Thread neckline: master class, diagrams and video
Knitting the necks: kettledovka, roll and double bake
The last step in knitting an item is the processing of its neck. This stage of creating things is very important. Since it can give an untidy and incomplete look to the product, or vice versa ─ a well-chosen way of tying the neckline will give things an elegant look and decorate it. In this article, the tying of the neck with the spokes of the master class is described in detail about the process of work.
Attention to the training video lesson:
Kind of neck determines the choice of the method of tying
Depending on what type of neck is selected, the type of its binding is determined. There are such types of necks:
- Round;
- Square;
- V-shaped.
Below are considered the existing options for tying each type of neck. To begin with, it should be noted that the neck should be tied with spokes for a size smaller than the spokes that the product was associated with.
So, the round neck can be processed in several ways:
The method of kettledovki
This method of processing the neck is the most difficult and for better understanding it is recommended to watch the video. Using this method, the edge of the neck appears to be between the two knitting patterns. There are two methods kettledki - false and ordinary. For false kettledovki it is necessary to make a stitching seam along the edge of the seam or with the help of a hook or with a needle. The tambour seam is made in such a way that the braids of the seam are on the front side. Now, on the wrong side, loops are made on circular knitting needles, and knits 3-4 rows of the front face in a circle. Further, from the upper loop of the tambour seam, loops are taken to the second pair of circular spokes, and also knits 3-4 rows of facial smoothness. In this case, the lower loop of the tambour stitch serves as an imitation of the seam. Now two pairs of spokes are connected in one. At the same time if the knitting is not planned to continue, it is done with the help of a hook, collecting one loop from one pair of spokes and the second with the second knitting them together. Then the loop closes. If the knitting is planned to continue, then on the third pair of spokes two loops are tied together: one loop from one spoke and the second loop from the second. At usual kettledki the bake is knitted separately, finishing double knitting. In this case, a split edge is obtained. One side of the edge is closed, and the other is left with open loops. Further, these loops are sewn to the front of the article with a seam. On the wrong side, the closed edge is sewn with a suture seam.
Rulik
A rather simple way is to tie the product with spokes "rulikom".To begin with, using a hook without a handle, loop along the edge of the neck to the circular knitting needles. Next, the front surface smooths. Several rows are fused, on average 5-6, and then the loops are closed. The neck, which is connected in this way, will wrap itself in the cudgel itself. You can make a double roll, tying the same from the loops recruited from the set row of the first roll.
Double Bake
This method binds the necks of the neck as follows. First, you need to loop along the edge of the neck to the circular knitting needles. Knit in a circle rubber band. The length of the bonded rubber should be twice as wide as the desired length of the neck. Now the hinges are closed, and the free edge of the elastic is sewn neatly to the inside of the neck.
The square neck is tied in this way. Loops are typed on the circular spokes along the edge of the neck. Then it is necessary to mark the loops per angle. Next, we knit in a circle with an elastic band, with the angular loops knitting like this: the corner loop and the previous one are removed as facial loops, the next loop knits in front and stretches through the two loops removed. Thus, the corners of the rectangular mouth turn out to be neat and keep the shape well. The tie-in of the angle of the V-neck is similar to the corners at the square neck.
Processing of such a neck has a variety of options binding the edge of the spokes circuits which can be found on the Internet in detail.
The last step in knitting an item is the processing of its neck. This stage of creating things is very important. Since it can give an untidy and incomplete look to the product, or vice versa ─ a well-chosen way of tying the neckline will give things an elegant look and decorate it. In this article, the tying of the neck with the spokes of the master class is described in detail about the process of work.
Attention to the training video lesson:
Kind of neck determines the choice of the method of tying
Depending on what type of throat is selected, the type of its binding is determined. There are such types of necks:
- Round;
- Square;
- V-shaped.
Below are the existing options for tying each type of neckline. To begin with, it should be noted that the neck should be tied with spokes for a size smaller than the spokes that the product was associated with.
So, the round neck can be processed in several ways:
The method of kettledovki
This method of processing the neck is the most difficult and for better understanding it is recommended to watch the video. Using this method, the edge of the neck appears to be between the two knitting patterns. There are two methods kettledki - false and ordinary. For false kettledovki it is necessary to make a stitching seam along the edge of the seam or with the help of a hook or with a needle. The tambour seam is made in such a way that the braids of the seam are on the front side. Now, on the wrong side, loops are made on circular knitting needles, and knits 3-4 rows of the front face in a circle. Further, from the upper loop of the tambour seam, loops are taken to the second pair of circular spokes, and also knits 3-4 rows of facial smoothness. In this case, the lower loop of the tambour stitch serves as an imitation of the seam. Now two pairs of spokes are connected in one. At the same time if the knitting is not planned to continue, it is done with the help of a hook, collecting one loop from one pair of spokes and the second with the second knitting them together. Then the loop closes. If the knitting is planned to continue, then on the third pair of spokes two loops are tied together: one loop from one spoke and the second loop from the second. At usual kettledki the bake is knitted separately, finishing double knitting. In this case, a split edge is obtained. One side of the edge is closed, and the other is left with open loops. Further, these loops are sewn to the front of the article with a seam. On the wrong side, the closed edge is sewn with a suture seam.
Rulik
A simple way is to tie the product with knitting needles. To begin with, using a hook without a handle, loop along the edge of the neck to the circular knitting needles. Next, the front surface smooths. Several rows are fused, on average 5-6, and then the loops are closed. The neck, which is connected in this way, will wrap itself in the cudgel itself. You can make a double roll, tying the same from the loops recruited from the set row of the first roll.
Double Bake
This method binds the necks of the neck as follows. First, you need to loop along the edge of the neck to the circular knitting needles. Knit in a circle rubber band. The length of the bonded rubber should be twice as wide as the desired length of the neck. Now the hinges are closed, and the free edge of the elastic is sewn neatly to the inside of the neck.
The square neck is tied in this way. Loops are typed on the circular spokes along the edge of the neck. Then it is necessary to mark the loops per angle. Next, we knit in a circle with an elastic band, with the angular loops knitting like this: the corner loop and the previous one are removed as facial loops, the next loop knits in front and stretches through the two loops removed. Thus, the corners of the rectangular mouth turn out to be neat and keep the shape well. The tie-in of the angle of the V-neck is similar to the corners at the square neck.
Processing of such a neck has a variety of options binding the edge of the spokes circuits which can be found on the Internet in detail.