Fur vest with your own hands: patterns 48, 42, 52 sizes
Fur vest with your own hands: patterns for a girl with a detailed description of sewing, photos and videos
Fur vests become relevant in the off-season and winter. They are combined with skirts, trousers, jeans. In them it is convenient to skate or ski, do a morning run. They are convenient for motorists. In general, the thing is necessary. Sewing yourself a fur vest with your own hands, the patterns of which will be presented below, is quite simple.
Baby vests made of fur
Let's take a closer look at the pattern for a girl. To sew a vest you can take a pattern from the magazine or transfer to the paper the item of the child of the desired size with an allowance of 2 cm. For sewing, we will use corduroy with a high content of cotton and artificial fur. This is how the back from the fabric looks.
Two shelves handed over.
Patterns for the lining are used the same.
Cleaving and then grinding the top and side seams, distance to the seam from the edge of 1 cm.
Quilting the sintepon with the lining. Sweep the lateral and upper seams of the gear and the back of the lining.
Place the lining under the waistcoat and straighten all the wrinkles, remove the bumps. Apply neatly all sections and secure with needles.
Place the lining on the sewing machine. Cut out the fur strip width of 5 cm, pin it to the edge and stitch it.
Make the belt.
This turned out to be a veinlet.
And such a pattern can be used to sew a fur vest or fur trim for a boy.
Working with a pattern for a vest of fur
1. To sew a vest, you will need fur, fabric for a lining and a heater( batting or sintepon).It is advisable for novice needlewomen to not touch the natural material. The pattern of a vest made of artificial fur, which they will be able to master, will be just right. Such a fur looks good, only worn less.
2. The cost of artificial fur and lining are calculated the same. For small and medium sizes, one length is + 5 cm, for a three-dimensional figure - one length + 30 cm.
3. It is better to take the measurements in the clothes for which the vest is to be worn. Fur gives a "splendor" to the figure, so the product should not be free. Due to the latter fact, it is sometimes sewn without fasteners and, the more so, the smell. The distance between the sides is allowed up to 10 cm.
4. Construction of darts:
- for 42 size tucks on the chest do not;
- for 48 sizes is their presence and absence;
- for 52 sizes of trowels are always needed.
5. Cutting of artificial fur.
Edge of the lining.
Cut the fur into one layer, and the lining - folding in half. The allowances for the seams are 1 cm, on the bottom - up to 4 cm. The fur with long nap is worn openly, with short and medium - under the clothes. About how to cut the fur, look here.
Pattern for men
Pattern of vest for men from natural fur in the photo and video below.
Video for
Vest of a fur vest:
How to make a transformer
Vest-transformer pattern:
- for fabric products
- for knit
Tips for sewing from an old fur coat
- Prepare fur, cut all the seams. Remove pockets, buttons, zippers, etc.
- Spread out the details on the table.
- All worn sections are cut and re-cut back and transfer shelves.
- Shabby places can be replaced with rectangular patches. On the finished model, they will not be visible.
Fur vests become relevant in the off-season and winter. They are combined with skirts, trousers, jeans. In them it is convenient to skate or ski, do a morning run. They are convenient for motorists. In general, the thing is necessary. Sewing yourself a fur vest with your own hands, the patterns of which will be presented below, is quite simple.
Baby vests made of fur
Let's take a closer look at the pattern for a girl. To sew a vest you can take a pattern from the magazine or transfer to the paper the item of the child of the desired size with an allowance of 2 cm. For sewing, we will use corduroy with a high content of cotton and artificial fur. This is how the back from the fabric looks.
Two transfer shelves.
Patterns for the lining are used the same.
Cleaving and then grinding of the top and side seams, distance from the seam to the seam from the edge of 1 cm.
Quilting the sintepon with the lining. Sweep the lateral and upper seams of the gear and the back of the lining.
Place the lining under the vest and straighten all wrinkles, remove the bumps. Apply neatly all sections and secure with needles.
Place the lining on the sewing machine. Cut out the fur strip width of 5 cm, pin it to the edge and stitch it.
Make the belt.
This turned out to be a vest.
And this pattern can be used to sew a fur vest or a fur trim for a boy.
Working with a pattern for a fur vest from
1. To sew a vest, you will need fur, fabric for the lining and a heater( batting or sintepon).It is advisable for novice needlewomen to not touch the natural material. The pattern of a vest made of artificial fur, which they will be able to master, will be just right. Such a fur looks good, only worn less.
2. The cost of artificial fur and lining are calculated the same. For small and medium sizes, one length is + 5 cm, for a three-dimensional figure - one length + 30 cm.
3. It is better to take the measurements in the clothes for which the vest is to be worn. Fur gives a "splendor" to the figure, so the product should not be free. Due to the latter fact, it is sometimes sewn without fasteners and, the more so, the smell. The distance between the sides is allowed up to 10 cm.
4. Construction of darts:
- for 42 size tucks on the chest do not;
- for 48 sizes is their presence and absence;
- for 52 sizes of trowels are always needed.
5. Cutting of artificial fur.
Lining of the lining.
Cut the fur into one layer, and the lining - folding in half. The allowances for the seams are 1 cm, on the bottom - up to 4 cm. The fur with long nap is worn openly, with short and medium - under the clothes. About how to cut the fur, look here.
Pattern for men
A vest of men's vests made of natural fur in the photo and video below.
Video for
Vest of a fur vest:
How to make a transformer
Vest-transformer pattern:
- for fabric products
- for a knitted thing
Tips for sewing from an old fur coat
- Prepare a fur, cut all the seams. Remove pockets, buttons, zippers, etc.
- Spread out the details on the table.
- All worn sections are cut and re-cut back and transfer shelves.
- Shabby places can be replaced with rectangular patches. On the finished model, they will not be visible.