womensecr.com

Doll on the kettle with your own hands: master class how to sew a warmer doll

  • Doll on the kettle with your own hands: master class how to sew a warmer doll

    Doll on the teapot with your own hands: master class for example dolls of tilde, dolls from nylon and cockerel

    All have ever seen cute pupae that cover their teapots with their magnificent skirts, thus helping them to keep warm longer. This doll is usually sewn on the folk motif - a sort of Russian lady. In this article we will remind you how a doll is sewn on a teapot with his own hands, the master will classically examine each stage of the work.

    A doll for a kettle can be completely different. It can be sewn from simple fabric, from a nylon, connected, to have the appearance of an animal.

    We make a doll of a tilde on a teapot

    We need the following materials for making a doll:

    • Fabric( linen, calico, cotton, fleece)
    • Insulation and filler( sintepon, holofayer)
    • Felting or felting yarn
    • Accessories and decoration materials( buttons,lace, ribbons)
    • Sewing accessories
    • Sewing machine
    • Scissors

    1. In order for us to get a warmer doll for a teapot, we use the following patterns:

    Before making a pattern, you need to measure the kettle and slightly increaseDimensions.

    2. Take the flax and cut out the two torsos on the first pattern, leaving 1 cm of allowance for the seams. We connect the details of the front side and sew on the contour except the bottom. Where the bends - cut and straightened, and then turn the workpiece on the front side.

    3. We stuff the head and the handle of the doll to the armpits, after which we sew the doll, so that the filler does not fall out( do not tighten the thread tightly).

    4. We take coarse calico and using the second pattern of cuts 2 details of the lining. It is necessary to make the allowances on the sides of 7 mm, and from the bottom about 1.5 cm. The same details are cut from the sintepon( the allowances are left on each side).Calico and sintepon are folded and stitched, while leaving a hole about 8-10 cm to turn the product out.

    5. After that, the two blanks are sewn( from linen and from calico with a sintepon) at the bottom in a circle. Through the hole that we left earlier, everything turns out on the front side. The hole itself can be sewn by hand.

    6. The layer of the heating pad fits into the trunk. Inside, you need to fix them with a few stitches, so that the hot-water bottle does not fall out.

    7. Begin to dress the doll. Slightly below the middle of the doll, a bright cotton lining is sewn( when sewing to make wrinkles for splendor)

    8. Cream on fleece for a pattern of dress and collar.

    9. On the doll's face we draw eyes( embroider), we paint our cheeks. With the help of wool, we make hair that we put into our hair.

    10. We put on the doll in the dress and start decorating it. For this we sew an apron, using a button and a bow to attach it. On the edge of the dress is decorated with braid and ribbon.

    Our wonderful young lady is ready!

    Doll from a nylon on a teapot

    A beautiful doll with a heating pad can also be made from pantyhose. We suggest that you familiarize yourself with the svideo lesson, with which you will learn how to sew a warmer doll using kapron tights.

    For work you will need to prepare some materials:

    • Wire for frame
    • Nylon tights
    • Yarn
    • Cloth
    • Lens
    • Accessories( eyes, cilia, buttons)
    • Flowers
    • Sewing accessories( threads, needle)
    • Glue
    • Colored pencils or cosmetics

    Doll cockerel on teapot

    Dolls can have a kind of a kind of animal and the kind of animals, as we mentioned earlier, so we will tell you how to make a doll on the teapot with your hands in the form of a cockerel. To sew it, you will need the following materials:

    • Cloth
    • Buttons, ribbons, braid
    • Filler, insulation
    • Threads, needle
    • Sewing machine

    First of all, you need to prepare a pattern, taking into account that each cell in the figure has a size of 5 *5 cm

    The pattern details are prepared in the following quantity:

    Body - 6, head - 2, scallop - 2, beak - 2, chin - 4, winglet - 4, tail-2.

    They are cut out on a color or monophonic fabric, which will be the outer "plumage" of the cockerel, but apart from it you need to cut out identical parts from the lining fabric( batting, foam rubber, sintepon, flannel, bike).All this is sewn together according to the scheme.

    The eyes of the cockerel are made of buttons, or, for example, pieces of dense fabric( drape, fleece) and are sewn to the head of the cockerel, which in turn are sewn( according to the scheme) and beak, and beard, and scallop, after which it stitches with the trunk.

