Owl in the technique of modular origami: assembly scheme and manufacturing techniques with photos

In the art of modular origami, there are figures that even a child can make. Here is the scheme of assembling a modular origami owl is just such an example. It is also worth noting that, since it is considered the smartest bird, it will be an excellent symbol of any room.

How to make an owl from a paper

In order to make a paper figure from a paper, it is necessary to view the master class of the modular origami Owl and stock up the paper, in this case A4 and black paper will be used. You can use modules of different sizes, depending on which height the product wants to make.

So, let's start our modular origami: the owl baby is assembled from triangular modules measuring 7.5 by 5 cm, connected together.

In order to produce the first three rows, we will have to use 24 modules at once. To do this, it is necessary to connect the modules of 1 and 2 rows to each other, closing them eventually into a ring. After the ring is formed, it is necessary to put a long side upwards 3 row of modules.

Then the workpiece should be shaped into a bowl, for which you should turn it over and lightly push it into the middle of the product. Then follow four rows of 24 black modules, put on a long side outward.

For the production of the 8th row, 3 white modules and 21 black ones are used. It is with this series that the breast is assembled, the modules are dressed with the long side outward.

In each next row, you need to add 1 white module, but the black modules, on the contrary, should decrease, in the amount of 1. Thus, 5 rows are collected, so that to the 12 row of white modules in the row there are 7 pieces.

In the thirteenth row, you should put on 8 white modules and 16 black ones, unfolding them with the short side outwards. In the next row, the modules must again be worn with the long side outward. On two central white corners of the previous row, you need to wear a black module, which will be the beak of a hare, on each side of it is put on 4 white, and ends with a series of black modules. To assemble the fifteenth row, the white modules of the previous row and the central black are put on the short side of the outer 8 white modules. The remaining modules( 16 black) should be worn short side inside.

To assemble the sixteenth row, on two central white corners, put the 1 black module with the long side outward, on the sides of it - 4 white modules with the short side outward. The series ends with black modules, with a long side facing outward.

In the eighteenth row on two central corners put 1 black module with the long side outward. On both sides of it there are 1 black module and 4 white ones. The series again ends with black modules.

Ear

Ear of the hogweed consists of 3 rows, 1 consists of 6 black modules, collected by the short side outwards.

2 series consists of 3 white and 1 black modules. Here it is necessary to leave the 1 end corner free and put on the short side outward the necessary quantity of the module.3 row consists of 4 modules, dresses with a short side outward

Wings

A wise owl has, of course, two wings. In order to make one wing, you need 3 black modules and 2 white ones, they must be inserted one after the other. Get the right wing.

The left wing is assembled symmetrically.

A clever owl is before all her eyes, so it's worth cutting out circles of white paper and placing them on the workpiece.

So, our product is ready. Be sure to watch the video lessons below.