Frivolite schemes for beginners: ankars, collars, napkins, earrings
Frivolite: the diagrams of the main knots made by shuttle technics and the master class on making earrings
Before we start creating the first products, we need to learn the basic elements of frivolity, we will not discuss schemes for beginners with a needle, focusing on the more popular technique - shuttle.
Node
The node is the most basic element of frivolity. With his help, a ring and an arc are woven. The knot is braided as follows:
- The thread is fixed between the thumb and forefinger and wraps it all remaining, keeping them slightly apart. Again, fix the thread with the same fingers - get a ring. We take the shuttle with the right hand, holding so that the thread is at the ring finger or little finger, which will control the tension.
- We carry the shuttle in a ring from below upwards between the index and middle fingers.
- The received first half-node is firmly held by the big and index, the tightening thread should fit snugly against them.
- The second half of the node will be mirrored, the shuttle will already lead from top to bottom.
- The thread is weakened so that the half-node is close to the previous one.
- Once the required number of nodes has been done, pull the thread from the shuttle to close the ring.
Pico
Loosen part of the thread before tightening the second half of the knot. Then we make the second half of the knot and form a small loop.
Ring
The ring is the main element of frivolite, it consists of absolutely all products: both napkins, and pendants, and hats, etc. A ring consists of a certain number of knots and a pico. It is done by tightening the thread of the shuttle in the right hand: the thread will be tightened, and the nodules come together, thereby closing the ring.
If you continue to work, the ring will gradually contract a little. If all nodes are made correctly, then the shuttle will freely pass into a circle inside which you can continue to work.
Arc
It will already need to use 2 threads: one leading, and the second one free. It can be on the second shuttle or wound on a ball. We hold the second thread between the index finger and the thumb of the left hand, hold it over the other fingers and wrap it around the little finger several times. This we will fix it to keep it taut. This element is also widely used in the weave. For example, such collars are not without it:
Connecting arches and rings
If you need to connect the details of the weave, you will need a crochet hook( of course, if it is not part of the design of the shuttle).Hooked into the pico, grabbing the crochet and lifting the thread that forms the ring. Shuttle the leading thread in the loop from the bottom up. With your right hand, tighten the knot and continue to work.
Other elements: decoration with beads and beads
Knitted lace can be decorated with various beads, beads, glass beads. In this case the lace bears the name ankars. The frivolite schemes in the weave can be different, but the main 2: this is either threading the beads on the thread in advance, before the working thread and the shuttle are merged. Or you can make a bead a decorative element of the pico type. To do this, you need to string the bead on the smallest hook, grab the pico and move the bead onto it. Now we are dragging the thread of the bead that looks out of the bead of the bead, and we hold the shuttle from the working thread and tighten it.
Earrings: master-class with step-by-step photos
Use the knowledge gained to weave your first product. It will be very elegant earrings, which can become a wonderful gift for yourself and your loved one.
Materials:
- filaments: lurex and lavsan;
- empty coil;
- hook 0.6 mm;
- shuttle;
- scissors;
- needle;
- square beads 6 mm;
- beads № 6, 11, 15;
- round pliers;
- fittings in the form of carnations.
1. The lavsan is wound on an empty reel.
2. Thread the coils from three coils to the shuttle.
3. Plait the base of the frivolite, the earring patterns are as follows:
4. At the beginning of the work, leave the tails at least 15 cm.
5. The plait 4 rings of the earring. The base is ready.
6. The basis is expanded according to this scheme:
7. We fill the thread in the needle, attach it from the inside with small stitches. The remaining ends are also sewn from the inside of the fourth ring, wrapping the 3 tails.
8. The blue bar denotes the fixed ends of the strands. Gently cut off the excess.
9. The needle is shown on the face of the product.
10. Type 1 large bead, then bead, then 1 bead again. Stitching between points. We return to the base of the ring.
11. We sew on the wrong side and take the needle from the side to the face.
12. Bead 6 sewn between the blue dots. We bring the needle to the face in the hole between the beads and the lace.
13. Recruit the 3 smallest beads and make a loop, returning to the starting point. The needle is again shown on the face.
14. We collect 4 more beads and sew here:
15. Again the needle should be on the front side. We collect the seed beads № 11, sewed:
16. Thread the threads, sewing around 1 ring. Cut off the tails.
17. Sew crosses between 1 and 4 rings.
18. The second earring is made in a mirror image.
19. Earrings are ready.
Video tutorials for beginners
So, the time for our video-selection.
