardrobe items that have a model of the sleeves of raglan do not lose their relevance for many years. This model of the sleeve is cut out together with the shelf and the back of the product and wins the adjustment of the figure. All depends on the slope, with its help you can visually expand or narrow the shoulder line. The design and construction of a raglan sleeve will not take long for needlewomen if you understand the basic principles of work.
How to make a pattern of a raglan sleeves model
In order to properly make a pattern of the selected sleeve model, you will need a sheet of white paper, better dense, measuring 150 centimeters by 120 centimeters. On the sheet you need to draw two lines: a vertical line - the line of the middle of the back, a horizontal line - the neck line, these two elements must intersect at a right angle. The point of intersection of lines should be marked as point A, from this point it is necessary to postpone the length of the back according to specific measures in order to put the point B, which will designate the waist line. Then from point B, it is necessary to put up point B, the distance between these two points should be equal to the measure of the length of the side, ie, the length from the waist to the place where the sleeve should begin. Next, we must return to point A and from it put down the measure of the length of the product and designate this point with the letter D. In turn, from the point T, postpone the measurement of the hip line and put the letters E and D.
Next, the construction of the pattern of the model of the raglan sleeve should be continued as follows: frompoint A to the right, it is necessary to postpone one-sixth of the neck circumference and from this tag put three centimeters up and mark with the number 3, then connect this point and the point D, thereby denoting the connecting line of raglan. Next, using a rectangular triangle and a ruler, you construct a shoulder line and mark it with the point D, then connect the points D and D, draw a line through the point three, and mark the point K. From this point it is necessary to put the measure of the length of the sleeve to the right and designate by the point A and through this pointdraw a line parallel to points I and D. Then from point A downwards one should postpone the measurement of the line of the brush and designate the point with the letter M, then connect the points M and D.
What the pattern should look like is shown in the photo.
How to tie a model of a raglan sleeve with
knitting. The knitting of a raglan sleeves on the spokes has one feature, namely, that the bevels of the sleeves must coincide with the neck of the neck. Therefore, in the process of knitting, it is necessary to reduce the number of loops so that at the time when the sleeve is tied to the neckline, all the hinges of the sleeve are closed.
How to knit a raglan sleeve with knitting needles is understandable, thanks to the scheme: in order to make the armhole line at the correct height, you first need to close the three loops, and then knit the next rows, reducing one eyelet on each side in each second row. To make the neckline look nice and not pull down, you can tie the back piece one centimeter more, but then you need to reduce the number of loops.
How to sew a sleeve of raglan needlewomen will help to understand the scheme: first you need to tie the first two or three loops of the row, then tie the loops with the slope to the left, then you need to make a decrease, for this, before the last two or three loops of the row, you need to tie two loops together with the front loops.
How to build and sew a model of the sleeves of raglan
In the selection of the video presented below, the needlewomen will share their experience on how to correctly calculate the number of loops and rows for building a model of a raglan sleeve according to the standards and how to properly insert the sleeve into the product.