womensecr.com

Embroidery with ribbons for beginners: free schemes, mk and video

  • Embroidery with ribbons for beginners: free schemes, mk and video

    click fraud protection

    Ribbon embroidery for beginners: a description of the basic stitches and video lessons

    Ribbon sewing is a kind of needlework that allows you to create beautiful products with satin ribbons. In order to make the paintings really good, beginner needlewomen need to observe some rules of embroidery. And in order to simplify the task, you should also watch the video for beginners embroider with ribbons, which step by step describes what you should do.

    Materials and devices for embroidery with ribbons

    The basis for work on embroidering ribbons is the fabric on which the pattern is applied. It should be strong, so that it is easy to fix the stitches and the needle must pass through the surface freely. Embroidery can be performed on both clean fabric and print, which is prepared in advance.

    Tapes can choose any colors, but it is best to use satin ribbons or silk. The width of the tape is from 2 mm to 50 mm, but the most popular tape is 7-25 mm wide.

    An important accessory for work is the embroidery frame, which hold the canvas during embroidery. And, of course, needles - they should be with a wide eyelet, so that you can freely thread the tape. The length and thickness should fit the thickness of the fabric.

    instagram viewer

    How to insert the ribbon correctly in the

    needle Before starting to embroider with satin ribbons, for beginners, it is better to study some rules on the correctness of threading the tape in the needle. So, the first thing to do is to cut one end of the tape. To prevent its spreading, you can burn ends with a lighter.

    The cut end is inserted into the eye of the needle and, having deviated from the edge of the tape 1-1.5 cm, insert the needle into the tape in the center. We should have a sailboat.

    We take hold of the tip of the needle and pull it to the end for the second long end of the tape we burned.

    Tape width of 2-4 mm at the end is simply tied with a knot. Tapes wider than 5 mm should preferably be fastened to the end by a flat knot with a "cushion".Fold the scorched edge of the tape 1-2 times( the width of the bend is about 1 cm) and, piercing the needle through the "pad" in the center, pull it through to the end.

    Seams( stitches)

    Embroidery with ribbons with a variety of seams to us became available with the advent of translations of foreign books. Therefore, there are differences in the names of the seam or the difference in the translations.

    Straight stitch.

    It's a regular tape. Push the needle to the front side, straighten the ribbon. The free scheme will show how.

    Put the needle on the wrong side, holding it to prevent it from twisting. The stitch can be varied in volume, slightly tightening along the length.

    Having executed several such stitches in series, we can embroider a fence, steps, roof, fish scales, feathers. Embroidering stitches in a circle, we get a flower, an ornament-leaf. It remains only to choose the desired color and width of the ribbon, and you can embroider the picture completely only with this stitch.

    Ribbon with curl( Japanese stitch).

    It is carried out by removing the tape on the wrong side through the tape itself. Thus, you can adjust the splendor of the stitch, its sharpness and slope. Bring the tape to the front side, straighten it and insert it into the center of the ribbon. Tighten on the wrong side can not be fully finished, and the stitch will be blunt or even. Or tighten, as they say, until it stops, and the stitch will acquire a sharp curl. You can pierce the tape and not in the center. Insert the needle at the very edge of the tape, and the stitch will be sharp, beveled diagonally.

    Application of all variants of the Japanese stitch can be seen on the bell example. The lower stitch is centered, then the two stitches are removed at the edges, the upper stitch is not tightened to the center, forming a "pipe" or "even curl".

    Twisted stitch "(stitch" stalk ").

    Pull the tape over your face and scroll the needle in your fingers. The ribbon twists.

    The stalk is ready. The ribbons themselves can be embroidered with flowers, for example, clover or asters. But for this you need to take the thinnest ribbon with a width of 2-4 mm. Twisted decorative small roses embroidered with a ribbon. Also often occurs in the performance of a twisted tape basket under embroidered flowers. Here imitation of the real weaving of the vine is used.

