womensecr.com

How to make a bracelet of beads with your own hands: video for beginners

  • How to make a bracelet of beads with your own hands: video for beginners

    How to make a bracelet of beads: two different weaving techniques

    Undoubtedly, jewelry made from beads is very beautiful. But the main advantage of this material is that it is very diverse and plastic, and, therefore, the products can be of completely different colors and shapes. In addition, you can make jewelry yourself. On the Internet, you can find a lot of schemes and step-by-step instructions on how to make a bead bracelet for beginners, inexperienced masters, and for beadworker.

    Flower motifs

    This beautiful, romantic bead bracelet, however, is tricked out quite simply. Suits a bright summer image, decorating the hand of a fashionista.

    Materials:

    • beads;
    • bicones or faceted beads by 4 mm and 6 mm;
    • fishing line;
    • large 15 mm bead for fasteners or ready-made fasteners.

    How to make a bracelet of beads and fishing line? Let's try to answer this question.

    Plait bracelet in two strands. If you decide to make a buckle with your own hands, we start with the fact that we put on the bead at the very beginning of work, as in the diagram. If you use a ready-made fastener, the fishing line should be fastened in its center.

    Create a pattern. String on each thread 5 beads and beads by 6 mm, cross the threads in the next bead by 4 mm.

    We continue the series, threading a bead 6 mm, 1 bead, and another bead on each thread, crossing the ends in a small bead.

    So weave the bracelet to the desired length.

    At the end we fasten the second part of the fastener or make a loop of beads that will fit the bead on the other end.

    At the end we braid the flowers of our bracelet. For this, the line will go in the opposite direction. Make sure that it comes out of the last bead, string 11-12 beads and let's pass through the bead between the flowers. We finish the series on both sides, and the bracelet is ready! Enjoy!

    Necklace

    For sure, mastering the technique of weaving with beads, you thought about how to make a bracelet with a name from beads. This can be done in two techniques. Traditional weaving and bead weaving. The last technique we will use to create a personal decoration - a bracelet.

    We will not focus much on how to make a loom. There are a lot of options, you can find detailed descriptions on the web, up to the video. The lesson used a simple version of the machine - a box of tea.

    For work we will need:

    • beads of two colors;
    • thread( mulina or iris);
    • machine;
    • needle.

    Warning! To make such a bracelet, you should use a special beading machine. You can easily do it yourself by watching the video instruction that is shown below:

    Before starting to work, you need to draw a diagram of the future bracelet. This is necessary in order to clearly identify the placement of beads of different colors, from which the letters will be added. In order for the letters to be well read, make the bracelet on a wide scheme, at least 7-9 rows. Please note that there must be an odd number of rows. You can create a diagram using a standard sheet of paper in a cell, painting the cell cells so that a picture is drawn from them.

    First you need to pull on the machine thread. In our bracelet there will be 7 rows of beads, and threads need 1 more. So, pull 8 threads on the machine, not cutting, but simply wrap our box with a mulino. To ensure that the threads do not move, we fix them with adhesive tape from below.

    Next, in the needle, we insert the usual sewing thread of the same shade as the warp threads stretched over the machine. It will be a working thread( otherwise - a duck thread).We tie the thread, the tail, so as not to be confused, you can fix it with adhesive tape.

    We put on the needle 7 beads. Needle with beads pass under the warp threads. With the forefinger we put the beads between the threads. This series is the most painstaking.

    Next, pass the needle already above the warp threads. Pay attention to all they were under the needle and pull out the thread of the duck.

    Again you need to thread on the needle 7 beads, thread under the warp threads. Beads push between the threads, pass the needle. So we work to the desired length of the bracelet.

    Completing the work, unglue the scotch, cut the threads under the box, braid the pigtails, tailoring the bracelet tie.

    If there were any incomprehensible moments in the process of m, you can explain them by watching the video lesson on beadwork.

    So you learned how to make a beaded bracelet with your own hands in two different techniques. Try what you like more. Good luck!

    Undoubtedly, jewelry made from beads, are very beautiful. But the main advantage of this material is that it is very diverse and plastic, and, therefore, the products can be of completely different colors and shapes. In addition, you can make jewelry yourself. On the Internet, you can find a lot of schemes and step-by-step instructions on how to make a bead bracelet for beginners, inexperienced masters, and for beadworker.

    Flower motifs

    This beautiful, romantic beaded bracelet, however, is tricked out quite simply. Suits a bright summer image, decorating the hand of a fashionista.

    Materials:

    • beads;
    • bicones or faceted beads by 4 mm and 6 mm;
    • fishing line;
    • large 15 mm bead for fasteners or ready-made fasteners.

    How to make a bracelet of beads and fishing line? Let's try to answer this question.

    Plait bracelet in two strands. If you decide to make a buckle with your own hands, we start with the fact that we put on the bead at the very beginning of work, as in the diagram. If you use a ready-made fastener, the fishing line should be fastened in its center.

    Create a pattern. String on each thread 5 beads and beads by 6 mm, cross the threads in the next bead by 4 mm.

    We continue the series, threading a bead 6 mm, 1 bead, and another bead on each thread, crossing the ends in a small bead.

    So weave the bracelet to the desired length.

    At the end we attach the second part of the fastener or make a loop of beads that will fit the bead on the other end.

    At the end we braid the flowers of our bracelet. For this, the line will go in the opposite direction. Make sure that it comes out of the last bead, string 11-12 beads and let's pass through the bead between the flowers. We finish the series on both sides, and the bracelet is ready! Enjoy!

    Name bracelet

    For sure, mastering the technique of weaving with beads, you thought about how to make a bracelet with a name from beads. This can be done in two techniques. Traditional weaving and bead weaving. The last technique we will use to create a personal decoration - a bracelet.

    We will not focus much on how to make a loom. There are a lot of options, you can find detailed descriptions on the web, up to the video. The lesson used a simple version of the machine - a box of tea.

    For work we will need:

    • beads of two colors;
    • thread( mulina or iris);
    • machine;
    • needle.

    Warning! To make such a bracelet, you should use a special beading machine. You can easily do it yourself by watching the video instruction that follows:

    Before you get started, you need to draw a diagram of the future bracelet. This is necessary in order to clearly identify the placement of beads of different colors, from which the letters will be added. In order for the letters to be well read, make the bracelet on a wide scheme, at least 7-9 rows. Please note that there must be an odd number of rows. You can create a diagram using a standard sheet of paper in a cell, painting the cell cells so that a picture is drawn from them.

    First you need to pull the machine thread. In our bracelet there will be 7 rows of beads, and threads need 1 more. So, pull 8 threads on the machine, not cutting, but simply wrap our box with a mulino. To ensure that the threads do not move, we fix them with adhesive tape from below.

    Next, in the needle, we insert the usual sewing thread of the same shade as the warp threads stretched over the machine. It will be a working thread( otherwise - a duck thread).We tie the thread, the tail, so as not to be confused, you can fix it with adhesive tape.

    We put on the needle 7 beads. Needle with beads pass under the warp threads. With the forefinger we put the beads between the threads. This series is the most painstaking.

    Next, pass the needle already above the warp threads. Pay attention to all they were under the needle and pull out the thread of the duck.

    Again you need to thread on the needle 7 beads, thread under the warp threads. Beads push between the threads, pass the needle. So we work to the desired length of the bracelet.

    Completing the work, unglue the adhesive tape, cut the threads under the box, braid the pigtails, making the bracelet tie.

    If there were any incomprehensible moments in the process of μ, you can explain them by looking at the video lesson on beadwork.

    So you learned how to make a beaded bracelet with your own hands in two different techniques. Try what you like more. Good luck!