Bead harness: product schematic in different techniques with step by step instructions

Bead harness is one of the most popular jewelry and beads. After all, they are completely universal, so they can be worn with pendants and pendants or worn by themselves. There are many types of weaving plaits. In this article, we will show you how to weave a bead from a bead: the diagram of each kind of weaving will help you determine the most suitable variant for you.

What are the bundles of beads

So, let's look at the different types of these products.

Square

Weaving the beads with a tetrahedral method is the simplest, so we will start with it. It is enough to follow each stage, written in the following scheme:

In the end, you should get this harness:

Another name for it is a square tourniquet. It is popular because it is possible to weave it with a variety of shapes, and it can be plaited anywhere - the main thing is to understand the principle.

Turkish

In addition to a square bundle, the Turkish harness is also very famous. The Turkish tourniquet is one of the types of knitted harness. He knits quickly enough and mono to make a completely different-looking rope, using all sorts of beads, pebbles, bugles.

In the end, this should be something like this:

Take a look at this lesson:

American

The American tourniquet is popular among Western masters.

See the video for details.

Openwork

And here is an openwork tourniquet. The same tubular grid. You can use not only beads, but also beads, rhinestones, stones, glass beads to weave an openwork bundle.

Ndebele

African harness, Ndebele.

Mosaic harness

Technique of weaving

On how to weave a bead of beads - a master class that will detail and in pictures tell about the amazing technique that allows to create such stylish jewelry:

So, in our master class we will try to tie a Turkish bracelet with a plait of beadscrocheted.

Materials needed:

• Beads( 2 colors);
• Beads( 1mm);
• Fittings for jewelry( fixer for tips);
• Lock;
• Rings for connection;
• Caps to beads;
• Chain;
• Threads( by the color of beads), for example Iris. Thickness - №10;
• Pins with hats;
• Hook 0.9;
• Needle( long);
• Pliers.

Making a bracelet of the

harness 1) To get a bracelet about 16cm long, thread 9 white beads and one silver one( each such block is called "rapport").And alternate them so long as the length of the thread with the beads does not become 2 meta. The last one is a silver bead.

2) We make a knot on the thread and we sew 10 air loops, which are closed in a circle with the help of a column without a crochet.

3) In a circle, we fasten the bars without a crochet. In each row there are 10 loops. So we need to tie 2 rows, then we begin to weave beads. It is necessary to move one rapport closer to the hook, which must be wound under a loop and pick up a thread with a bead.

4) Next, you need to pull out the thread and leave the bead from the front side, turning the bracelet to the wrong side. Bead must be turned sideways and begin to tie the floor in a column. A thread stretch into a loop. And so all the rapport is knitted( 10 beads).

5) Then the next row is knit. To do this, you need to enter the hook into the loop with a bead around the bead. Bead, which in the first row - turns so as to be to the right of the hook. The first bead in the row is the second, and so on.

6) It is important that beads are not lost in the series. For this purpose, beads, which are already woven into the thread, need to be lifted up with holes, and not woven - holes to the side. And so we tie the tourniquet to the length we need.

7) You need to take a pin with a hat, and tighten the hat, so that it takes the form of a hook. The tip is bent and the pin is threaded through the tip of the bundle. The hat is pressed tightly to the pin. The cap is worn on a tourniquet and pin. Next, bend the pin at an angle of 90 degrees to the cap. We remove the surplus. The tail should be about 1 cm.

8) Next, you need to grab the pin so that its end does not protrude in the edges of the forceps. Then he wraps himself with tongs. Should get a loop in which the connecting ring

9) On both sides of the bracelet we chain and lock. The rings are connected. On the chain also mono hang beads.

As a result, we get a wonderful bracelet

Figures on the bundles can be very different, the main thing is to follow the order of the set of beads, which dictate the patterns of knitted harnesses from beads.

We wish you success in weaving and knitting beetles from beads!

Video Tutorials for beginners