    The body of the cockerel is decorated with ribbons, buttons, lace and so on, according to your idea, and in the end we get a wonderful cockerel:

    We wish you creative success!

    Everyone has seen cute dolls that cover their teapots with their magnificent skirts, helping them to keep warm for longer. This doll is usually sewn on the folk motif - a sort of Russian lady. In this article we will remind you how a doll is sewn on a teapot with his own hands, the master will classically examine each stage of the work.

    A doll for a kettle can be completely different. It can be sewn from simple fabric, from a nylon, connected, to have the appearance of an animal.

    We make a tilde doll for a teapot

    We need the following materials for making a doll:

    • Fabric( flax, calico, cotton, fleece)
    • Insulation and filler( sintepon, holofayer)
    • Felting or felting yarn
    • Accessories and decoration materials( buttons,lace, ribbons)
    • Sewing accessories
    • Sewing machine
    • Scissors

    1. In order for us to get a warmer doll on the kettle, we use the following patterns:

    Before making a pattern, you need to measure the kettle and slightly increaseDimensions.

    2. Take the flax and cut out the two torsos on the first pattern, leaving 1 cm of allowance for the seams. We connect the details of the front side and sew on the contour except the bottom. Where the bends - cut and straightened, and then turn the workpiece on the front side.

    3. We stuff the head and the handle of the doll to the armpits, after which we sew the doll, so that the filler does not fall out( do not tighten the thread tightly).

    4. We take coarse calico and with the help of the second pattern of cuts 2 details of the lining. It is necessary to make the allowances on the sides of 7 mm, and from the bottom about 1.5 cm. The same details are cut from the sintepon( the allowances are left on each side).Calico and sintepon are folded and stitched, while leaving a hole about 8-10 cm to turn the product out.

    5. After that, the two blanks are sewn( from flax and from calico with a sintepon) at the bottom in a circle. Through the hole that we left earlier, everything turns out on the front side. The hole itself can be sewn by hand.

    6. The layer of the heating pad fits into the trunk. Inside, you need to fix them with a few stitches, so that the hot-water bottle does not fall out.

    7. Begin to dress the doll. A little below the middle of the doll, a bright cotton lint is sewn( when sewing to make folds for splendor)

    8. Cream on a fleece pattern on the dress and collar.

    9. On the doll's face we draw the eyes( embroider), we paint the cheeks. With the help of wool, we make hair that we put into our hair.

    10. We put on the doll in the dress and start decorating it. For this we sew an apron, using a button and a bow to attach it. On the edge of the dress is decorated with braid and ribbon.

    Our wonderful young lady is ready!

    A doll made of nylon on a teapot

    A beautiful doll warmer can also be made from pantyhose. We suggest that you familiarize yourself with the svideo lesson, with which you will learn how to sew a warmer doll using kapron tights.

    For work you will need to prepare some materials:

    • Wire for frame
    • Kapron tights
    • Yarn
    • Fabric
    • Lena
    • Accessories( eyes, cilia, buttons)
    • Flowers
    • Sewing accessories( threads, needle)
    • Glue
    • Colored pencils or cosmetics

    Doll cockerel on the teapot

    The dolls of a hot-water bottle can have a kind of animal, as we mentioned earlier, so we will tell you how to make a doll on the teapot with your own hands in the form of a cockerel. To sew it, you will need the following materials:

    • Cloth
    • Buttons, ribbons, braid
    • Filler, insulation
    • Threads, needle
    • Sewing machine

    First of all, you need to prepare a pattern, taking into account that each cell in the figure has a size of 5 *5 cm

    The pattern details are prepared in the following quantity:

    Body - 6, head - 2, scallop - 2, beak - 2, chin - 4, winglet - 4, tail-2.

    They are cut out on a colored or monophonic fabric, which will be the outer "plumage" of the cockerel, but apart from it you need to cut out identical parts from the lining fabric( batting, foam rubber, sintepon, flannel, bike).All this is sewn together according to the scheme.

    The eyes of the cockerel are made of buttons, or, for example, pieces of dense fabric( drapes, fleece) and are sewn to the head of the cockerel, which in turn is sewn( according to the scheme) and beak, and beard, and scallop, after which it is sewn to the trunk.

    The body of the cockerel is decorated with ribbons, buttons, lace and so on, according to your idea, and in the end we get a wonderful cockerel:

    We wish you creative success!