womensecr.com

Crafts made of cardboard: colored and corrugated cardboard

  • Crafts made of cardboard: colored and corrugated cardboard

    click fraud protection

    Crafts made of cardboard with their own hands: dog and dragon schemes and turn-based master class

    You can make a lot of things from cardboard, from trinkets to furniture, you just have to show your imagination. To make different crafts from cardboard with your own hands, the diagrams below can be safely used - they will help to make many different products.

    Carton box, step by step:

    The next, even more interesting product is the storage house:

    The following hand-craft will suit women of fashion, it is designed for storing ornaments:

    The following diagrams for making a phone stand are shown:

    We finish making a stand for the phone andwe begin to make a stand for discs:

    The following scheme is not just an odd job, but furniture for children:

    This is only a small part of what you can do with your own hands.

    Crafts made from corrugated cardboard also attract a lot of attention, because this is not an ordinary material for handicrafts, and its value is zero, because you can disassemble the box and paint the corrugated cardboard in the right color. After all, all have boxes from the purchased equipment, which manufacturers recommend to store during the warranty period.

    instagram viewer

    Color cardboard dog-holder

    This master class about crafts made of cardboard for children will show how to make a dog-artist.

    What is needed

    • Corrugated cardboard:
    • 44 orange stripes;
    • 4 - yellow;
    • 7 - plum;
    • Thermal gun or glue;
    • Eyes;
    • Ribbon.

    Torso:

    Glued from 6-7 orange stripes 2 long strips. Twist 2 ovals, for this, bend at 19 edges.

    It should look like this:

    Then you need to shape the trunk, for this, push the back as high as possible, but the top should be flat, because you will need to stick the neck there.

    The abdomen needs to be pulled out just a little bit, since it will need to stick 4 paws there.

    It is thick to glue the parts with glue so that they do not fall apart, and there were no slots

    To glue the parts together, the joint of the parts should be glued together with a strip

    Here is a torso:

    Head

    It is made just like the trunk, only of 3 strips and a round shape.

    Form the nape of the hemisphere

    The muzzle is like this:

    It's good to glue the glue inside, as in the photo.

    Glued both parts, and mask the seam with a separate strip:

    Neck

    Make 2 long strips, gluing together 2 strips of cardboard. Screw in 2 tablets and glue together.

    Ears

    From 2 yellow and 2 orange stripes glue 2 long and twist 2 of them.


    Give the ears a shape, for this, squeeze on one side and slightly push out with a wide. Lubricate with glue.

    Tarsi

    Twist 8 tablets, each with 1 stripe. Glued each other with 2 tablets.

    Fold one strip of yellow and orange in color and twist 4 cushions for the legs, make them slightly oval.

    Paste the cushions to the legs as in the photo:

    Glued the parts together as follows:

    Now glue the head to the torso:

    Then add the head with the ears:

    Caps

    To make the original accessory for the dog, you will need to wring out 3 strips of a tablet, squeeze outits sphere and smear glue inside.

    In order to make the fields of the cap, you need to cut 4 strips wide and glue the resulting 8 strips into 1 long one. Then twist them into a disc and slightly push out its middle. As usual, it is good to glue the middle and the fields with glue.

    When the glue dries a little, glue the details of the cap together and give it the desired shape.

    Had only to decorate the field of the hat to your taste and paste it on the dog's head.

    The height of this craft is 19 cm.

    From this master class you can see that it's not difficult to make crafts from corrugated cardboard, but they look very unusual.

    Of course, crafts made of corrugated cardboard or the creation of furniture from cardboard is a new and interesting, but do not forget about ordinary color cardboard. After all, if you apply fantasy, you can make from it as beautiful and interesting crafts.

    Dragon from color cardboard

    Color cardboard allows us to make extraordinarily beautiful hand-made articles! Only see what beautiful dragons you can do with your own hands!

    Our master class of crafts made of colored cardboard tells you how to make this cute dragon:

    What you need to prepare:

    • Draw or print items of the toy;
    • Scissors;
    • Adhesive;
    • Strong yarn.

    And here are the details:

    You select the dimensions of the parts yourself, depending on the desired size of the craft.

    Job Description

    Gently cut the parts.

    From rectangular parts, glue the cylinders, apply glue on the white strip.

    Impregnate the thread with glue. It should collect all the cylinders, from the largest to the smaller, between each of them should be a distance of about 0.5 cm.

    Press in the place of gluing that cylinder, which has a mustache, and glued to a large cylinder.

    Now you need to decorate the craft. For this, it is necessary to glue the dragon's feet, tail, eyes, wings, tongue and tuft.

