womensecr.com

Bead jewelry for beginners: schemes, photos and MK with video

  • Bead jewelry for beginners: schemes, photos and MK with video

    click fraud protection

    Bead jewelery for beginners: step by step master classes on weaving bracelet and pendant

    Being able to weave decorations from beads means to be able to present unique gifts to your loved ones, as well as make yourself stylish and unique things for yourself. We suggest you pass a master class on decorations from beads for beginners. A little patience, accuracy, accuracy, and you will become the owner of a stylish decoration.

    Bracelet-beads for beginners

    Materials:

    • Beads №10( green, yellow);
    • Nylon thread;
    • Needle;
    • Lock for the bracelet.

    Instructions for creating a bracelet.

    This bracelet is braided on a kapron thread. It is better to take a thread that is easy to work with and, if necessary, add a new one.

    Stage 1

    Create a "stop bead".To do this, use a needle to place one yellow bead about 15 cm from the tip of the thread, and then pass the needle from that side. With which they began to weave. The thread is tightened.

    This is done so that on the remaining tip of the thread in the future to install the clasp, and when the work is done, it is removed.

    instagram viewer

    Stage 2

    We string the beads: 4 yellow and 3 green. Next, you need to pass the needle through the 4 yellow beads( do not touch the stop-bead) and tighten the thread

    Stage 3

    Thread the beads on the thread: 1 yellow and 3 green. The needle must again be passed through the last 4 yellow beads( from the side with which the weave was started).The thread is tightened.

    The third stage must be repeated several times until the bracelet reaches the desired length. It should be remembered about tightening the thread - weaving should be tight.

    The result should be a flagellum of beads, as in the photo below:

    Stage 4

    We make a buckle. To do this, string seven green beads, after which the thread is passed through an extreme yellow bead on the reverse side. Then the thread is passed through 4 green beads from the last strung by us.

    The thread is threaded into the buckle and removed from the back of the bead from which it comes out. After that, the thread is fixed and tied to a knot.

    Similarly, fasten the second part of the fastener to the other end of the bracelet, not forgetting to remove the stop-bead, so as not to create an empty space between the lock and the bracelet.
    Stylish and bright bracelet is ready.

    There are other simple ornaments from beads: their schemes are clear, including beginners.

    For example, such elegant necklaces:

    Jewelery embroidered with beads

    In addition to jewelry made from beads, there are also beaded embellishments. With the help of this technique you can make for yourself completely unique things, any design, shape and color. It all depends on the author's fantasy flight.

    Such ornaments from beads by their own hands can be made even by a novice craftsman, especially if they follow such steps:

    • It's good to think over the sketch of the future decoration, to draw it on paper. If you come up with something very difficult - the design of jewelry will prompt fashion magazines, jewelry catalogs.
    • Use for embroidery a thick fabric such as felt or cloth. They do not require treatment, and for greater stiffness they are usually glued to non-woven fabric.
    • Next, the picture is transferred to the fabric and cut into shape.
    • Beaded embroidery pattern, transferred to the fabric - in the colors that the author conceived.
    • After the embroidery process is completed, it is necessary to sew a lining( usually made of leather) to the decoration.

    We offer you to watch a video of a masterclass on making an elegant necklace in the technique of "beadwork embroidery":

    Many craftswomen, embroidering beads, often use stones - they make jewelry richer, give a significant, solid look.

    Jewelry made of beads and stones make it somewhat more difficult, because of the peculiarity of the stones themselves - the texture, color, transparency is very important. Proceeding from it, under a stone the beads are picked up, and from how much it is correctly made, depends on whether the ornament will "play", whether it will attract the views of others. Therefore, the sense of taste of the master, his style, and the subtlety of perception are important here.

    MK on manufacturing of a pendant from beads

    Below the master class on creation of a bright pendant is resulted.

    Materials needed:

    • Cabochons, rhodochrosite - 1 pc;
    • Two quartz cabochons( small and oval);Cabochon made of agate, round;
    • Rivoli - 1 piece;
    • Pearls( 2 small, 20 medium);
    • 20 pearls of the biwa;
    • Quartz and pearly leaves( 3 and 4 pcs);
    • Beads;
    • Paper;
    • Fabric;
    • Leather.

