womensecr.com

How to tie a hat with your own hands: secrets of technology

  • How to tie a hat with your own hands: secrets of technology

    click fraud protection

    How to tie a hat with your own hands easily and easily

    Mastering a new material as a drug - I want to constantly learn something new. It's the same with knitting. Having mastered one technique or pattern, I want to learn to knit something complex. If earlier you were tormented by the question "how to tie a hat with knitting needles," today you are already interested in hats with a weird braid weave or jacquard pattern.

    So, if you've never tried knitting hats with braids, now is the time to try. In secret, there is nothing difficult to untie the Arans. And you will see for yourself when you start to knit a hat. And the appearance of this cap will not only please you, but will become the object of attention among your friends. Mentally prepare for inquiries like: "And where did you buy such a hat?".

    Intriguing? Then let's figure out how to knit a hat with knitting needles.

    Materials for work:

    • 1 hank of yarn
    • Knitting pin No. 13
    • Extra knitting
    • Yarn for yarn
    instagram viewer

    I decided to use enough solid yarn to visually enlarge braids on it, besides knitting from thick yarn does not take much time. And for beginners, this is the best way to control the process of knitting, so as not to lose loops and make an unmistakable calculation for the pattern.

    First of all, we as always knit a control sample. I made the 10x10 square with 9 loops and 12 tied rows.

    The total diameter of the hat turned out to be 56 cm.

    Work progress:

    We will knit straight, so we use straight knitting needles. We type on them 54 loops. The first 8 rows we unfasten with a rubber band 2x2 - this is a repetition of 2 faces. N and 2 of n from the beginning to the end of each row.

    Our braids will consist of 6 loops.

    1 р.with a pattern( front): 2 hp, 6 faces.p, 1 ap. The combination of loops should be repeated until the end of the series.

    2 р.We start with the removal of 1 persons.p., 6 of a.p.(this is the future braid), 2 persons.p. We continue the repetition of the combination from the loops to the end.

    Rows 1 and 2 need to be linked one more time.

    In the new series we begin the formation of the spit:

    We send 2 persons.p.according to the drawing, we remove the 3 loops on the other spoke( auxiliary) before knitting( i.e., before the main knitting needles), and 3 knits are pierced from the working knitting needle. Carefully peresnimaem all the loops back to the working knitting needle and tying faces.p, then 1 ap.p. And we knit to the end of the series.

    In the purl pattern, knitting continues on the pattern.

    Repeat the pattern, starting with the 1st row after the 2x2 gum, again 1 time. And now the formation of the crown of the head begins.

    1 row of vertex( facial): 2 hp, 6 faces., 1 ap. You should sweat the pattern to the last loop in the row.

    2nd row( purl): according to the drawing

    Repeat 1 and 2 rows for another 1 р.

    With the 5th row of the vertex, the loops of the loops begin.2 rel.p., now only 2 loops to move to add. Spoke, 2 loops from the main( left) knitting needle in 1 liter, 2 faces, and now return to the working needle 2 sts, again 1 ap. Follow the pattern pattern until the last loop.

    6 the row is knitted according to the figure without any reduction.

    In the 7th row we again reduce the number of loops: 2 hp, 2 persons.p.together, 1 persons.p., 2 persons.p.together, 1 ap. P Continue to repeat the rapport until the end of the series.

    8 row - according to the figure.

    In the 9th row of decreasing do according to the scheme: from 2 ex.to untangle 1, 1 loop to resample to an additional spin, 2 persons.p.together, return the loop to the working knitting needle and tie the faces.p., 1 ap.

    The last 10 rows consist of rapport: 9 times repeat knitting 2 reps.

    The number of loops left on the needles should be pulled into the ring using a needle for the yarn and a tail from the thread that the cap itself was knitting. The remaining tip of the thread will also be used to form the rear seam of the cap. Thread at the end of the seam and secure the tip on the wrong side.

    That's what we got. A very large and interesting hat with braids. By the way, this model is called "oversize", which means "not in size".This is a very trendy trend this autumn and winter. So be sure that the time spent on learning the question of "how to tie a hat with your own hands" did not go away just like that.

