Detailed instructions how to quickly fold a T-shirt with video and step-by-step photos

Gently folded things save space and keep order in the closet. For such purposes it is very important to learn how to quickly fold a T-shirt, and the video will help us in this.

Other videos on the same subject you will find at the end of the article.

It's quite a boring task to disassemble things after washing, but there is a way to speed it up. To do this, you need to remember some rules about how to fold things, in this case, T-shirts.

Instructions for folding T-shirts

1) Lay out the T-shirt on a flat surface: on a chair, sofa or on the floor. It is worth noting that the surface should not be covered with a cloth or a film, so that it is not accidentally captured with a T-shirt.

2) Put the thing sideways so that the right sleeve is at the bottom, the left one at the top, the neck on the left side.

3) Retreat approximately 5 cm up from the neck on the left shoulder seam. From this point, draw the line with the edge of the palm to the right, to the edge of the T-shirt, parallel to the side seams of the T-shirt.

4) Measure approximately 10 cm to the right along the side seam from the point of contact with the left sleeve. To draw from this point a line parallel to the bottom edge, which must intersect with the first. At the point of intersection, grab the tissue with your left hand.

5) With your right hand, grasp the T-shirt at the point located on the shoulder seam, from which the line was drawn. Without releasing the jersey, hold the right hand on the bottom edge of the T-shirt, to where the line ends. Thus, throw your right hand through your left hand, so that the left hand is under the cloth. Holding the right hand area on the shoulder, left to grab the bottom of the T-shirt at the level of the line.

6) The left hand, not letting go of the fabric, pull out from under the overstuffed top half of the jersey. Shake the tissue. The t-shirt will be folded in half, its lower part will be in front, and the upper part behind it.

7) Drop the thing on a horizontal surface, onto the sleeve that was not filled, put the entire T-shirt. Make sure that the edge of the sleeve reaches the side edge of the folded shirt.

8) The length and width of the folded thing depends on the size of the indentations on the side and shoulder seams. If you increase the spacing from the sleeve, the length of the T-shirt will increase in the folded form, with increasing indentation on the shoulder - the width will increase.

Ways of folding T-shirts

To keep the original look, you need to look after it. In this case it is very important to know how to fold a T-shirt so that they always look like new.

Collapse T-shirts so that they do not crumple and retain a great shape, not the first time. Skilfulness, sleight of hand and desire will help to achieve mastery in this business. Having mastered this technique, you can fold T-shirts in 2 seconds.

There are several ways to implement this task.

The first way

To properly fold the T-shirt, you need to exclude all its irregularities, creases, dents. Take in the palms of the right and left sleeves T-shirts and roll them inside. In doing so, observe the boundaries on the bend. The result is a rectangle. It can be folded several times if the T-shirt is large. For convenience and fast folding things fit a special board.

The second way

To save space in the closet or in a suitcase, another method will do. It consists in folding the sleeves inward and folding the resulting rectangle into the cylinder. If the T-shirt has a pattern, then it is enough to fold the sleeves inside, then fold the thing once, getting a square. At the same time, make sure that the pattern is not bent.

The third way( store)

Consider visually , how to fold a T-shirt beautifully, just as it is laid out in piles in stores.
This method requires:

• cardboard;
• ruler;
• scissors;
• pencil;
• adhesive.

The dimensions of the cardboard will depend on the size of the T-shirt. For example, to add children's clothes, the dimensions of the parts will be as follows:

- part A - 2 pieces, measuring 55 cm by 18 cm;
- part B - 1 piece, measuring 55 cm by 28 cm;
- part C - 1 piece, measuring 28 cm by 18 cm.

Detail With the middle of the B part, bend 2 cm from the A parts and glue it to the bent. After making the bend of the C part, it is also glued to the B piece. The device is ready.

We start to fold a T-shirt.

The ability to fold t-shirts is a very important skill, thanks to which the cabinet will always be in order, and things will get a well-groomed appearance.

Related videos of the article