womensecr.com

Flowers from the fabric with their own hands: a master class how to make a photo and video

  • Flowers from the fabric with their own hands: a master class how to make a photo and video

    Flowers from the fabric with their own hands: master class with photos, video

    Already the season rages the fashion for various ornaments from flowers: hair clips, brooches, wreaths, hairpins and rims with flowers. Master class flowers from the fabric with their own hands will teach you to easily and simply make a stylish decoration for every taste.

    Materials that you will need if you decide to tackle the fabric floristry

    1. Soldering iron 60 Watts and with a sharp section of 25 watts if you are going to use the Guilloche method.
    2. Rubber cushions with different softness.
    3. Cutters and pliers.
    4. Very sharp scissors for cutting out parts from fabric.
    5. Scissors for needlework.
    6. Silo and tweezers.
    7. Not acrylic paints for batik. Such produces, for example, the company "Gamma."
    8. Round soft synthetic brushes.
    9. Palette.
    10. Multicolored corrugated paper.
    11. Straight wire, not in reels.
    12. Line.
    13. Viscose cotton wool.
    14. Thick and liquid PVA adhesive.
    15. For patterns - thick cardboard.
    16. buy instagram followers
    17. For fastening of details: strong, reinforced threads( not ХБ), silicone pistol.
    18. Decor: beads, beads, feathers - whatever you want.
    19. Nutritional gelatin, without additives.
    20. Natural bleached silk for artists.

    Master-class: wedding flower with step-by-step photos

    How to make flowers from the fabric with their own hands we show on the example of a master class for the manufacture of a tender wedding flower decoration.

    Cut out an arbitrary number of drop-shaped petals with wavy edges from the transparent fabric. To begin with, you can make a pattern of the desired shape from a dense cardboard, and then use it to cut out the fabric.

    Fold the resulting blank in half.

    A thin piece of fabric, for example chiffon or organza, about 40x40 cm in size. Fold the fabric diagonally, and place the petal inwards so that the fold line coincides.

    Holding the petal to the table with your left hand, take the right edge of the fabric with your right hand. Gently pull, but do not release pressure on the petal with your left hand. Gradually write out your right hand semicircle from the thumb to the little finger. As the tissue will approach the little finger, gradually loosen the pressure of the left hand, allowing the workpiece to pop out from under the arm.

    If everything is right, we'll see small creases on the petal.

    Give it a wavy shape, gently pulling at the edges.

    Thread the feathers and beaded threads, which are prepared in advance, to the wire. This is the middle of the flower.

    To it, attach the petals in staggered order, make the leg as you are comfortable.

    Master-class: silk rosehip

    The products in this technique look very impressive, but in the photo they can not be distinguished from the living ones.

    From the shabotai( Chinese silk) carve petals like roses - in the form of hearts. For one flower you need 10 pieces. Leaves, gluing and a strip for a leg are cut out of sateen.

    We paint petals in your color, in our case - purple. Leaves, lining and legs are painted in green.

    When the leaves dry, glue it from the inside with a wire in the center and along the edge. For this we use PVA.

    We turn on soldering irons. Moisten the blanks on the towel. With a soldering iron without a nozzle, we heat the tweezers, which we give to the curved shape of the petals.

    Using the nozzle "wide Japanese foot," shape the petals, leaves and pads with a narrow paw with a groove.

    All parts are ready, you can collect a flower.

    From pre-prepared materials we form a bundle of stamens.

    Pair the glue the petals on the wire. It should be 5 pairs for one flower.

    Glue PVA collect inflorescence around stamens.

    Satin strip, which we have previously painted, glue the leg.

    Adhesion well spread out PVA and glue under the flower.

    We pierce the hole in the stem, apply the glue on the base of the sheet and insert it into the puncture. We fix for a while, letting the glue grab.

    The flower is ready.

    As well, having conceived to create flowers from the fabric with your own hands, video examples of some techniques will not be superfluous.

    Already the season rages the fashion for various ornaments from flowers: hair clips, brooches, wreaths, hairpins and rims with flowers. Master class flowers from the fabric with their own hands will teach you to easily and simply make a stylish decoration for every taste.

    Materials that you need if you decide to tackle the fabric floristry

    1. Soldering iron 60 Watts and with a sharp cross section of 25 watts if you are going to use the Guilloche method.
    2. Rubber cushions with different softness.
    3. Cutters and pliers.
    4. Very sharp scissors for cutting out parts from fabric.
    5. Scissors for needlework.
    6. Silo and tweezers.
    7. Not acrylic paints for batik. Such produces, for example, the company "Gamma."
    8. Round soft synthetic brushes.
    9. Palette.
    10. Multicolored corrugated paper.
    11. Straight wire, not in reels.
    12. Timber.
    13. Viscose cotton wool.
    14. Thick and liquid PVA adhesive.
    15. For patterns - thick cardboard.
    16. For fastening of details: strong, reinforced threads( not ХБ), silicone pistol.
    17. Decor: beads, beads, feathers - whatever you want.
    18. Food gelatin, without additives.
    19. Natural bleached silk for artists.

    Master-class: wedding flower with step-by-step photos

    How to make flowers from the fabric with their own hands we show on the example of a master class for the production of a tender wedding flower decoration.

    Cut out an arbitrary number of drop-shaped petals with wavy edges from the transparent fabric. To begin with, you can make a pattern of the desired shape from a dense cardboard, and then use it to cut out the fabric.

    Fold the resulting blank in half.

    A thin piece of fabric, for example chiffon or organza, about 40x40 cm in size. Fold the fabric diagonally, and place the petal inwards so that the fold line coincides.

    Holding the petal to the table with your left hand, take the right edge of the fabric with your right hand. Gently pull, but do not release pressure on the petal with your left hand. Gradually write out your right hand semicircle from the thumb to the little finger. As the tissue will approach the little finger, gradually loosen the pressure of the left hand, allowing the workpiece to pop out from under the arm.

    If everything is right, we'll see small creases on the petal.

    Give it a wavy shape, gently pulling at the edges.

    Thread the feathers and beaded threads, prepared in advance, to the wire. This is the middle of the flower.

    To it, attach the petals in staggered order, make the leg as you are comfortable.

    Master class: silk rosehip

    The products in this technique look very impressive, and in the photo they can not be distinguished from the living.

    From the shabotai( Chinese silk) carve petals like roses - in the form of hearts. For one flower you need 10 pieces. Leaves, gluing and a strip for a leg are cut out of sateen.

    We paint petals in your color, in our case - purple. Leaves, lining and legs are painted in green.

    When the leaves dry, glue it from the underside of the wire in the center and along the edge. For this we use PVA.

    We turn on soldering irons. Moisten the blanks on the towel. With a soldering iron without a nozzle, we heat the tweezers, which we give to the curved shape of the petals.

    Using the nozzle "wide Japanese foot", shape the petals, leaves and the gluing - a narrow paw with a groove.

    All parts are ready, you can collect a flower.

    From pre-prepared materials we form a bundle of stamens.

    Pair the glue the petals on the wire. It should be 5 pairs for one flower.

    Glue PVA collect inflorescence around the stamens.

    Satin strip, which we have previously painted, glue the leg.

    Adhesive is well smeared with PVA and glue under the flower.

    We pierce the hole in the stem, apply the glue on the base of the sheet and insert it into the puncture. We fix for a while, letting the glue grab.

    The flower is ready.

    As well, having conceived to create flowers from the fabric with your own hands, video examples of some techniques will not be superfluous.