How to sew bed linen yourself for a newborn, in a crib and for adults

Many housewives ask the question: how to sew the bed linen yourself? But this is not difficult at all. Therefore this master class is devoted to this topic.

For Adults

Dimensions

Duvet cover 140 x 210 cm

Sheets 150 to 215 cm

Pillowcases 50 to 70.

What you need

Fabric: 5.3 m. With a width of 2.2 m.

Pattern:

Cross-stitch beddingown hands has many advantages. Not only will it significantly save the budget, it also has high strength.

Detailed description

Cut into pillowcases from 100 cm length. The remainder is a shaded part that needs to be cut off. Bend lines are dotted lines. Cut in half a line on the pillowcase. Then cut off the fabric for the sheet from the duvet cover.

You can start with any details. For example: with a duvet cover.

Add on the dotted line along the din. Stitch the upper and the long side seam as in the picture: wrap 2 times and stitch, so it is safer and you do not need to process the slice.

Make the bottom of the duvet cover unshielded. Detach it along the edge from the front side and make the bows at the edges. This hole is for putting a blanket in the duvet cover. The width is arbitrary, you can make a hole 50 cm, and you can sew a lock to the full width of the duvet cover. Duvet cover is ready.

Pillowcases. Measure 70 cm, turn them face to face, and all that is left, turn up.

Cut the slice in the same way as on the quilt, and stitch it.

Rear view:

Pillowcases are ready.

The simplest part is the sheet. Twist the slices and stitch them.

That's all.

For a newborn

To learn how to sew bed linens for a newborn, we look at the master class given below.

For such a set, coarse calico is best.

Size of the set

Sheet 140 × 110 cm( + 3 cm for the allowances), quilt cover 105 × 105 cm, length 2.13 m, width 1.08 m( with allowances of 1.5 cm), pillowcase 70 ×50 cm. For the pillow case you need 2 parts: 1 - 98 × 53 cm, 2 - 73 × 53 cm.( + 1,5 cm for allowances).

. Fabrics need 4.5 m.

You need to sew the laundry with a margin, soAs the fabric shrinks about 10%.

You can pre-treat the fabric with hot steam or water so that in the future it does not sit down.

Detailed description

Sheets:

Pillowcase:

Duvet cover:

For children in the crib

This master class will tell you how to sew baby bedding into a crib.

What is needed for

For bedding sizes of 120 × 60 cm, a cloth measuring 1.5 m × 3 m is needed.

Below is a pattern for a more economical cutting of the fabric.

Below is a description of how to properly sew baby bedding with your own hands.

Detailed description

Sheets:

Fold up to 5 mm.edge and again in the same direction to bend by 5 mm. Sweep by hand.

Stitch on the typewriter.

The sheet is ready.

Pillowcase:

Treat the seams as on the sheets.

Fold the fabric inward with the front side of the fold line. The end of the valve should be bent so that it is on the other side.

Sew on the machine, turn it all out, the pillowcase is ready.

Duvet Cover:

Edit the edges. Fold inward with the front side along the fold line. A rectangle measuring 95 × 100 cm will be obtained. Side panel and top are stitched.

To divide the bottom of the duvet cover into 3 parts: 42 /20/ 42 cm. To sew the bottom on 40 cm on both sides, and 20 cm in the center to leave it not sewn. Make bows at the end of the seams.

Here's a children's kit ready.

A selection of training videos