    Instruction for manufacturing

    Step 1.

    It is necessary to mark out the fabric and place the cabochon on it. We stick it

    http: // img.happy-giraffe.en /thumbs/580x1000/183182/ 761b1e33f5705b8de8d9e2e0e257853b.jpg

    Stage 2.

    Embroider the cabochon around the circle with beads. First, typing on a needle three white beads, a stitch is made. The needle stretches out of the fabric and is carried through the last bead, and then 3 beads are again recruited to it.

    Stage 3.

    The second round of beads is mosaic plaited.

    Stage 4.

    After the cladding, the stone is decorated with gold beads.

    Stage 5.

    We mark the places of the next stone - the crystal( rivoli, round).It is glued and wrapped, as well as the previous one. Beads for this crystal are better to take larger.

    Stage 6.

    Large quartz cabochons are glued, they are also beaded with mosaic weaving. We make out the crystal.

    Stage 7.

    Agate stone is adhered to the base. It is lined with one row of beads, and two tiny pearls are glued on top.

    Stage 8.

    The pendant is cut out, and on its underside is glued paper cut off by its shape, and after it - the skin. The edges need to be sewn.

    For this, 2 beads are put on the needle. Sew up, and the needle is threaded through the last one. Then on it string 2 beads and so the whole edge is lined.

    The pendant is decorated on both sides:

    Stage 9.

    Pendant decoration fringed. The remaining material is used:

    Step 10:

    Loop weaving. There are several options - or weave it with a continuous cloth, or sew a metal ring.

    The ribbon and the necklace are done!
    To create such beautiful things, of course, it takes a lot of assiduity, but what a pleasure the master feels, from under whose hands masterpieces leave. After all, from beads do not only decorations: beadwork of icons, paintings, clothes, accessories help masters express their imagination, show creativity of thinking, make their image fashionable. After all, whatever they say, the beads are never out of fashion.

    Video tutorials specially for you

    Stylish earrings:

    Necklace:

    Complete set:

    Be able to weave decorations from beads - means to be able to present unique gifts to your relatives, and also to make for oneself stylish and unique things. We suggest you pass a master class on decorations from beads for beginners. A little patience, accuracy, accuracy, and you will become the owner of a stylish decoration.

    Bracelet-beads for beginners

    Materials:

    • Beads №10( green, yellow);
    • Nylon thread;
    • Needle;
    • Lock for the bracelet.

    Instructions for creating a bracelet.

    This bracelet is braided on a kapron thread. It is better to take a thread that is easy to work with and, if necessary, add a new one.

    Stage 1

    Create a "stop bead".To do this, use a needle to place one yellow bead about 15 cm from the tip of the thread, and then pass the needle from that side. With which they began to weave. The thread is tightened.

    This is done so that on the remaining tip of the thread in the future to install the clasp, and when the work is done, it is removed.

    Stage 2

    We string the beads: 4 yellow and 3 green. Then you need to skip the needle through 4 yellow beads( do not touch the stop-bead) and tighten the thread

    Stage 3

    Thread the beads on the thread: 1 yellow and 3 green. The needle must again be passed through the last 4 yellow beads( from the side with which the weave was started).The thread is tightened.

    The third stage must be repeated several times until the bracelet reaches the desired length. It should be remembered about tightening the thread - weaving should be tight.

    The result should be a flagellum of beads, as in the photo below:

    Stage 4

    We make a buckle. To do this, string seven green beads, after which the thread is passed through an extreme yellow bead on the reverse side. Then the thread is passed through 4 green beads from the last strung by us.

    The thread is threaded into the buckle and is removed from the back of the bead from which it comes out. After that, the thread is fixed and tied to a knot.

    Similarly, we fix the second part of the fastener on the other end of the bracelet, not forgetting to remove the stop-bead, so as not to create an empty space between the lock and the bracelet.
    Stylish and bright bracelet is ready.

