Macrame bracelets for beginners: weaving patterns are simple and with beads
Macrame bracelets for beginners: amulet and simple bracelet from cord
Probably the most popular product that almost all beginners try to weave in this technique are macrame bracelets-for beginning masters this is really a possibility quite quickly( depending on the model, of course),see the first results of mastering a new kind of needlework. And bracelets on some schemes will not be difficult to carry out even for people completely unfamiliar with this technique.
Shamballa bracelet
Shamballa bracelets-amber now very popular. What is Shamballa and why we weave it, find out from the video.
However, not everyone knows that making such a decoration is easy enough, especially if there is a detailed master class with step-by-step photos. With his help, you can also weave other macrame bracelets with beads: the patterns are quite similar. Experiment with materials, fittings and knots to get your own unique amulet.
Materials:
- 3.5 m of any cord. The only thing you should not use is a fleecy thread - they can slightly smear the impression of a beautiful weaving;
- beads with large holes: through the hole we pass two laces;
- paper clip or pin and soft work surface;
- scissors;
- pliers.
Step-by-step MK with photos
1. We take two pieces of a cord of 60 cm and one of 1.8 m. Leaving an allowance of about 20 cm, attach two threads on the working surface with a clamp or pins. The long segment will be the working thread( in the photo black), we place it under the warp threads( we have them blue).You can start the weaving from any side. For an example, let's start from the right.
2. Well tighten the cords, and get the first half of the square node. In order to do the second half, we repeat the actions, but on the other hand.
3. Tightly tighten the finished square knot.
4. The number of such nodes between the beads determine independently to your taste, however, the odd number looks nicer.
5. Remain the remaining tails of the laces by using a needle: just drag it inside the last square knot. This may require pliers.
6. We cut off excess pieces of threads with scissors.
7. Bracelets with their own hands in the technique of macrame can be completed with a sliding clasp in the same technique. In this case, you do not even need additional hardware, with the attachment of which is not always easy to understand.
8. We close our bracelet in a circle, fix it with small pieces of thread.
9. Cut off the skein of a piece of cord about 30 cm long, put it under the bracelet threads( they should be 4).We knit the square knots, until we get a lock about 1.5 cm. We hide the ends of the thread inside the nodules. We divide the "tails" in pairs, we tie knots on each pair. You can also decorate them with beads, which will prevent the slipping of the tips from the knot.
Bracelet from cord
A stylish bracelet can be made from a regular nylon cord, even without decorating it with different beads.
For such a bracelet you will need:
- 3 m nylon cord with a diameter of 0.3 cm;
- ruler or centimeter;
- scissors;
- clasp;
- lighter.
Detailed instructions with photos step by step
1. First of all we measure the wrist.
2. Fold the cord in half, pass it through the buckle, tighten it.
3. Through the second part of the buckle we draw the ends of the cord. The distance between its two parts should be equal to the length of the circumference of the wrist +2.5 cm.
4. We begin knitting knots. We pass the cord to the left and move it along the buckle through the left side of the loop. Tighten the cord so that the center is opposite the buckle. Now under this center we hold the right part of the lace. Under the right part we pass the left cord, we lead through the knot under the buckle and through the right side of the loop. We tighten it.
5. In this way, we fill all the space between the buckle parts with the knots. They should be the same size.
6. Excess cord cut off close to the node and cauterized by fire. We hide the ends under the last pair of knots.
If everything is done correctly, the bracelet will look like a photo.
It will not be superfluous for those who started to learn the weaving of macrame bracelet schemes, presented in the video lessons below.
Probably the most popular product that almost all beginners try to weave in this technique are macrame bracelets-for beginning masters this really is a possibility quite quickly( depending on the model, of course), to see the first results of mastering a new kind of needlework. And bracelets on some schemes will not be difficult to carry out even for people completely unfamiliar with this technique.
Shamballa bracelet
Shamballa bracelets-amber now very popular. What is Shamballa and why we weave it, find out from the video.
However, not everyone knows that making such a decoration is easy enough, especially if there is a detailed master class with step-by-step photos. With his help, you can also weave other macrame bracelets with beads: the patterns are quite similar. Experiment with materials, fittings and knots to get your own unique amulet.
Materials:
- 3.5 m of any cord. The only thing you should not use is a fleecy thread - they can slightly smear the impression of a beautiful weaving;
- beads with large holes: through the hole we pass two laces;
- paper clip or pin and soft work surface;
- scissors;
- pliers.
Step-by-step MK with photos of
1. We take two pieces of a cord of 60 cm and one of 1.8 m. Leaving about 20 cm on the allowance, we attach two threads on the working surface with a clamp or pins. The long segment will be the working thread( in the photo black), we place it under the warp threads( we have them blue).You can start the weaving from any side. For an example, let's start from the right.
2. Well tighten the cords, and get the first half of the square node. In order to do the second half, we repeat the actions, but on the other hand.
3. Tightly tighten the finished square knot.
4. The number of such nodes between the beads determine independently to your taste, however, the odd number looks nicer.
5. The remaining tails of the laces are removed with a needle: just drag it inside the last square knot. This may require pliers.
6. We cut off excess pieces of threads with scissors.
7. Bracelets with their own hands in the technique of macrame can be completed with a sliding clasp in the same technique. In this case, you do not even need additional hardware, with the attachment of which is not always easy to understand.
8. Close our bracelet in a circle, fix it with small pieces of thread.
9. Cut off the skein of a piece of cord about 30 cm long, put it under the bracelet threads( they should be 4).We knit the square knots, until we get a lock about 1.5 cm. We hide the ends of the thread inside the nodules. We divide the "tails" in pairs, we tie knots on each pair. You can also decorate them with beads, which will prevent the slipping of the tips from the knot.
Bracelet from cord
A stylish bracelet can be made from an ordinary nylon cord, even without decorating it with different beads.
For such a bracelet you will need:
- 3 m nylon cord with a diameter of 0.3 cm;
- ruler or centimeter;
- scissors;
- clasp;
- lighter.
Detailed instruction with photos step by step
1. First of all we measure the wrist.
2. Fold the cord in half, pass it through the buckle, tighten it.
3. We pass the ends of the cord through the second part of the buckle. The distance between its two parts should be equal to the length of the circumference of the wrist +2.5 cm.
4. We begin knitting knots. We pass the cord to the left and move it along the buckle through the left side of the loop. Tighten the cord so that the center is opposite the buckle. Now under this center we hold the right part of the lace. Under the right part we pass the left cord, we lead through the knot under the buckle and through the right side of the loop. We tighten it.
5. In this way, fill all the space between the buckle pieces with the knots. They should be the same size.
6. Excess cord cut off close to the node and cauterized by fire. We hide the ends under the last pair of knots.
If everything is done correctly, the bracelet will look like a photo.
It will not be superfluous for those who started to learn the weaving of macrame bracelet schemes, presented in the video lessons below.