womensecr.com

Dress-transformer: a pattern and a master-class on sewing this style

  • Dress-transformer: a pattern and a master-class on sewing this style

    click fraud protection

    This outfit looks very impressive and interesting, because the options for its drapery are huge. Learn how to sew a dress-transformer, a pattern which is shown below, will help the master class.

    What is needed

    A good stretch knitting fabric is about 5 m.

    Detailed description of work

    To start sewing your own dress-transformer, first you need to measure the waist and divide this value by 4.

    Make a pattern of the bottom of the dress. To do this, measure the length on the paper - the length of the skirt, then draw a line of the same length at an angle of 90 gr. The value that was obtained above means the length of the semicircular segment that will connect the 2 lines at the top. The photo is more understandable.

    Cut the fragment. It is 1/4 of the skirt.

    Fold the fabric in 4 layers, apply a pattern.

    Cut a skirt for an "infiniti" dress, as they are called.

    Next, you need to measure the width of the straps. You need about 20 cm, but you need to look at the straps of what width are more suitable for you. Their length also depends on your desire, but the longer they are, the more different draperies will be.

    instagram viewer

    Apply the details of the straps to each other overlapping.

    Pin details to the skirt, as in the photo.

    Now you need a belt, the length of which is equal to the waist's volume or, if the fabric stretches, a little less. Put it on the skirt, as in the photo.

    Sew and look what happened.

    So our outfit is ready, it remains only to show imagination and make a lot of options for drapery.

    Below are the photos that show that the dress transformer is perfect for full ladies.

    Emami

    Now at the height of the popularity of the dress-transformer emami( emami) and this is not surprising, because it is transformed into a very unusual and interesting dresses. Just look at these photos below!

    Consider the description of his sewing by himself.

    What is needed

    Double-sided elastic jersey with a width of 1.5 m. Calculate the length below.

    Job Description

    Measure the chest girth, measurement A. It determines the length of the belt. It is better to measure a fabric folded in half, so that later the dress does not fall down and does not squeeze the chest.

    Determine the height of the belt. It should be taken into account that in some transformations it is folded several times, so it should be wide enough, about 15 cm. This is a measurement of B.

    Measure from the bottom of the belt to the knee and from the knee to the collarbone. The length can be reduced or enlarged. For this, measure above or below the knee and from this point to the clavicles. This is a measurement of B.

    Measure the distance from the bottom of the belt to the ankles and from the ankles to the waist. Merchand B should be less than this distance.

    Let's count. For sewing, you need a cloth with a width of 1.5 m and length = B + 2 * B + A / 2 + allowances.

    Cutting

    All seams should be over-rolled and very elastic.

    Straps:

    Cut off the sides of fabric 2 strips 3 cm wide. Sew them together to get 1 long strip, about 3 m. Minimize in width, stitch and unscrew.

    Belt:

    Cut a piece of 2 * B by width and length A + allowances. Collapse in half in width, overturn and stitch in the ring.

    Main part:

    After cutting all the parts, there was a rectangle of 142 cm. *( B + A / 2).

    Fold it in half lengthwise. Make an incision length of A / 2 along the fold. Make at the end of the cut a small teardrop-shaped incision, in order for the belt to stitch and over-fold without creases.

    Overcut the section from the side of the cut along the short side. This is the back of the dress.

    Remains an opening under the lining of the belt along the fold of the canvas with a length of A / 2.Stitch in the opening of the belt and overthrow. Overlap along the edge, but do not sew long sides of the canvas.

    Make last, after the last fitting, the kuliska in the untouched side of the canvas. Find the right length of the dress and cut off all that is superfluous.

    The bow must be made slightly wider than the string. If the strings are 1.5 cm, then the kuliska should be 2.5 cm.

    Sew the ties to the kuliska - and the emas are ready.

    Below is a video that shows the options for transforming this outfit. A video compilation for the article