    There are other simple ornaments from beads: their patterns are clear, including to beginners.

    For example, such elegant necklaces:

    Jewelery embroidered with beads

    In addition to jewelry made from beads, there are also beaded embellishments. With the help of this technique you can make for yourself completely unique things, any design, shape and color. It all depends on the author's fantasy flight.

    Such ornaments from beads by their own hands can make even a novice craftsman, especially if he follows such steps:

    • It's good to think over the sketch of the future decoration, to draw it on paper. If you come up with something very difficult - the design of jewelry will prompt fashion magazines, jewelry catalogs.
    • Use for embroidery a thick fabric such as felt or cloth. They do not require treatment, and for greater stiffness they are usually glued to non-woven fabric.
    • The picture is then transferred to the fabric and cut into shape.
    • Beaded embroidery pattern, transferred to the fabric - in the colors that the author conceived.
    • After the embroidery process is completed, the lining( usually made of leather) must be sewn to the decoration.

    We offer you to watch a video of a master class on the manufacture of an elegant necklace in the technique of "beadwork embroidery":

    Many craftswomen, embroidering beads, often use stones - they make jewelry richer, give a meaningful, solid look.

    Jewelery from beads and stones make it somewhat more difficult, because of the peculiarity of the stones themselves - the texture, color, transparency is very important. Proceeding from it, under a stone the beads are picked up, and from how much it is correctly made, depends whether the ornament will play, whether it will attract the views of others. Therefore, the sense of taste of the master, his style, and the subtlety of perception are important here.

    MK on manufacturing of a pendant from beads

    Below the master class on creation of a bright pendant is resulted.

    Required Materials:

    • Cabochons, rhodochrosite - 1 pc;
    • Two quartz cabochons( small and oval);Cabochon made of agate, round;
    • Rivoli - 1 piece;
    • Pearls( 2 small, 20 medium);
    • 20 pearls of biwa;
    • Quartz and pearly leaves( 3 and 4 pcs);
    • Beads;
    • Paper;
    • Fabric;
    • Leather.

    Instruction for manufacturing

    Step 1.

    It is necessary to mark out the fabric and place the cabochon on it. We stick it

    http: // img.happy-giraffe.en /thumbs/580x1000/183182/ 761b1e33f5705b8de8d9e2e0e257853b.jpg

    Step 2.

    Embroider the cabochon around the circle with beads. First, typing on a needle three white beads, a stitch is made. The needle stretches out of the fabric and is carried through the last bead, and then 3 beads are again recruited to it.

    Stage 3.

    The second round of beads is mosaic plaited.

    Stage 4.

    After the cladding, the stone is decorated with gold beads.

    Stage 5.

    We mark the places of the next stone - the crystal( rivoli, round).It is glued and wrapped, as well as the previous one. Beads for this crystal are better to take larger.

    Stage 6.

    Large quartz cabochons are glued, they are also beaded with mosaic weaving. We make out the crystal.

    Stage 7.

    Agate stone is adhered to the base. It is lined with one row of beads, and two tiny pearls are glued on top.

    Stage 8.

    The pendant is cut out, and on its underside is glued paper cut off by its shape, and after it - the skin. The edges need to be sewn.

    For this, 2 beads are worn on the needle. Sew up, and the needle is threaded through the last one. Then on it string 2 beads and so the whole edge is lined.

    The pendant is decorated on two sides:

    Stage 9.

    Pendant decoration fringed. The remaining material is used:

    Step 10:

    Loop weaving. There are several options - or weave it with a continuous cloth, or sew a metal ring.

    The ribbon and the necklace are done!
    To create such beautiful things, of course, it takes a lot of assiduity, but what a pleasure the master feels, from under whose hands masterpieces leave. After all, from beads do not only decorations: beadwork of icons, paintings, clothes, accessories help masters express their imagination, show creativity of thinking, make their image fashionable. After all, whatever they say, the beads are never out of fashion.

    Video tutorials specially for you

    Stylish earrings:

    Necklace:

    Complete set: