How to make a module for origami: step-by-step instructions and mastering techniques using the swan

If you seriously decided to study the eastern way of making all kinds of paper figures in modular technology, then first of all you need to understand how to make an origami module whose circuit is very simple.

The art of making models from paper without scissors and glue came to us from Japan. Presumably, the origin of this type of needlework was the Ancient China, where paper appeared for the first time. Like all Oriental, origami carries a smoothness of lines and is used as a way for relaxation.

Following the diagram, try to do the work very carefully and carefully. Consider the fact that the modules are like bricks, from which a masterpiece is composed.

Getting started

So, for work we need an A4 sheet.

We divide the entire sheet into equal rectangles:

After cutting, take one rectangle and add it in half:

This halve is folded again in half:

This is needed to mark the middle of the leaf to fold the edges in the form of a triangle:

Now the edges of the workpiece must be bent to the previously plannedmiddle, so that this triangle turned out:

Turn the workpiece and again bend the edges to the middle. Try to leave a small distance between the big and two small triangles:

Now we need to bend the lower triangles up:

We have got an even triangle, which we need to bend again in half:

Our module is ready.

The finished element has two corners and a pocket, which are used to connect the modules to each other.

The connection looks like this:

Also, for clarity, how to make a triangular module for origami video is simply necessary: ​​

Mastering the technique of "modular figures" using the example of the swan

So, we have already successfully figured out how to make a triangular module for origami. Now let's try to make simple figures using this technique. Our first creation will be a swan:

It is very simple and on its example you can disassemble the process of connecting elements.

The entire process of creating a swan is described in the diagram:

The first step is the nesting of 4 white modules into each other.

Make sure that the long ends are turned to the left. Then place one module with the double end to the bottom and attach the remaining 4 modules. The tail of the future swan turned out.

To get the wings, you need to insert the opened module on each side into the base of the figure( 4 large modules).

For the neck we need 9 smaller modules. They are formed in a manner similar to the swan body - each other. Note that the dual end of the module must be at the bottom.

Now from the red module we make the bird's beak, inserting it with a double end into the end of the neck, i.e. the long base should be on the bottom. We connect the neck and trunk. And our swan is ready. This was the easiest way to create a modular origami.

If you easily coped with this task, then you are ready to move on to more complex models of modular origami. You can make a cat, a vase and even a whole fruit basket.

The process of creating modular origami is a very exciting process, which quickly drags headlong. But it requires the utmost concentration and attention that is typical of oriental art. So take your time and be patient with the process of creating the next masterpiece.

Training videos for beginners