    You can watch video on how to embroider ribbons for beginners, learn all the nuances of embroidery ribbons.

    Interesting video compilation for beginners

    So what a nice view and good pictures.

    Ribbon sewing is a kind of needlework that allows you to create beautiful products with satin ribbons. In order to make the paintings really good, beginner needlewomen need to observe some rules of embroidery. And in order to simplify the task, you should also watch the video for beginners embroider with ribbons, which step by step describes what you should do.

    Materials and devices for embroidering with ribbons

    The basis for work on embroidering ribbons is the fabric on which the pattern is applied. It should be strong, so that it is easy to fix the stitches and the needle must pass through the surface freely. Embroidery can be performed on both clean fabric and print, which is prepared in advance.

    Tapes can choose any colors, but it is best to use satin ribbons or silk. The width of the tape is from 2 mm to 50 mm, but the most popular tape is 7-25 mm wide.

    An important accessory for work is the embroidery frame, which hold the canvas during embroidery. And, of course, needles - they should be with a wide eyelet, so that you can freely thread the tape. The length and thickness should fit the thickness of the fabric.

    How to insert the ribbon correctly in the

    needle Before starting to embroider with satin ribbons, for beginners, it is better to study some rules on the correctness of threading the tape in the needle. So, the first thing to do is to cut one end of the tape. To prevent its spreading, you can burn ends with a lighter.

    The cut end is inserted into the eye of the needle and, having deviated from the edge of the tape 1-1.5 cm, insert the needle into the tape in the center. We should have a sailboat.

    Take hold of the tip of the needle and pull to the end for the second long end of the tape that we set on.

    Tape width of 2-4 mm at the end is simply tied with a knot. Tapes wider than 5 mm should preferably be fastened to the end by a flat knot with a "cushion".Fold the scorched edge of the tape 1-2 times( the width of the bend is about 1 cm) and, piercing the needle through the "pad" in the center, pull it through to the end.

    Seams( stitches)

    Embroidery with ribbons with a variety of seams to us became available with the advent of translations of foreign books. Therefore, there are differences in the names of the seam or the difference in the translations.

    Straight stitch.

    It's a normal tape. Push the needle to the front side, straighten the ribbon. The free scheme will show how.

    Put the needle on the wrong side, holding it to prevent it from twisting. The stitch can be varied in volume, slightly tightening along the length.

    Having executed several such stitches in series, we can embroider a fence, steps, roof, fish scales, feathers. Embroidering stitches in a circle, we get a flower, an ornament-leaf. It remains only to choose the desired color and width of the ribbon, and you can embroider the picture completely only with this stitch.

    Ribbon with curl( Japanese stitch).

    It is carried out by removing the tape on the wrong side through the tape itself. Thus, you can adjust the splendor of the stitch, its sharpness and slope. Bring the tape to the front side, straighten it and insert it into the center of the ribbon. Tighten on the wrong side can not be fully finished, and the stitch will be blunt or even. Or tighten, as they say, until it stops, and the stitch will acquire a sharp curl. You can pierce the tape and not in the center. Insert the needle at the very edge of the tape, and the stitch will be sharp, beveled diagonally.

    Application of all variants of the Japanese stitch can be seen on the bell example. The lower stitch is centered, then the two stitches are pulled out along the edges, in the center the upper stitch is not tightened to the end, forming a "pipe" or "even curl".

    Twisted stitch "(stitch" stalk ").

    Pull the tape over your face and scroll the needle in your fingers. The ribbon twists.

    The stalk is ready. The ribbons themselves can be embroidered with flowers, for example, clover or asters. But for this you need to take the thinnest ribbon with a width of 2-4 mm. Twisted decorative small roses embroidered with a ribbon. Also often occurs in the performance of a twisted tape basket under embroidered flowers. Here imitation of the real weaving of the vine is used.

    You can watch a video about how to embroider ribbons for beginners, learn all the nuances of embroidery ribbons.

    Interesting video compilation for beginners

    So what a nice view and good pictures.