Origami aircraft: diagram, step-by-step photo and video of work progress
Origami aircraft: simple variant and modular( for more experienced ones), circuits and video are attached.
The aircraft is quite a new invention of mankind, therefore it does not bear any symbolic load. However, some people consider the aircraft a symbol of material prosperity, wealth and luxury, while others - a symbol of high goals. There are different options, how to fold origami aircraft, the scheme in each case will also be different. Choose the one that you like in level and taste and start working.
Simple airplane
One of the easiest options for folding an airplane made of paper. Repeating the scheme a couple of times, you can already easily and spy to recreate it.
Airplanes made under this scheme, flying, they are very fun to run children or the whole family.
- The rectangular sheet is folded in length in half. Fold properly bend in both directions.
- From the beginning of the fold on the left, add the corners of the rectangle to the center so that the fold line and the edges of the triangle sheet coincide.
- The sheet of paper is folded across, retreating a couple of centimeters from the straight, which was obtained after bending the corners.
- From the beginning of the straight line to the left, bend the corners of our new rectangle to the center, forming a right angle.
- Bend the facing corner to the top.
- On the central line we bend the plane in the opposite direction and form the wings.
- The plane is ready.
If you have any questions during the process, use the video lesson on the folding of this aircraft.
Aircraft from
modules Modular origami is called so because the whole figure consists of small parts-triangles-modules. From them you can collect any figure. For example, the same plane.
Choose thick paper so that the craft is strong. The A4 sheet is divided into equal rectangles, depending on the size of the modules we want to get.
The module itself is assembled according to this scheme.
Rectangle is folded along in half.
We bend and unbend it across, marking the middle line.
We bend the edges to this middle.
Turning.
The protruding edges are bent upwards.
Small corners bend through a large triangle.
Unbend.
Again, we bend the small triangles along the lines previously outlined and bend the edges upwards.
Fold the triangle in half.
We will have a module that has two corners and two pockets.
Modules can be inserted into each other in various ways, for example, so.
It turns out a real designer, which is easy to disassemble and create a new sculpture.
The plane is as follows:
The first two rows of 25 modules are assembled on the short side, the 3rd row is done as usual. We close the rows in the ring.
The fourth row is collected as usual.
We turn out the structure.
Thus we collect up to 16 rows. Begin to do the seating, as in the picture.9 rows.
We collect further.22 row fixes the seat back of the aircraft.
The total is 22 rows of 25 modules. To the 34th row, we need to reduce the number of modules to 16. To do this, we compile the subsequent rows, reducing the number of modules by two in each. This is done through one row, following by fixing the gaps, so that the constriction is not sharp.
From the top and the sides we make cuts for the tail.
By reducing the number of modules to the end, we make 10 rows.
Next, make the wings of the aircraft.
We collect them from the modules in the way shown in the picture. For the strength of fastening, you can grease them with glue.
We make 3 such details for the tail.
By the same principle, we collect the lower wings.
We connect the wings together, both upper and lower.
We insert the tail sections into the sections on the body.
Fasten the modules to the short side, 2 rows.
To dangle the tail, glue with glue.
We collect floats: 9 modules of 15 rows on the short side.
We glue the bottom wings to the body.
We collect and glue the screw.
Shashlyk skewers connect the floats, attach them to the body. In places of puncture for durability abundantly we glue with glue.
Also on skewers put on the upper wings, attach to the structure.
Insert two more skewers between the wings. Crop the sticking pointed ends.
The plane is ready.
You can also perform in the origami technique fighter aircraft, video of these lessons are attached. Here you will need a higher skill level of this skill.
And such X-Wing at last:
The aircraft is quite a new invention of mankind, therefore it does not bear any symbolic load. However, some people consider the aircraft a symbol of material prosperity, wealth and luxury, while others - a symbol of high goals. There are different options, how to fold origami aircraft, the scheme in each case will also be different. Choose the one that you like in level and taste and start working.
Simple airplane
One of the easiest options for folding an airplane made of paper. Repeating the scheme a couple of times, you can already easily and spy to recreate it.
Airplanes made under this scheme, flying, they are very fun to run children or the whole family.
- Rectangular sheet is folded in length in half. Fold properly bend in both directions.
- From the beginning of the fold on the left, add the corners of the rectangle to the center so that the fold line and the edges of the triangle sheet coincide.
- The sheet of paper is folded across, retreating a couple of centimeters from the straight line, which was obtained after bending the corners.
- From the beginning of the straight line to the left, bend the corners of our new rectangle to the center, forming a right angle.
- Bend the facing corner to the top.
- On the central line we bend the plane in the opposite direction and form the wings.
- The plane is ready.
If you have any questions during the process, use the video lesson on the folding of this aircraft.
The plane from the
modules Modular origami is called so because the whole figure consists of small parts-triangles-modules. From them you can collect any figure. For example, the same plane.
Choose thick paper to make the article durable. The A4 sheet is divided into equal rectangles, depending on the size of the modules we want to get.
The module itself is assembled according to this scheme.
Rectangle is folded along in half.
We bend and unbend it across, marking the middle line.
To this middle we bend the edges.
Turning.
The protruding edges are bent upwards.
Small corners bend through a large triangle.
Unbend.
Again, we bend the small triangles along the lines previously outlined and bend the edges upwards.
Fold the triangle in half.
We will have a module that has two corners and two pockets.
Modules can be inserted into each other in various ways, for example, so.
It turns out a real designer, which is easy to disassemble and create a new sculpture.
The plane is as follows:
The first two rows of 25 modules are assembled on the short side, the third row is done as usual. We close the rows in the ring.
The fourth row is collected as usual.
We turn out the structure.
So we collect up to 16 rows. Begin to do the seating, as in the picture.9 rows.
We collect further.22 row fixes the seat back of the aircraft.
The total is 22 rows of 25 modules. To the 34th row, we need to reduce the number of modules to 16. To do this, we compile the subsequent rows, reducing the number of modules by two in each. This is done through one row, following by fixing the gaps, so that the constriction is not sharp.
From above and along the sides we make cuts for the tail.
By reducing the number of modules to the end, we make 10 rows.
Next, make the wings of the aircraft.
We collect them from the modules in the way shown in the picture. For the strength of fastening, you can grease them with glue.
We make 3 such details for the tail.
By the same principle, we collect the lower wings.
We connect the wings together, both upper and lower.
We insert into the sections on the body of the tail parts.
Fasten the modules to the short side, 2 rows.
To dangle the tail, glue with glue.
We collect floats: 9 modules of 15 rows on the short side.
We glue the bottom wings to the body.
We collect and glue the screw.
Combine the floats with kebab skewers, attach them to the body. In places of puncture for durability abundantly we glue with glue.
Also on the skewers put on the upper wings, attach to the structure.
Insert two more skewers between the wings. Crop the sticking pointed ends.
The plane is ready.
You can also perform in the origami technique fighter aircraft, video of these lessons are attached. Here you will need a higher skill level of this skill.
And such X-Wing at last: