KANZASHI: Dahlia and roses dahlia for beginners and professionals

This article will tell you how quickly and easily you can learn one of the most magical techniques. Today we will hold the MK "Kanzashi for professionals and beginners".

Dahlias

You will need:

1. satin ribbon( width 2.5 cm);
2. tape( width 1 cm);
3. scissors;Lighter or candle;
4. tweezers.

Cut a ribbon 6 cm long and scorch it.

Then take one piece, turn the wrong side to yourself and bend the edge to the middle.

Now do the same with the second angle.

Now once again corners the corners in the middle.

Cut the extra.

And scorch the edges.

Two types of petals are needed for dahlia. Now we will make the second petal. We do the first four steps as in the previous one. I'll get this.

Now fold the corners to the middle, cut off excess and scorch.

The petal should be flat. Here's to compare.

Make 50 petals flat and 10 petals narrow. Now make a base on which to glue the petals. The diameter should be 5 centimeters.

Pour flat petals layer by layer.

When you have glued the four layers, we begin to make the middle. Cut 15 centimeters from a 1 centimeter wide tape.

Make cuts with scissors and a candle. Heat the scissors and follow the tape.

Fold the tape in half and tighten.

Now cover the first circle with flat petals.

And now we need narrow petals. Cover them with a second circle.

Then lubricate the middle and glue it to the main flower. But to make the flower look natural, you need to work a little more. Turn the flower over and place the remaining petals on the base.

One row will be enough to make the flower come to life.

If you get the petals the first time, you can not go to the Kanzashi Starter. After all, creating such a miracle is not so difficult.

Rosa

Roses are such florets that fit under any outfit. Consider a small rose which you can decorate your favorite tie or jacket.

To create a rose you need:

1. satin ribbon( width 5 cm);
2. lighter;
3. scissors;
4. pencil;
5. ruler;
6. adhesive.

To begin with, you need to cut the tape into squares of 5 centimeters. Immediately scorch the edges of

Such cubes should be 16 pieces.

Fold the square diagonally. You should have a triangle.

Wrap the corners inwards.

Cut a bit of the bottom part.

Straddle the edges. It should look like this.

Make all the other boxes the same.

Spread glue on the back of the petal.

Take the middle.

Now glue this petal with other blanks.

So we got our little rose.

If you want even more different ways of needlework in this style, then video MK Kanzashi will show a wide variety in the manufacture of various flowers.