    Mastering a new material as a drug - I want to constantly learn something new. It's the same with knitting. Having mastered one technique or pattern, I want to learn to knit something complex. If earlier you were tormented by the question "how to tie a hat with knitting needles," today you are already interested in hats with a weird braid weave or jacquard pattern.

    So, if you've never tried knitting hats with braids, now is the time to try. In secret, there is nothing difficult to untie the Arans. And you will see for yourself when you start to knit a hat. And the appearance of this cap will not only please you, but will become the object of attention among your friends. Mentally prepare for inquiries like: "And where did you buy such a cap?".

    Intriguing? Then let's figure out how to knit a hat with knitting needles.

    Materials for work:

    • 1 hank of yarn
    • Knitting needle No. 13
    • Extra knitting
    • Yarn for yarn

    I decided to use enough solid yarn to visually enlarge the braids on it, besides knitting from thick yarn does not take much time. And for beginners, this is the best way to control the process of knitting, so as not to lose loops and make an unmistakable calculation for the pattern.

    First of all, we as always knit a control sample. I made the 10x10 square with 9 loops and 12 tied rows.

    The total diameter of the hat turned out to be 56 cm.

    Work progress:

    We will knit straight, so we use straight knitting needles. We type on them 54 loops. The first 8 rows we unfasten with an elastic band 2x2 - this is a repetition of 2 faces. N and 2 of n from the beginning to the end of each row.

    Our braids will consist of 6 loops.

    1 р.with a pattern( front): 2 hp, 6 faces.p, 1 ap. The combination of loops should be repeated until the end of the series.

    2 р.We start with the removal of 1 persons.p., 6 of a.p.(this is the future braid), 2 persons.p. We continue the repetition of the combination from the loops to the end.

    Rows 1 and 2 need to be linked one more time.

    In the new series, we begin the formation of the spit:

    We handle 2 persons.p.according to the drawing, we remove the 3 loops on the other spoke( auxiliary) before knitting( i.e., before the main knitting needles), and 3 knits are pierced from the working knitting needle. Carefully peresnimaem all the loops back to the working knitting needle and tying faces.p, then 1 ap.p. And we knit to the end of the series.

    In the purl pattern, knitting continues on the pattern.

    Repeat the pattern, starting with the 1st row after the 2x2 gum, again 1 time. And now the formation of the crown of the head begins.

    1 row of vertex( facial): 2 hp, 6 faces., 1 aph. You should sweat the pattern to the last loop in the row.

    2nd row( purl): according to the drawing

    Repeat 1 and 2 rows for another 1 р.

    With the 5th row of the vertex, the loops of the loops begin.2 rel.p., now only 2 loops to move to add. Spoke, 2 loops from the main( left) knitting needle in 1 liter, 2 faces, and now return to the working needle 2 sts, again 1 ap. Follow the pattern pattern until the last loop.

    6 the row is knitted according to the figure without any reduction.

    In the 7th row we again reduce the number of loops: 2 hp, 2 persons.p.together, 1 persons.p., 2 persons.p.together, 1 ap. P Continue to repeat the rapport until the end of the series.

    8 row - according to the figure.

    In the 9th row of decreasing do according to the scheme: from 2 ex.to untangle 1, 1 loop to resample to an additional spin, 2 persons.p.together, return the loop to the working knitting needle and tie the faces.p., 1 ap.

    The last 10 rows consist of rapport: 9 times repeat knitting 2 reps.

    The number of loops left on the needles should be pulled into the ring using a needle for the yarn and a tail from the thread that the cap itself was knitting. The remaining tip of the thread will also be used to form the rear seam of the cap. Thread at the end of the seam and secure the tip on the wrong side.

    That's what we got. A very large and interesting hat with braids. By the way, this model is called "oversize", which means "not in size".This is a very trendy trend this autumn and winter. So be sure that the time spent on learning the question of "how to tie a hat with your own hands" did not go away just like that.