Before we start creating the first products, we need to learn the basic elements of frivolity, we will not touch upon the schemes for beginners with a needle, placing emphasis on the more popular shuttle technique.
Node
Node is the most basic element of frivolity. With his help, a ring and an arc are woven. The knot is knotted like this:
- We fix the thread between the thumb and forefinger and wrap it with all the remaining ones, keeping them slightly apart. Again, fix the thread with the same fingers - get a ring. We take the shuttle with the right hand, holding so that the thread is at the ring finger or little finger, which will control the tension.
- The shuttle is held in a ring from below upwards between the index and middle fingers.
- The received first half-node is firmly held by the large and index, the tightening thread must fit snugly against them.
- The second half of the node will be mirrored, the shuttle will already lead from top to bottom.
- The thread is weakened so that the half-node is close to the previous one.
- As soon as the required number of nodes is done, pull the thread from the shuttle to close the ring.
Pico
Loosen part of the thread before tightening the second half of the knot. Then we make the second half of the knot and form a small loop.
Ring
The ring is the main element of frivolite, it consists of absolutely all products: both napkins, and pendants, and hats, etc. A ring consists of a certain number of knots and a pico. It is done by tightening the thread of the shuttle in the right hand: the thread will be tightened, and the nodules come together, thereby closing the ring.
If you continue to work, the ring will gradually contract slightly. If all nodes are made correctly, then the shuttle will freely pass into a circle inside which you can continue to work.
Arc
You will already need to use 2 threads: one leading, and the second one free. It can be on the second shuttle or wound on a ball. We hold the second thread between the index finger and the thumb of the left hand, hold it over the other fingers and wrap it around the little finger several times. This we will fix it to keep it taut. This element is also widely used in the weave. For example, such collars are not without it:
Connecting arches and rings
If you need to connect the details of the weave, you will need a crochet hook( of course, if it is not part of the design of the shuttle).Hooked into the pico, grabbing the crochet and lifting the thread that forms the ring. Shuttle the leading thread in the loop from the bottom up. With your right hand, tighten the knot and continue to work.
Other elements: decoration with beads and beads
Knitted lace can be decorated with various beads, beads, glass beads. In this case the lace bears the name ankars. The frivolite schemes in the weave can be different, but the main 2: this is either threading the beads on the thread in advance, before the working thread and the shuttle are merged. Or you can make a bead a decorative element of the pico type. To do this, you need to string the bead on the smallest hook, grab the pico and move the bead onto it. Now we are dragging the thread of the bead that looks out of the bead, and we hold the shuttle from the working thread, and tighten it.
Earrings: master-class with step-by-step photos
Use the knowledge gained to weave your first product. It will be very elegant earrings, which can become a wonderful gift for yourself and your loved one.
Materials:
- filaments: lurex and lavsan;
- empty coil;
- hook 0.6 mm;
- shuttle;
- scissors;
- needle;
- square beads 6 mm;
- beads number 6, 11, 15;
- round pliers;
- fittings in the form of carnations.
1. The lavsan is wound on an empty reel.
2. Thread the coils from three coils to the shuttle.
3. Plait the base of the frivolite, the earring patterns are as follows:
4. At the beginning of work, leave the tails at least 15 cm.
5. Plait 4 ring earrings. The base is ready.
6. The basis is expanded according to this scheme:
7. We fill the thread in the needle, attach it from the inside with small stitches. The remaining ends are also sewn from the inside of the fourth ring, wrapping the 3 tails.
8. The blue bar indicates the fixed ends of the strands. Gently cut off the excess.
9. The needle is shown on the face of the product.
10. Type 1 large bead, then bead, then 1 bead again. Stitching between points. We return to the base of the ring.
11. We sew on the wrong side and take the needle from the side to the face.
12. Bead 6 sewn between the blue dots. We bring the needle to the face in the hole between the beads and the lace.
13. Recruit the 3 smallest beads and make a loop, returning to the starting point. The needle is again shown on the face.
14. We collect 4 more beads and sew here:
15. Again the needle should be on the front side. We collect the seed beads № 11, sewing:
16. Thread the threads, sewing around 1 ring. Cut off the tails.
17. Sew crosses between 1 and 4 rings.
18. The second earring is made in a mirror image.
19. Earrings are ready.
Video tutorials for beginners
So, the time for our video-selection.