Bow tie: Pattern, 2 sewing and tie-in patterns

Butterfly tie, despite its long history, is a very modern accessory that can be found in both the wardrobe of young people and their advanced girlfriends. Moreover, it is not difficult to sew it, it will bring a lot of positive impressions of creativity, and the result will be a stylish accessory that will suit both the everyday image and a special case. A bow tie, the pattern of which is placed in our article, is tied in a certain way, which will also be noted in the article. Also in the article there is a lesson of sewing a butterfly on an elastic band, however it will not require a special pattern.

Tie with drawstring

So, first of all you will need a pattern.

1. It will take two pieces of fabric( core and for lining), a pattern that we printed and a fastener.

2. Pattern pins pins to the wrong side of the base fabric, circle, not forgetting to add an allowance of 7 mm.

3. Cut the first part.

4. Apply it to the second piece of fabric, circle and cut out the second part.

5. The details, cut from the main fabric, are pinned to the lining.

6. Cut out each.

7. We make a line on both parts. Leave a hole for eversion.

8. Cut the corners so that when you turn the pieces of fabric do not spoil the appearance.

9. We cut the bends.

10. Using a narrow stick, we'll twist the tie.

11. We start with the bottleneck.

12. Holes in the inverted parts are sewn with a hidden seam.

13. We get almost ready-made parts. Although the butterfly we have and samovyaz, but we will also fasten the clasp to it.

14. Put the hook on the tip of one part.

15. Punch it.

16. We attach the regulator to the second part.

17. We pass into the regulator the end of the strap.

18. The end is sewn.

19. The butterfly is ready.

We figured out how to sew a bow tie. The pattern is still useful, because you probably want to sew a few more in such an easy way.

Butterfly with rubber band

The advantages of such a tie model is that you do not need to waste time tying. A butterfly on an elastic band can be worn over the head, so make it on the buckle and close the "lock" in one motion.

For tailoring you will need:

• two pieces of fabric of different colors;
• elastic band 2 cm wide;
• clasp;
• thread, needles;
• scissors;
• iron with steamer.

1. Let's start again with the pattern. This time it will be the usual rectangles with dimensions of 8 by 13 cm, 11.5 by 22 cm, 13 by 23.5 cm. By pins we pin their tissues and cut them out.

2. We get rectangular blanks. We take the largest and add it along.

3. We iron the iron, carefully smooth the bend place.

4. Straighten and fold now across.

5. Again ironing.

6. The flap is folded so that the edge line coincides with the horizontal fold.

7. Iron it again.

8. The same is repeated with the other edge.

9. Without unfolding the workpiece, add the edge to the fold line vertically.

10. Fix position with iron.

11. On the other hand we overlap the fabric overlap.

12. Again we work with an iron.

13. We add the average workpiece in the same way.

14. The last flap is the smallest. Fold it along.

15. Smoothing.

16. Unfold it. Next, fold the edge to the fold line of the fabric and iron.

17. Continue to fold the fabric in the same direction until we get the tape. Every crease of the fabric is ironed.

18. Here are three of these blanks turned out.

19. The middle piece is sewn with a simple seam, slightly pulling it together. We tie a string and cut it off. With big do the same.

20. Sew the edges of the smallest blank tape with any seam, even the simplest intended one will do.

21. Get the ring.

22. Combine the large workpiece and the middle, sew, pull them together in the middle of the ring.

23. We measure the required gum din.

24. Pull it under the fabric ring.

25. We sew the buckle to the elastic band. You can stitch it on the typewriter.

And now the butterfly tie is ready with your own hands. Patterns, as you can see, are only nominal, not requiring complex constructions. Enjoy the creativity and its fruits. Video selection