    Such voluminous crafts can decorate any shelf, and if you make the thread on which the dragon gathers, longer, you can hang it.

    You can make a lot of things from cardboard, from trinkets to furniture, you just have to show your imagination. To make different crafts from cardboard with your own hands, the diagrams below can be safely used - they will help to make many different products.

    Cardboard box, step by step:

    The next, even more interesting product is a storage house:

    The following hand-craft will suit fashionistas, it is designed for storing ornaments:

    The following diagrams for making a phone stand are shown:

    We finish making a stand for the phone andwe begin to make a stand for discs:

    The following scheme is not just an odd job, but furniture for children:

    This is only a small part of what you can do with your own hands.

    Crafts made from corrugated cardboard also attract a lot of attention, because this is not an ordinary material for handicrafts, and its value is zero, because you can disassemble the box and paint the corrugated cardboard in the right color. After all, all have boxes from the purchased equipment, which manufacturers recommend to store during the warranty period.

    Color cardboard dogshop

    This master class about crafts made of cardboard for children will show how to make a dog-artist.

    What is needed

    • Corrugated cardboard:
    • 44 orange stripes;
    • 4 - yellow;
    • 7 - plum;
    • Thermal gun or glue;
    • Eyes;
    • Ribbon.

    Torso:

    Glued from 6-7 orange stripes 2 long strips. Twist 2 ovals, for this, bend at 19 edges.

    It should look like this:

    Then you need to shape the trunk, for this, push the back as high as possible, but the top should be flat, because you will need to stick the neck there.

    The abdomen needs to be pulled out just a little bit, since it will need to stick 4 paws there.

    Thickly grease the parts with glue so that they do not fall apart, and there were no slots

    Glued the parts together, the joint of the parts should be glued together with a strip

    Here is the torso:

    Head

    It is made just like the trunk, only of 3 strips and a round shape.

    Form the nape of the hemisphere

    The muzzle is made like this:

    It is good to glue the glue inside, as in the photo.

    Bond both parts, and mask the seam with a separate strip:

    Neck

    Make 2 long strips, gluing together 2 strips of cardboard. Screw in 2 tablets and glue together.

    Ears

    From 2 yellow and 2 orange stripes glue 2 long and twist 2 of them.


    Give the ears a shape, for this, squeeze on one side and push a little with the wide. Lubricate with glue.

    Paws

    Twist 8 tablets, each with 1 stripe. Glued each other with 2 tablets.

    Fold one strip of yellow and orange in color and twist 4 foot cushions from them, make them slightly oval.

    Glue the cushions to the legs as in the photo:

    Glued the parts together as follows:

    Now glue the head to the trunk:

    Then add the head with the ears:

    Caps

    To make the original accessory for the dog, you will need to twist the 3 strips of the tablet, squeeze outits sphere and smear glue inside.

    In order to make the fields of the cap, you need to cut 4 strips wide and glue the resulting 8 strips into 1 long one. Then twist them into a disc and slightly push out its middle. As usual, it is good to glue the middle and the fields with glue.

    When the glue dries a little, glue the details of the cap together and give it the desired shape.

    Had only to decorate the field of the hat to your taste and paste it on the dog's head.

    The height of this craft is 19 cm.

    From this master class you can see that it's not difficult to make corrugated cardboard artifacts, but they look very unusual. Of course, handmade corrugated cardboard or the creation of cardboard furniture is a new and interesting, but do not forget about ordinary color cardboard. After all, if you apply fantasy, then from it you can make no less beautiful and interesting crafts.

    Color cardboard dragon

    Color cardboard allows us to make extraordinarily beautiful hand-made articles! Only see what beautiful dragons you can do with your own hands!

    Our master class of crafts made of colored cardboard tells you how to make this cute dragon:

    What you need to prepare:

    • Draw or print the elements of the toy;
    • Scissors;
    • Adhesive;
    • Strong yarn.

    And here are the details:

    You select the dimensions of the parts yourself, depending on the desired size of the craft.

    Job Description

    Gently cut the parts.

    From the rectangular parts, glue the cylinders, apply glue on the white strip.

    Impregnate the thread with glue. On it it is necessary to collect all the cylinders, from the larger to the smaller, between each of them there should be a distance of about 0.5 cm.

    Press in the place of gluing that cylinder, which has a mustache, and glue it to a large cylinder.

    Now you need to decorate the craft. For this, it is necessary to glue the dragon's feet, tail, eyes, wings, tongue and tuft.

    Such voluminous crafts can decorate any shelf, and if you make a thread, on which the dragon gathers, it is longer, then you can hang it.