Origami Animals for Kids: Schemes and MKs with a video tutorial
Origami animals: master class with photo and video lesson
This article presents many origami schemes. Do it with the children, this is a very fascinating activity, especially when making crafts in origami technique, not only the imagination develops, but also the fine motor skills of the hands. To make animal origami patterns are shown below.
The main thing is to be attentive and to view the circuit well.
Shark
To make it clear, here are the video lessons:
Dolphin
And the traditional selection of lessons:
Cancer
And here's the podborochka MK:
Seal
How to make:
Penguin
This was a scheme, and how to make such a penguin, see below:
Shrimp
Such a charming shrimp can be very easily done with this instruction:
Rabbit
Schematic:
And here is a very detailed video tutorial:
And such a festive version:
Elephant
Eleonik assembly schema:
attention to a detailed teaching lesson on the creation of such an elephant of paper.
To make modular origami, you need perseverance, but the result will definitely please. For example, you can make a three-dimensional goat. We remind you that the topic of our article is how to make origami animals for children.
Bulk goat
What is needed
- 229 white triangular modules( size 1/32), 5( size 1/8);
- 10 - brown( the size of 1/32).
Description of the work
For the body 206 white and 4 brown. Arrange the 4 modules as follows:
Assemble the workpiece.
In total, 10 pieces are needed for these blanks, now you need to connect them as follows: To do this, insert 9 modules on each side.
Attach 1 module from the sides( red on the photo), fix each two modules( green in the photo).
Assemble in a circle 1 row( 22 modules).
Another series.
Leave on one side a place for the head. Leave the 2 corners free and collect the 21 modules in a circle.
The next row of 20 modules.
Next of 19.
Feet.
Wear first 3 modules, in the next row 2 and 1 module in the last.
Then again put on 2 modules, then 1.
At the end, insert 1 brown.
Symmetrically it is necessary to assemble the second front leg.
In the same way do the hind legs, and between them make a tail of 2 modules.
The head is made of 5 modules of white color( size 1/16 А4).On the long side put 2 modules and 3 on a short.
First you need to connect 4 modules to 2.
And fix the fifth one.
How to put the workpiece on the photo.
The beard, which consists of a module, 1/32 in size, placed under a spout.
Insert between the two modules.
Glue the corners.
Glued on the reverse side.
Put on the upper corners of the horns, which consist of brown 1/64 modules.
Draw a spout and eyes.
You can remove 1 piece between the legs to make the barrel thinner.
The goat is ready. For a more detailed look at creating a horned animal in this technique, see the video below.
This article presents many origami schemes. Do it with the children, this is a very fascinating activity, especially when making crafts in origami technique, not only the imagination develops, but also the fine motor skills of the hands. To make animal origami patterns are shown below.
The main thing to be attentive and to view well the circuit.
Shark
To make it clear, here are the video lessons:
Dolphin
And the traditional selection of lessons:
Cancer
And here's the MK pod:
Seal
How to make:
Penguin
This was the scheme, and how to make such a penguin look below:
Shrimp
Such a charming shrimp can be very easily done with this instruction:
Rabbit
Schematic:
And here is a very detailed video tutorial:
And such a festive version:
Elephant
Elephant assembly diagram:
We bring to your attention a detailed tutorial on creating such an elephant frompaper.
To make a modular origami, you need perseverance, but the result will definitely please. For example, you can make a three-dimensional goat. We remind you that the topic of our article is how to make origami animals for children.
Bulk goat
What is needed for
- 229 white triangular modules( size 1/32), 5( size 1/8);
- 10 - brown( size 1/32).
Description of the work
For the body 206 white and 4 brown. Arrange the 4 modules as follows:
Assemble the workpiece.
In total, 10 pieces are needed for these blanks, now you need to connect them as follows: To do this, insert 9 modules on each side.
Attach 1 module from the sides( red in the photo), fix each two modules( green in the photo).
Assemble in a circle 1 row( 22 modules).
Another series.
Leave on one side a place for the head. Leave the 2 corners free and collect the 21 modules in a circle.
The next series of 20 modules.
Next of 19.
Feet.
Wear first 3 modules, in the next row 2 and 1 module in the last.
Then again put on 2 modules, then 1.
At the end, insert 1 brown.
Symmetrically it is necessary to assemble the second front leg.
In the same way do the hind legs, and between them make a tail of 2 modules.
The head is made of 5 modules of white color( size 1/16 А4).On the long side put 2 modules and 3 on a short.
First you need to connect 4 modules to 2.
And fix the fifth one.
How to put the workpiece on the photo.
The beard, which consists of a module, 1/32 in size, placed under a spout.
Insert between the two modules.
Gluing the corners.
Glued on the reverse side.
Put on the upper corners of the horns, which consist of brown 1/64 modules.
Draw a spout and eyes.
You can remove 1 piece between the legs so that the barrel is thinner.
The goat is ready. For a more detailed look at creating a horned animal in this technique, see the video below.