Teddy bear: pattern and master class, as well as a video compilation

The soft toy "bear" was, probably, every child. Therefore, the teddy bear sewn by the hands: a pattern, the master class of which is given below, will certainly cause nostalgia for you.

Master class with step-by-step photos

What is needed

• Pattern;
• Pins;
• Fabric;
• Sushi stick;
• Beads;
• Threads.

A teddy-teddy bear whose pattern is below( and you can take it from this article), it will definitely work out even for those who decided to make a toy for the first time.

Pattern:

Detailed work description

Fold the fabric face-down in 2 layers. To lay out her patterns with an allowance of 0.5 cm. Pin with pins and traverse the outline. Remove the patterns and chop the fabric so that the pins are inside the parts. This should be done so that when sewing pins do not interfere and do not damage the machine.

Sew the details, remember to leave the hole about 1.5 cm for stuffing. It is better to sew out the dent on the head later - after all the details have been cut out. It is very important to fix the stitch near the hole so that when threading the thread does not open.

Cut out the details.

Circle a dart on the head from the back, swipe and stitch.

Now the details need to be unscrewed. In this you will help the stick for the land. Look at the following photos.

You need to tighten it.

After filling the parts, you need to sew the holes manually with a hidden seam.

Poke your head with pins and sew with a hidden seam.

Bend up to the desired size the allowance of the ears and tighten smoothly.

Peg behind the back of the pins to the head.

Sew in a hidden seam.

To sew the paws, you need a strong thread. Insert the needle into the seam on the neck and pull it out on the trunk in the place where the upper leg will be.

Pierce the paw, hook the bead and return to the same hole in the paw.

Then again in the same hole in the trunk. Sew on the second paw, piercing through the trunk. Stitch several times. Then pull out the needle under the paw and wrap 5 times around the thread between the body and the foot, just do with the 2 paws. Secure under the neck. To keep your feet dangling, you need to tighten it well.

When it comes to the lower paws, you first need to stick a needle in the trunk and leave a tail. Sew first the paw on the other side, and then from the side with which the tail remained. Repeat several times. Bring the thread to the tail and tighten, tightly tying.

To sew eyes, you need to stick a needle into the seam on the back of the neck, bring it to the place where the eye will be, put a bead on it, bring it back under the second eye, plant the bead and tighten it a little.

Embroider your nose.

Pick up a ribbon and sew it from the back.

Tie in front.

These are such bears.

You can paint this bear with coffee, and you will get a coffee bear.

For example, like this:

Related videos of the article