Pattern of a dress with an overstated waist, with a smell, for full, for pregnant women and for girls

Dress with an overstated waist is for every woman of fashion, but not everyone knows that it is not difficult to sew it.

Below is a pattern of a dress with an overstated waist, which you can easily sew yourself.

Shroud

From the waist the length of this dress is 50 cm.

Materials required

• Baptist, with a width of 1.4 m - 3.15 m;
• Satin for lining, with a width of 1.4 m - 0.5 m( if the main fabric does not shine, you can do without lining);
• Secret zipper - 0,4 m.

Pattern

Such a thing is good because it sits perfectly like a woman who has 44 sizes of clothes, and on the one with 50 sizes.

Number of parts and description of the pattern

1- in front of the fold, quantity - 2 pcs.;

2 - backrest, quantity - 4 pcs.;

3 - belt with fold, quantity - 1 piece;

4 - front panel with fold, quantity - 1 piece;

4 - rear panel, the number - 2 pcs.;

5 - collar, quantity - 1 piece.

How to sew

Stitch the wrinkles and perform the shoulder seams on the gear parts. Stitch the backrest armholes. Cut the neck of the neck. Sew a collar - a scarf. Sew on the lateral seams. Stitching belt and dress top. From the main fabric and lining to sew a skirt, then pritach them to the belt. Pritachnoe secret zipper. Separately, make back seams on the lining and skirt - from the bottom to the zipper. Bend the lower edges and stitch it.

With the smell of

Here is a charming dress with a smell and with an overstated waist can be sewn by yourself.

Patterns

Step-by-step construction of the pattern

Before, sleeve and back:

Skirt:

Detailed description of work

Cut out 2 pieces of knit fabric, 1 backrest detail with fold, 2 skirt details, 2 sleeve parts. Perforation of the neck is 3 cm wide. Seam allowances are 1 cm, and on the bottom of the sleeves and hem is 3 cm. If you did not choose an elastic fabric, then sew a zipper along the back.

Run assembly on the bottom on the shelf parts. Stitch over shoulder and side seams. Edit allowances. Treat the neck and neck with a whiskey.

Put the right half on the left, perform the smell.

It is worth noting that this dress is suitable for both thin and fat women.

Stitch the details of the skirt. Lay the folds, tuck the bottom of the skirt. On the waist line, sweep the skirt and top of the dress, stitch. Edit allowances.

Stitching at the seams of the sleeves. Stitch them in the armholes. Fit the allowances along the seam and stitch. Congratulations, you're done!

A long dress

The next dress pattern with an overstated waist in the floor will appeal to absolutely everyone, as the dress sewn on it is very gentle and feminine.

The figure shows the approximate location of the folds on the back and front, so they need to be modeled on the dummy.

Sleeves require mandatory heat treatment. For this, it is necessary to pull them along the front section - iron out the elbow section, pull it down - iron it in the wrist.

The style of this long dress is made in a historical style.

For pregnant women

Patterns of dresses for pregnant women have differences from the usual.

Description of creating a pattern

1. Draw a backrest with a fold in the middle. The front part, along the line of the abdomen, needs to be increased in the middle.
2. Raise the waist line so that it is above the tummy.
3. Cut the front piece along the lines of the recesses: from the center of the chest to the thighs, along the thigh line, from the center of the chest to the intersection of the armhole and side cut lines and from the center of the chest, at an angle of 90 degrees, to the midline line.
4. After the cut, you need to increase the volume.
5. To increase the waist circumference, it is necessary to move the pattern part from the center of the chest to the midline line of the line through the 1.5 cm cut line.
6. Move the top front piece to the right by 0.5 cm. Draw new darts.
7. To increase the line of the tummy, you need to spread the pattern details by 3-4 cm along the waist line.
8. Step 7 cm down from the center of the chest and draw a new waist line.
9. Then transfer the new overstretched waist to the backrest pattern.
10. Build on the back of the tuck.

For children

To sew a dress with an overstated waist for a girl, you must first build a pattern on the cardboard.

First we draw 1 backrest part, then the front half. It should be noted that before consists of 6 parts: 3 external and 3 internal. A thin line of transmission is drawn on the photo.

Now you need to complete 3 parts of the transfer. Fold the fabric in half and cut 2 parts - outer and inner.

The last pattern on this photo is half the sleeve. Such make 2 pieces.

Now you need to transfer the patterns to the fabric.

Smooth the allowances.

Now you need to sew the paired parts from the inside.

Screw on the front. It turned out 2 front parts.

Stretch part of the back.

Produced a blank that looks like a waistcoat.

In the same way, it is necessary to attach the middle 2 parts of the transmission from the inside.

Make on the details the transfer marks where there will be buttons.

Make 6 loops.

Attach the pins to the waistcoat with the middle part.

Roll edges at the sleeves and iron.

Gather a little in the folds and stitch at the top of the dress.

Process on the inside of the edge.

Sew the sleeve under the arm.

Bend the edge and secure with pins. Sew the edge of the sleeve.

Now you need to measure the length of the dress. The best option is the length to the knees.

Attach to the side seam and process. Make the assembly on top and process it.

Turn and hem the hem. Sew the buttons and the lower part of the dress to the top.

Here is a charming, individual, and most importantly, a free sewed item of clothing we have turned out.

Video tutorials