Tracks from plastic bottles with their own hands: original ideas for giving

The junk material gives inexhaustible possibilities for realization of creative ideas of a person. Not always to do anything unusual, you will need to go to the store and spend money on materials for crafts. Or go to the forest for collecting natural raw materials. What we want to offer you, is under your feet in the most direct sense of the word. These are ordinary plastic bottles. And we show you how to make tracks from plastic bottles with your own hands.

The photo shows the simplest version of such a track.

The garden path is quite simple to manufacture, and you can safely connect the children to the process. Such an occupation will help them respect the things and appreciate every little thing, as well as develop creative imagination and imagination.

To make it, collect a sufficient number of bottles. Then cut off the bottom.

The place where the garden path will be filled with sand, which is leveled and moistened. Then the bottoms of bottles are pressed into the sand. If you are lucky to collect bottles of different colors, you can put a multicolored pattern, so it will be more fun to look. If in the intervals between the bottles you lay out the covers - you will get a more solid and single panel.

Now on our path we put boards and it is good for them to be drowned, so that it is possible to tamper with it as best as possible. This task will be performed with special pleasure by children. Everything, the track is ready. Now your territory is special and unique. Envy of neighbors and passers-by is guaranteed.

On the Internet you can also find a master class on laying tracks from bottoms in video format.

But there is one more thing related to a plastic bottle that has served its time, but worthy to continue life as a garden path decoration. It's about lids. The tracks from the plastic bottle caps look very nice, because the caps have bright colors and can be laid out in the form of a pattern, using, for example, a pattern for cross stitching.

In short, we'll tell you how the cork paths are made from plastic bottles for the garden.

Wash the collected plugs thoroughly and dry them.

Decide on the place where your future track will take place and make a markup. To do this, enough often beat the pegs along its border. Pull the rope around the pegs. Carefully measure the width of the track. If the track is intended only to walk on it, then 50 cm will be enough. If on it you will drive a wheelbarrow, or use it for any other household needs, in this case the width of the track must be at least 80 cm.

The marked territory must be carefully cleaned of debris.

Dig a shallow trench and tamper with the soil in it.

At this point you can put the fence along the path. Either from plastic bottles dug into the soil with the neck down, or from other materials at hand.

Trench with cement and level it well.

Now it's time to spread the corks. Pressing them into the cement, as shown in the photo, spread out the conceived drawing.

This is the basic principle of laying a garden path out of cork from plastic bottles. As you can see, there is nothing complicated, but the result is worthy of admiration.

Taking into account the fact that nobody in our country is engaged in the processing of used plastic, you are contributing to the conservation of nature. In addition, create things that decorate the interior and pleasing the eye. As they say, combine business with pleasure.

Be sure to check out this video: