Bag the refrigerator by own hands: how to make most( photo and video)
Bag refrigerator yourself: instructions how to make yourself
With the advent of winter, you can start preparing for the next summer season and outdoor recreation. A very useful thing for camping enthusiasts and tourist trips is a refrigerator bag with its own hands made by simple instruction that has been tested and approved by many travelers.
How to make a refrigerator bag
Unlike branded purchases, a cooler bag made by oneself will cost you quite inexpensively, only public materials and fabrics are needed. You just need to know the instructions how to make a refrigerator bag by yourself. Let's start by watching the training video:
The performance of the homemade refrigerator bag is almost the same as the quality of the shopping bags, and it can be safely said that:
- If in the summer heat in the summer, put the frozen food in the refrigerator bag with plastic bottles or a heating padwith frozen salted water, we can talk about their safety for a long period of time.
- The refrigerator bag can be wrapped in a blanket, and even after thirty hours the products will remain cool.
How to make a refrigerator bag
The first thing you need to find the bag for a refrigerator, it can be anything, the main thing is that there were pens. Based on the size of the bag get a heater. It will be foamed polyethylene with one-sided foil spraying. This is used for insulation of thermal objects, and it can be purchased at the market of building materials. Usually the width of the sold polyethylene is one and a half meters. To cover the bag this width is enough with a surplus.
When purchasing polyethylene, choose the thickest - 10 mm. We will also need an adhesive tape to glue the foil. Before you sew a refrigerator bag, you first need to design the parts.
A cross is cut from the heater. In this case, the center of this cross will be the bottom of the bag, the side squares with walls, and the longest part is the fourth wall and the lid of the bag. Cutting the inner part for the bag, it is necessary to take into account that its size should be smaller than the base bag so that it easily fits inside.
You need to fold the square with the foil side inside. We glue the side parts with adhesive tape, both outside and inside for greater strength. At the same time, try to glue the walls as closely as possible to each other to ensure thermal insulation.
To cover the polyethylene cover better, you need to cut it off and stick it with adhesive tape. Since polyethylene is very thick, it does not bend well. Now left four squares of insulation, which were cut off at the corners of the cross. You need to bend each of them in half and glue tape to the corners of the box. Double walls will provide greater thermal insulation, which means that the products will be kept cooler for longer.
The resulting box is put in our bag. There will be small gaps between the walls of the bag and the enclosed structure. They can be filled with pieces of foam rubber or cotton wool, or other insulation material at your discretion. This ensures even greater insulation of heat, as well as the safety of the refrigerator bag. For a refrigerator bag, you need constant sources of cold. Again, you can also make a coolant to your refrigerator bag. It is done very simply: you need to take a plastic bottle or heating pad and pour salt solution into it in the ratio of 6 tablespoons to 1 liter of water. Frozen containers should be placed in a bag, and a long cold is provided to you.
Some tips for using a refrigerator bag
- Plastic containers with frozen salt water should be placed in a bag at a distance of ten to fifteen centimeters from each other.
- All products that are put in a bag, you need to wrap a newspaper or paper.
- Products are laid tightly, without large gaps, leaving no free space in the bag.
- Before you close the lid of the bag, you should put paper or several towels on it.
- Close the covers of the insulation and the bag itself tightly, and do not open too often, to avoid loss of cold.
As it was possible to be convinced, the bag-refrigerator made by own hands, does not concede at all to the characteristics of a factory bag, therefore safely start its manufacturing. Related Videos:
With the arrival of winter, you can start preparing for the next summer season and recreation in nature. A very useful thing for camping enthusiasts and tourist trips is a refrigerator bag with its own hands made by simple instruction that has been tested and approved by many travelers.
Unlike branded purchases, a cooler bag made by own hands will cost you quite inexpensively, you only need public materials and fabrics. You just need to know the instructions how to make a refrigerator bag by yourself. Let's start by watching the training video:
The performance of the homemade refrigerator bag is almost the same as the quality of the shopping bags, and it can be safely said that:
- If in the summer heat in the summer in the refrigerator bag place the frozen food, transferring them with plastic bottles or a heating padwith frozen salted water, we can talk about their safety for a long period of time.
- The refrigerator bag can be wrapped in a blanket, and even after thirty hours the products will remain cool.
How to make a cooler bag
The first thing you need to find the bag for a refrigerator, it can be anything, the main thing is that there are pens. Based on the size of the bag get a heater. It will be foamed polyethylene with one-sided foil spraying. This is used for insulation of thermal objects, and it can be purchased at the market of building materials. Usually the width of the sold polyethylene is one and a half meters. To cover the bag this width is enough with a surplus.
When purchasing polyethylene, choose the thickest - 10 mm. We will also need an adhesive tape to glue the foil. Before you sew a refrigerator bag, you first need to design the parts.
A cross is cut from the heater. In this case, the center of this cross will be the bottom of the bag, the side squares with walls, and the longest part is the fourth wall and the lid of the bag. Cutting the inner part for the bag, it is necessary to take into account that its size should be smaller than the base bag so that it easily fits inside.
You need to fold the square with the foil side inside. We glue the side parts with adhesive tape, both outside and inside for greater strength. At the same time, try to glue the walls as closely as possible to each other to ensure thermal insulation.
To cover the polyethylene cover better, you need to cut it off and stick it with adhesive tape. Since polyethylene is very thick, it does not bend well. Now left four squares of insulation, which were cut off at the corners of the cross. You need to bend each of them in half and glue tape to the corners of the box. Double walls will provide greater thermal insulation, which means that the products will be kept cooler for longer.
The resulting box is put in our bag. There will be small gaps between the walls of the bag and the enclosed structure. They can be filled with pieces of foam rubber or cotton wool, or other insulation material at your discretion. This ensures even greater insulation of heat, as well as the safety of the refrigerator bag. For a refrigerator bag, you need constant sources of cold. Again, you can also make a coolant to your refrigerator bag. It is done very simply: you need to take a plastic bottle or heating pad and pour salt solution into it in the ratio of 6 tablespoons to 1 liter of water. Frozen containers should be placed in a bag, and a long cold is provided to you.
Some tips for using a refrigerator bag
- Plastic containers with frozen salt water should be placed in a bag at a distance of ten to fifteen centimeters from each other.
- All products that are put in a bag, you need to wrap a newspaper or paper.
- Products are laid tightly, without large gaps, leaving no free space in the bag.
- Before you close the lid of the bag, you should put paper or several towels on it.
- Close the covers of the insulation and the bag itself tightly, and do not open too frequently to avoid loss of cold.
As it was possible to be convinced, the bag-refrigerator made by own hands, does not concede at all to the characteristics of a factory bag, therefore safely start its manufacturing. Related Videos: