womensecr.com

Molding from polymer clay: a master class, video lessons for beginners

  • Molding from polymer clay: a master class, video lessons for beginners

    Molding from polymer clay: a master class for beginners with video lessons

    Lessons of molding from polymer clay are designed to tell needlewomen about the basic properties of polymer clay, to acquaint with techniques and technologies for working with this material, to clarify the main points onwhich must be paid attention in the process of work. On the Internet, you can find a huge amount of video "modeling of polymer clay", which is shown with all the necessary details for work. For example, needlewomen can pay attention to such a video.

    Master class on working with polymer clay

    Molding from polymer clay: the master class for work with which will be given below, the occupation is painstaking, but the result is worth it.

    In order to produce what is shown in the picture, you will need clay, paints and brushes, a knife, a plate with a rolling pin, wire, molds for cutting, glue, mold for petals. Mold is a device for creating flower petals, it is used in ceramic floristics.

    Step-by-step instruction:

    On the plate using a rolling pin, roll out a little clay so that a small protrusion in the center turns out.

    With the aid of a mold, it is necessary to cut out the core for the future flower from the rolled sheet. In the absence of a mold, you can draw a contour of the core yourself and then cut it with a knife.

    Next, you should form the core, for this you need to bend inward all the parts of the core.

    Then, apply a glue at a 90 degree angle, and then attach the core, then you need to mold the clay from the clay and place it inside the core, it is desirable to color the core in yellow for realism.

    The next stage is the making of petals, again a piece of clay is rolled out with a small ledge, and then it must be put on the mold, press and remove the clay remnants, and four more petals are likewise formed.

    After that, a couple of drops of paint should be applied to each petal.

    At the final stage, collect all the petals, and then insert the wire with the core and your flower is ready.

    Thus, courses on working with polymer clay, as a rule, are presented in an understandable form. Molding from polymer clay for beginner needlewomen can seem at first a rather difficult task, but if you carefully look at the master class and become acquainted with the courses, the modeling process will become interesting and fascinating.

    Lessons of molding from polymer clay are designed to tell needlewomen about the basic properties of polymer clay, to familiarize with techniques and technologies for working with this material, to clarify the main points that need to be paid attention in the course of work. On the Internet, you can find a huge amount of video "modeling of polymer clay", which is shown with all the necessary details for work. For example, needlewomen can pay attention to such a video.

    Master class for working with polymer clay

    Modeling from polymer clay: a master class on work, which will be shown below, is a painstaking tutorial, but the result is worth it.

    In order to produce what is shown in the picture, you will need clay, paints and brushes, a knife, a plate with a rolling pin, wire, molds for cutting, glue, mold for petals. Mold is a device for creating flower petals, it is used in ceramic floristics.

    Step-by-step instruction:

    On the board with a rolling pin, roll a little clay so that a small protrusion in the center is obtained.

    With the aid of a mold, it is necessary to cut out the core for the future flower from the rolled sheet. In the absence of a mold, you can draw a contour of the core yourself and then cut it with a knife.

    Next, you need to form a core, for this you have to bend inwards all parts of the core.

    Then, apply a glue at a 90 degree angle to the wire and then attach the core, then you need to mold the clay from the clay and place it inside the core, it is desirable to color the core in yellow for realism.

    The next step is the making of petals, again a piece of clay is rolled out with a small ledge, and then it must be put on the mold, press and remove the clay remnants, and four more petals are likewise formed.

    After that, on each petal you need to apply a couple of drops of paint.

    At the final stage, collect all the petals, and then insert the wire with the core and your flower is ready.

    Thus, courses on working with polymer clay, as a rule, are presented in an understandable form. Molding from polymer clay for beginner needlewomen can seem at first a rather difficult task, but if you carefully look at the master class and become acquainted with the courses, the modeling process will become interesting and fascinating.