womensecr.com

Crafts from origami paper by own hands: modular schemes and video for children

  • Crafts from origami paper by own hands: modular schemes and video for children

    click fraud protection

    Origami origami crafts: a step-by-step instruction on how to make a bull and flower

    Origami is an ancient Eastern technique of folding paper figures. This occupation is of interest to both adults and children. For adults, this is a pleasant time, and for the younger generation, a stimulant for developing skills and motor skills. At us it is possible to find various schemes of hand-made articles from a paper of origami by own hands, therefore everyone can learn this art.

    If you repeat each step, just like on the diagram, then you will get the correct model. If you are a beginner, then to make a figure of the necessary sample, you can see the video "hand-made paper origami" at the end of this article.

    To begin with, you need to determine how you will work with the paper. There are several types of origami:

    • Simple origami. Folding of simple figures according to diagrams and drawings.
    • Origami from modules. Folding of original figures from small parts.
    • Pattern. Flexing and shaping the shape of the basic bends
    • Wet origami. Working with wet paper.
    instagram viewer

    You can try all kinds of origami to find the right one. To begin with, try the origami of simple figures, for example, a bull.

    Step-by-step instruction on how to make a bull of paper

    Bend the square diagonally. Bend the sides along the planned lines and flip the workpiece.

    The sides bend along the center line, without bending the triangles from the other side. Fold the workpiece in half.

    Fold the figure along the lines and pull out the triangles on the opposite side.

    Bend the bottom of the figure up.

    Fold the tops down on both sides.

    Hide the sides of the four triangles inside. Thus, the sharp corners should be at the bottom.

    Make it so that the triangles in front and behind are inside.

    A layer of paper from above, bend to the bend line of the vertical. On the top should be two pockets.

    On the sides, bend the triangles inward and stick them out.

    Wrap back the future nose.

    At the base of the horn, bend the two small triangles. Do the same with the other side.

    Bend one layer of paper so that the horn is thinner.

    Turn the ends of the horns outward.

    Bend all the layers of the workpiece as indicated in the diagram. Stretch the figure.

    Near the front legs, bend the paper as shown. Make the tail thin and the tips of the legs bend inward, opening them completely. It turned out to be a paper bull.

    Such animals are made simply and at observance of all stages look attractive enough. More details on the video:

    More complex and painstaking work is considered origami from the modules.

    Flower in modular technique

    To make a flower from the parts, you first need to prepare the modules:

    MK for the manufacture of

    modules Cut the A-4 format sheet into 16 squares. Fold the box horizontally, then vertically. Fold the corners along the vertical fold line.

    Turn over the workpieces, tuck the free sides into a triangle. Corner wrap for the basis.

    Unscrew the bottom strip and secure the small corners. Bend back.

    When the modules are ready, you can start forming a flower that will consist of 20 parts.

    We form the flower

    Place the module on the short side. The corners of the two modules are hidden in the pockets of one.

    The third row is assembled, placing the module on a long base. Mounting must occur in staggered order. Turn the flower over and string the modules on the short side. The fourth row consists of 10 modules.

    The fifth row is stringed into two modules so that the free pocket is inside. It will take 20 parts.

    The sixth row should consist of 30 modules. Three modules are put on two parts.

    It remains to make a stalk from a tube for drinks. It can be attached with tape or tape. You can cut out leaflets from green paper.

    Modular origami looks more realistic and more solid than simple. You may not get the right design right away, but from the second time it will be exactly right. Just in case, check out the video below.

    For children, figurines made of paper seem to be something wonderful and mysterious. After all, when a dog or a basket appears from a simple sheet, it really seems like a fairy tale, and the master is a magician. Successful work to you, dear readers!

    Origami is an ancient Eastern technique of folding paper figures. This occupation is of interest to both adults and children. For adults, this is a pleasant time, and for the younger generation, a stimulant for developing skills and motor skills. At us it is possible to find various schemes of hand-made articles from a paper of origami by own hands, therefore everyone can learn this art.

    If you repeat each step, just like in the diagram, then you will get the correct model. If you are a beginner, then to make a figure of the necessary sample, you can see the video "hand-made paper origami" at the end of this article.

    To begin with, you must determine how you will work with the paper. There are several types of origami:

    • Simple origami. Folding of simple figures according to diagrams and drawings.
    • Origami from the modules. Folding of original figures from small parts.
    • Pattern. Bending and shaping the figure on the basic bends
    • Wet origami. Working with wet paper.

    You can try all kinds of origami to find the right one. To begin with, try the origami of simple figures, for example, a bull.

    Step-by-step instruction on how to make a bull of paper

    Bend the square diagonally. Bend the sides along the planned lines and flip the workpiece.

    The sides bend along the center line, without bending the triangles from the other side. Fold the workpiece in half.

    Fold the figure along the lines and pull out the triangles on the opposite side.

    Bend the bottom of the figure up.

    Fold the tops down on both sides.

    Hide the sides of the four triangles inside. Thus, the sharp corners should be at the bottom.

    Make it so that the triangles in front and behind are inside.

    The top layer of the paper is bent to the bend line of the vertical. On the top should be two pockets.

    On the sides, bend the triangles inward and stick them out.

    Wrap back the future nose.

    At the base of the horn, bend the two small triangles. Do the same with the other side.

    Bend one layer of paper so that the horn is thinner.

    The ends of the horns turn outward.

    Bend all layers of the workpiece as indicated in the diagram. Stretch the figure.

    Near the front legs, bend the paper as shown in the picture. Make the tail thin and the tips of the legs bend inward, opening them completely. It turned out to be a paper bull.

    Such animals are made simply and at observance of all stages look attractive enough. More details on the video:

    More complex and painstaking work is considered origami from the modules.

    Flower in modular technique

    To make a flower from parts, you first need to prepare the modules:

    MK for the manufacture of

    modules Cut the A-4 format sheet into 16 squares. Fold the box horizontally, then vertically. Fold the corners along the vertical fold line.

    Turn over the workpieces, tuck the loose sides onto the triangle. Corner wrap for the basis.

    Remove the lower strip and fix the small corners. Bend back.

    When the modules are ready, you can start forming a flower, which will consist of 20 parts.

    We form the flower

    Place the module on the short side. The corners of the two modules are hidden in the pockets of one.

    The third row is assembled, placing the module on a long base. Mounting must occur in staggered order. Turn the flower over and string the modules on the short side. The fourth row consists of 10 modules.

    The fifth row is stringed into two modules so that the free pocket is inside. It will take 20 parts.

    The sixth row should consist of 30 modules. Three modules are put on two parts.

    It remains to make a stalk from a tube for drinks. It can be attached with tape or tape. You can cut out leaflets from green paper.

    Modular origami looks more realistic and more solid than simple. You may not get the right design right away, but from the second time it will be exactly right. Just in case, check out the video below.

    For children, figurines made of paper seem to be something wonderful and mysterious. After all, when a dog or a basket appears from a simple sheet, it really seems like a fairy tale, and the master is a magician. Successful work to you, dear readers!