Master class on shamball bracelet in the technique of double and triple weaving with step-by-step instructions and photos

Not so long ago, bracelets of shamballa became very popular among accessories, in particular, bracelets. Whether because of its unpredictable uniqueness, or because of the simplicity of creation, of course, if you fill your hand, this object has the best of all other types of accessories. And now many girls are wondering: how can you make shamballa yourself? In this article we will just answer this question. It's time to start our master class on weaving a shamballa bracelet.

It is known that three types of weaving are distinguished: classical, double and triple, but we will try to weave only the last two( on our vzlyad, they are the most interesting).

Classic bracelet:

Double:

Triple:

Shamrock double bracelet Shamballa

First, we will compile a list of the required materials:

1) Three pieces of cord. Waxed, synthetic, leather or usual woolen tangle, the main thing that you liked. The first two cords will be the main ones, therefore their length should be about 40 cm. Third, we will make nodules and wrap beads, its length is 1.5 m.

2) Thread and needle.

3) Beads 24 pieces and two more for fastening. Any color, size and shape, you can choose what you like best.

4) Scissors, adhesive tape, ruler.

5) Lighter( for moxibustion).Working surface.

Well, we have collected all the necessary items, now you can start, but before that you should definitely know what the weaving of locks.

In the picture, the left bar indicates the weave of the first lock, the second one of the second lock. The lock is created by braiding the main cord( 40 cm) with an additional cord( 1.5 m).

How to weave the lock

1. Fix the smaller cord on the work surface( tie to anything or press down the free end)

2. Tie a larger string to a smaller normal knot. This will fix the long cord.

3. Link the first node according to the scheme. The left end of the long lace is directed to the right, under the right end. Then pass through the formed loop and tighten. The first bundle is ready.

4. The second do exactly as the first.

5. Secure the nodules to the place where you are going to put the bead.

Now you can start to weave a bracelet.

We fix the two main cords on the working surface and tie them in addition, we make 3-4 locks. String on each of the main for 12 beads.

P. S. so that the cord passes more easily through the beads, set its end or glue it with glue. For convenience, after stringing all 24x beads, tie together the remaining two ends and press them with something heavy. Push the beads to the locks.

Take the left end of the long cord and wrap the first bead around it in a spiral.

Thus, we wind all the beads, gently pushing them up to denser sat.

The remaining right end of the long lace is fixed on the table with tape so that it does not interfere.

Then take the left end of the cord and do the same operation as with the right one. We go down, entangling the beads in a spiral. Do not forget to tighten the lace tightly.

We tie three or four locks( as in the beginning).

Next, take the workpiece and fix( you can use the clamp) the main laces in parallel to each other.

We begin to weave the locks around the fixed laces. Scourge as much as you need, counting on your wrist.

After the end of the previous step, tie a knot on the inner side of the shamballa( long lace).It is desirable to fix the nodule with glue, but carefully.

Pull for one pair of two ends of the main cord, checking the integrity of the bracelet. Laces should be tightened without hindrance.

We tie a knot from the main threads at a distance of about 5-7 cm and string each one more beads.

Then, tie knots, fixing additional beads, and cut off excess ends.

Wear it with pleasure!

Video:

We knit a triple Shambala

In addition to a simple double bracelet, there is a way and more difficult. The set of materials will change slightly, but instead of two 40 cm shoelaces, three and two 1.8 m are needed. And beads - 35. Let's begin.

We string beads on the fixed main shoelaces.12 on side laces and 11 on the middle.

We take two additional cables and tie them in a small knot at the tip( so it will be more convenient to work).

We twist the three nodules first, grabbing all three main cords with extra ones. Make sure that the main cords are not messed up!

Pull up one bead from the extreme main laces.

Take the left extension cords and tie the left bead around them. We tie a knot.

Same and on the right side, but use the right extra lanyard.

We push up the middle bead and we braid it with the middle tips of the extra cords.

We repeat these actions to the end.

At the end we tie three nodules with extra laces( as in the beginning).

http: // www.trozo.en / wp-content /uploads/2014/03/ 16. jpg

We take the workpiece and, fixing the main cords with a clamp parallel to each other, we fasten them with additional locks. Do as much as you like.

Make a knot on the inner side of the shamballa and fix it with glue.

We make a knot on one of the main beads( at a distance of 5-7 cm) and string a bead, then fix it with a knot from above.

Do the same with the other ends of the main cord.

Cut off the extra.

Also you can help and video on the same subject:

Conclusion:

Now you can accurately surprise your family, friends and family with a brand new self-made accessory.