2 ways to make 3D glasses at home by yourself

To date, an increasing number of films and cartoons are produced in 3d format, so that viewers can enjoy a three-dimensional image and a 3D image, they are given a special red-blue anaglyph 3d glasses. The illusion of the three-dimensionality of the image is created by color coding, that is, instead of conventional lenses, such glasses have special filters, for the left eye a red filter is used, for the right one - blue. In order to make such glasses yourself, you do not need any special skills or expensive materials. In this article, two master classes will be presented, in which step by step will be described how to make 3d glasses at home using a cardboard frame and old glasses.

In these videos, the masters share the secrets of creating 3d glasses. It will be shown how to make such spectacles at home and from materials at hand to view large images.

1 way: from a cardboard rim

The first variant of manufacturing such glasses assumes use of a cardboard frame. In order to carry out 3d glasses with your own hands, you will need to purchase the following materials: a sheet of cardboard, a pencil, scissors, a thick transparent silicone or transparent film, a wide transparent adhesive tape and three color markers, namely blue, green, red.

First of all, on a sheet of cardboard with a simple pencil you need to draw out the contours of the rim and the douche points. Then you have to bend the cardboard sheet in half and cut it with scissors, the form of glasses without lenses in two copies. Then from a transparent film it is necessary to cut out two identical on the size a square. Next, one square should be painted on one side with a blue marker, on the other hand - a green marker. The second prepared square should be painted on both sides with a red marker. Then both painted squares must be pasted with adhesive tape on both sides, but in such a way that no small air bubbles remain, otherwise the image quality will be poor. At the final stage, the prepared squares must be glued to the cardboard form of the glasses, the second cardboard form must be glued on top.

2 way: from old

glasses Also at home you can make 3d glasses according to the second option, namely: using old glasses. To work will need unnecessary glasses, transparent dense film, red and blue markers, scissors.

First you need to prepare glasses, take out the usual lenses. According to the shape of old lenses from a dense transparent film, two pieces of the same shape must be cut out. Then one part should be painted with a red marker, another part should be painted with a blue marker. It is important to evenly paint the parts with a marker, make sure that no strips or streaks form. After the parts have been painted, you need to wait a little while the paint dries. Next, you need to carefully insert the prepared colored parts instead of lenses, the red part should be inserted in place of the left lens, and the blue part - instead of the right lens. After that, 3d glasses can be considered ready, and you can start watching movies or cartoons in 3D.But do not forget that viewing images in these glasses has a strong eye strain, adapting to such points will take about thirty seconds, and after removing the glasses it takes, as a rule, some time to restore the light perception.