How to make a rose from paper by yourself: detailed instructions for beginners

You can decorate anything with paper colors: postcards, a wall, gift wrapping and much more. One of the most popular colors is a rose. This article will discuss in detail different options for how to make a rose from paper with your own hands.

The fastest way to

Below is a description of how easy and simple it is possible to make such crafts.

You will need:

• Heavy paper of red color in the form of squares, size 10x10 cm.
• Scissors, glue.

Take a piece of paper and draw a labyrinth on it with a pencil.

Take the scissors and cut out the drawn spiral, do it as accurately and accurately as possible.

Starting from the outer end of the paper blank, begin to twist the workpiece.

In the same way, twist all the paper, and paste the tip to the bottom of the rose.

That's it, the product is ready.

The second way of manufacturing

To produce such a flower you will need thick paper, glue and scissors.

Take a sheet of A4 paper and fold it in half, and then again.

Expand the sheet and cut it into four pieces along the fold lines.

Fix all the strips together with adhesive tape so that one long strip is produced.

If the strip is successful, then you need to twist it until it runs out.

Straighten the petals, the rose is ready.

The third way - from corrugated paper

The rose can be made not only from ordinary paper, but also from corrugated paper. For such a flower you will need a corrugated paper of two colors, pink and green. Also a wand, scissors, a pencil and glue for floristry. Let's consider this method of creating a paper rose step by step.

First, make a pattern of thick paper in the form of an elongated heart 15 cm high.

Cut out 5 to 6 hearts from pink paper using a template.

Take the wand and wrap it with floral tape or green paper.

Now proceed to the petals. Take the heart and gently stretch it in width. And then wrap the upper edge of the heart on the handle.

Finish the petal around the wand and fasten it with tape.

Do the same with the other petals.

Prepare leaflets in advance. And wrap the wire with green paper and attach the leaves to it.

Now make a cup for the rose, also made from green paper.

You can fix it with glue or tape. Next, take the leaves and fasten them on the branch, forming one trunk with corrugated paper.

Everything, your rose is ready.

The fourth option( in the origami technique)

Very impressive roses made in the origami technique, making them is not so difficult, especially if there is a detailed instruction or diagram.

Take the two-sided colored paper and cut out the square from it. Bend horizontally, vertically and diagonally, then expand it.

Fold the sheet horizontally, but already to the center, carefully look at the photo. Do this four times. Now bend the edge of the sheet in half, but with respect to the small bottom. Repeat three more times on each side. On the sheet should turn out the same bends, as in the picture.

Fold the paper from both sides to the center along the folds. After that, the fold obtained in the corner is folded diagonally. Repeat four more times and get the workpiece, as in figure 13. Its corners need to be folded to the right.

Now the edge of the petal needs to be carefully bent away from the center upwards. Do the same with the other sides. Such an action will provide a rose volume.

Bend all the corners to the center of the square, and then straighten again.

Now you need to hide the sharp corners between the forthcoming folds, do it four times. You should get a large rose.

In the places where the corners were connected, gently straighten the petal. One side of it is bent to the center, and the other is flat. The rose acquires volume.

The outer edges of the flower bend in half.

Everything, the product is ready.

Here is a detailed outline of how to make a paper origami rose:

If you do not understand the above-described master class very well, then below there is a video in Russian about how to make such roses, as well as ordinary video, without explanation.