womensecr.com

Gaiters with knitting needles for girls, for women with step-by-step description

  • Gaiters with knitting needles for girls, for women with step-by-step description

    click fraud protection

    Leggings with knitting needles: description of several ways of knitting with photos

    Leggings are a favorite detail of many ladies' wardrobe. They can be purchased at the store, or you can link them yourself. For this, the master class "gaiters with knitting needles" with the schemes that will help in the work is given below.

    The easiest way

    What is needed

    • Yarn 350 g;
    • Spokes 3,5 mm.

    The length of the product is approximately 62 cm.

    The density should be 30 p.and 22 pts are equal to a square of 10 × 10 cm.

    Below is a detailed description of how to bind gaiters with spokes.

    Description

    You need to knit from the top to the bottom of the gaiter in a circle.

    For this you need to dial 140 pcs and knit about 15 cm according to the scheme M1.

    Wrong place:

    Item:

    Remove before work on extra.knitting needle 2 pt., knit 2 next l.etc., then 2 liters.with add.knitting needles.

    Continue knitting like this:

    Knit the first 8 st under the scheme, the rest of the loops knit with garter stitching, knitting at the same time.2 p. In each pigtail( except those that are in the middle from the back side).The hinges should be 114.

    instagram viewer

    After having drilled 20 cm, it is necessary to reduce on each side of the pattern 1 st in every 6 rows( 16 times).In total there will be 80 items.

    Having probed 54 cm from the beginning, it is necessary to tie a circle for 1 person., Adding 18 points( not in the pattern).Total was 98 items.

    To knit another 8 cm, tying the pattern on the first 8 sts, the others knit with an elastic band 2 hp.2 digits, then close.

    These are the knitted leggings with knitting needles with the description of which we have read above.

    A more complex way for experienced

    What is needed

    • 100% yarn yarn;
    • Spokes No. 7.

    Density must be 6 pts = 1 cm.

    Size: in stretched form the circumference is 40 cm and length is about 70 cm.

    To make the gaiters fit for the girl, you just need to type a smaller number of loops multiple4( 4 loops = 3 cm in stretched form) and knit to the required length.

    Description

    Dial 46 items and make a circle from them.

    Knit 1,2 and 3 r: 2 dep., 2 l.etc. and so on.

    4, 5 and 6 r.: 1 l.etc., 2 of us.etc., 2 liters.etc., 2 out of the way, 2 liters.etc., and so on, when there are 3 points left to be knit: 2 out.etc., 1 liter. Item

    7,8 and 9 series: 2 liters.etc., 2 of us.etc. and continue to the end of the series.

    10, 11 and 12 series: 1 str.etc., * 2 liters.etc., 2 of us.n. *, repeat from * to * until when there are 3 points left on the spoke, which are knit: 2 l.etc., 1 of them.n.

    Repeat work from 1 row to 12 until the product is 75 cm long( or the desired length).

    Close the hinges.

    These gaiters for women turned out.

    You can associate these gaiters, they also knit quite simply.

    3rd method of manufacturing

    What is needed

    • Yarn, approximately 190 m thread;
    • Knitting needles No. 6( circular).

    Density: 24 p. And 16 p.are equal to a square of 10 × 10 cm.

    Size: width 27 cm, length 40 cm, diameter of the bottom rubber band 13 cm.

    Dial 48 pcs, connect and put a marker. Knit with an elastic band 2 hp through 2 hp.5 cm.

    Read more 10 cm on the pattern:

    1: 2 hp, hpfor the rear wall, 1 ap.and so continue to the end of the series.

    2: 2 pcs., Nakid, hp, out of.etc. and continue to the end of the series.

    3: 3 bp, rel.etc. and continue to the end of the series.

    4: 1 hp, crochet, 2 pcs behind the back wall, new.etc. and continue to the end of the series.

    After the pattern is 10 cm, start adding loops, you need to add it in every fourth p.from both sides of the marker to 1 pt. Repeat 8 times, 64 pts will be produced.

    Continue to knit with a pattern. After running 30 cm, you need to start removing the loops from the marker on both sides by 1 st in each 2 rows. Repeat 2 times, should be 60 pcs.

    Knit with an elastic band 10 cm.

    These leggings turned out.

    Interesting video-selection on the topic of the article

    Leggings are a favorite part of the wardrobe of many ladies. They can be purchased at the store, or you can link them yourself. For this, the master class "gaiters with knitting needles" with the schemes that will help in the work is given below.

    The easiest way

    What is needed

    • Yarn 350 g;
    • Spokes 3,5 mm.

    The length of the product is approximately 62 cm.

    The density should be 30 p.and 22 pts are equal to a square of 10 × 10 cm.

    Below is a detailed description of how to bind gaiters with spokes.

    Description

    You need to knit from the top to the bottom of the gaiter in a circle.

    For this you need to dial 140 pcs and knit about 15 cm according to the scheme M1.

    Wrong place:

    Persons. Item:

    Remove before work on extra.knitting needle 2 pt., knit 2 next l.etc., then 2 liters.with add.knitting needles.

    Continue knitting this way:

    To knit the first 8 st under the scheme, the rest of the loops to knit with garter stitching, tying at the same time.2 p. In each pigtail( except those that are in the middle from the back side).The hinges should be 114.

    Having knitted 20 cm, it is necessary to reduce on each side of the pattern 1 st in every 6 rows( 16 times).In total there will be 80 items.

    Having probed 54 cm from the beginning, you need to lap the faces. 1, adding 18 points( not in the pattern).Total was 98 items

    To knit another 8 cm, tying the pattern on the first 8 sts, the others knit with an elastic band 2 hp.2 digits, then close.

    These are the knitted leggings with knitting needles with the description of which we have read above.

    More complicated method for experienced

    What is needed

    • 100% yarn yarn;
    • Spokes number 7.

    Density should be 6 pts = 1 cm.

    Size: in stretched form the circumference is 40 cm, and length is about 70 cm.

    To make the gaiters fit for the girl, you just need to type a smaller number of loops multiple4( 4 loops = 3 cm in stretched form) and knit to the required length.

    Description

    Dial 46 items and make a circle of them.

    Knit 1,2 and 3 r: 2 dep., 2 l.etc. and so on.

    4, 5 and 6 r.: 1 l.etc., 2 of us.etc., 2 liters.etc., 2 out of the way, 2 liters.etc., and so on, when there are 3 points left to be knit: 2 out.etc., 1 liter.

    7.8 and 9 series: 2 liters.etc., 2 of us.etc. and continue to the end of the series.

    10, 11 and 12 series: 1 str.etc., * 2 liters.etc., 2 of us.n. *, repeat from * to * until when there are 3 points left on the spoke, which are knit: 2 l.etc., 1 of them.

    Repeat the work from 1 row to 12 until the product is 75 cm long( or the correct length).

    Close the hinges.

    These gaiters for women turned out.

    You can associate these leggings, they also knit quite simply.

    3rd method of manufacturing

    What is needed

    • Yarn, approximately 190 m thread;
    • Knitting needles No. 6( circular).

    Density: 24 p. And 16 p.are equal to a square of 10 × 10 cm.

    Size: width 27 cm, length 40 cm, diameter of the bottom rubber band 13 cm.

    Dial 48 pcs, connect and put a marker. Knit with an elastic band 2 hp through 2 hp.5 cm.

    Read more 10 cm on the pattern:

    1: 2 hp, hpfor the rear wall, 1 ap.and so continue to the end of the series.

    2: 2 pcs., Crochet, lp, out of.etc. and continue to the end of the series.

    3: 3 bp, out.etc. and continue to the end of the series.

    4: 1 hp, crochet, 2 pcs behind the rear wall, new.etc. and continue to the end of the series.

    After the pattern is 10 cm, begin adding loops, for this you need to add in every fourth p.from both sides of the marker to 1 pt. Repeat 8 times, 64 pts will be produced.

    Continue to knit with a pattern. After running 30 cm, you need to start removing the loops from the marker on both sides by 1 st in each 2 rows. Repeat 2 times, it should turn out 60 pcs.

    Knit with an elastic band 10 cm.

    These gaiters have turned out.

    Interesting video-compilation on the topic of the article