Pattern of a coat with a raglan sleeve for women

Leading designers demonstrate in their fashion collections a coat with a raglan sleeve. And all because this type of sleeve best conceals the shortcomings of the figure, thanks to a good cut. For example, depending on the slope, at the expense of such a sleeve, you can either expand the shoulder line, or, if necessary, reduce it.

The correct pattern of a coat with a raglan sleeve will help needlewomen sew such a thing.

The design of the sleeves of raglan

The idea of ​​creating this type of sleeve belongs to the British, in order not to feel any discomfort in case of wetting the seams in rainy weather, the sleeve was decided to be inclined. A distinctive feature of the sleeve of raglan is that this sleeve with a closed shoulder part along the entire length and a separated shoulder seam, ie, the sleeve is formed from the neck without unnecessary protrusions.

The classic raglan sleeve is cut off as a separate part from the back and shelf of the product. The hose should be located from the shoulder line to the neck line, ie the sleeve with the shoulder represent a single whole.

In order for the sleeve to be properly built, the mid-shoulder line should be shifted a little forward, on the shelf of the product, about a centimeter apart, and lift the neckline of the backrest by half a centimeter. After that, close the darts on the shelf and back, and then draw a line of pellet. Next, you need to combine the cut-off parts from the shelf and the back and draw the contours of the sleeve of the raglan, thereby the center of the sleeve shifts, and the line of the sleeve is extended. How to carve a raglan sleeve, shown in the photo.

How to sew a pattern of a coat with a raglan sleeve

The pattern of a coat, the sleeve of a raglan in whose model it acts as the main decoration, will help the needleworkers sew a wonderful thing that will occupy a worthy place in the wardrobe and will not lose its relevance for several fashionable seasons.

Focusing on patterns, you can sew a straight silhouette coat with a raglan sleeve, the model can also be narrowed to the bottom, and have a double-breasted fastener.

To sew a coat follows, being guided by patterns, but some spare parts of a cut require special attention. In the process of sewing a coat, the shoulder cut on the back should be raised one centimeter upward, and the side cut of the backrest should be extended to the bottom of the sleeve. From the side of the side cut the back should be narrowed, starting from the hip line. The lateral section of the shelf with the lower cut must be similar to the side cut of the back. On the shelf, the shoulder section should be lowered by one centimeter.

Also looks great model of a coat with a sleeve of raglan not narrowed to the bottom, but, on the contrary, flared.

You can sew such a pattern according to the patterns with the refinement of some details. Raise the shoulder of the backrest by one and a half centimeters to cut the shoulder cut, and the edge of the floor should, on the contrary, be lowered by a similar amount. The line of the sleeves of raglan is planned on the shelf and back, and the humeral recess moves to the line of the sprout, and then the coquettees from the shelf and back are cut off along the previously planned lines of raglan. The coquette is arranged as follows: the coquette of the back is on the back of the sleeve, and the coquette of the shelf is on the front of the sleeve, retreating one and a half centimeters from the top cut and the midline of the sleeve.

As the model of a coat with a sleeve of a raglan is rather laconic, it is possible to decorate a coat with original pockets or unusual buttons.

Video master-classes for beginners