School apron: a pattern for guipure for a girl
School apron: pattern and master class for tailoring
School aprons as an obligatory attribute of the form of the girls have long been outdated. However, at the same time they are still a symbol of the school age and decorates the form of schoolgirls on September 1 or on the graduating line. Preparing for these events, many are looking for aprons in the city's shops, however, it is not always possible to find one as we would like. And in this case, sewing will come to the rescue, thanks to which you can fulfill your dream and sew a school apron. The pattern that we will provide is quite universal, it can be increased or reduced to the required size when needed.
Pattern
Ready-made pattern of school apron from guipure or from any other material - as you like. Dimensions - 42-46, height 168. Download it on the link, print.
Master class
1. Before opening the fabric, you need to determine the length of the straps. To do this, measure the distance from the point on the waist in front and, leading a centimeter tape over the shoulder, from behind.
2. You also need to determine the length of the apron itself. On the pattern, the blue line divides the apron and frill itself.
3. Using a paper pattern, we cut out the fabric for the apron without taking into account the length of the frill, just cut the frill itself and straps.
4. Please note that the length of the cut material for the strap must be the actual length measured by us at the beginning plus half of this value. This option is ideal if small creases are made. The width of the strap is 9 cm
5. The width of the frills for straps, each determines to your taste. However, if you make it more than 15 cm, they can get too big and look unaesthetic. However, if the big "wings" are important for the girl, this option also has a place to be.
6. Then proceed to cut the insertion of the shelf. If the upper part is trimmed with sewing, tailoring taking into account the sewing width. The allowances on the sides are 3 cm wide( the width of the finished strap), below is also 3 cm-the width of the belt.
7. The belt for the school uniform is cut with one detail with a bow. The figure shows a schematic depiction of the belt without allowance for seam allowances. On the same cloth we cut, considering them.
Note: if we use a denser fabric for our apron than our organza, it will be convenient to assemble the ruffles on the straps with spandex rubber. In this case, the canvas of the apron is cut by one datum with a fold, and the ruffles are cut by a scythe - its length is 2 m and the width is 7 cm. The seam allowance along the side cut is 3 cm, the bottom cut is 3 cm, and the top cut is 1 cm.we have 13 cm long straps and a length in the size of our measurement made at the beginning, plus 2/3 of this value.
8. Let's start sewing.
For embroideries overlock sewing sewing. Add on the front side of the finishing line.
9. By laying small creases, we sew the frill to the apron, also make the finishing line, as on the frills of the straps.
10. Sew the straps into the insert. To begin with, we try the fitting and straighten the straps and the shelf with the pins at the dummy, positioning it at the desired level. Determine where to lay the folds better.
11. We collect the parts together, stitching the overlock. On the front side we lay a finishing line.
12. The middle of the belt and the middle of the upper part are combined, we make a marking, laying small sweets. We are grinding. We turn the belt, not forgetting to make a finishing line.
13. White apron is almost ready, it remains to fasten straps on the back. You can just sew them, or you can get the second option, do the following:
- to tie the strap back to the first wrinkle, cut the bottom piece obliquely;
- gently stymied and get the result in the end:
Try on the apron for the last time and sew straps in the right place.
The apron is ready!
Video lessons for beginners
How to sew a beautiful openwork apron school apron, also will tell a video:
School aprons as an obligatory attribute of the girl's form have long been obsolete. However, at the same time they are still a symbol of the school age and decorates the form of schoolgirls on September 1 or on the graduating line. Preparing for these events, many are looking for aprons in the city's shops, however, it is not always possible to find one as we would like. And in this case, sewing will come to the rescue, thanks to which you can fulfill your dream and sew a school apron. The pattern that we will provide is quite universal, it can be increased or reduced to the required size when needed.
Pattern
A ready-made pattern of school apron from guipure or from any other material - as you like. Dimensions - 42-46, height 168. Download it on the link, print.
Master Class
1. Before cutting the fabric, you need to determine the length of the straps. To do this, measure the distance from the point on the waist in front and, leading a centimeter tape over the shoulder, from behind.
2. You also need to determine the length of the apron itself. On the pattern, the blue line divides the apron and frill itself.
3. Using a paper pattern, we cut out the fabric for the apron without taking into account the length of the frill, just cut the frill and straps.
4. Please note that the length of the cut material for the strap must be the length actually measured by us at the beginning plus half of this value. This option is ideal if small creases are made. The width of the strap is 9 cm.
5. The width of the frills for straps is determined by each. However, if you make it more than 15 cm, they can get too big and look unaesthetic. However, if the big "wings" are important for the girl, this option also has a place to be.
6. Then proceed to cut the insertion of the shelf. If the upper part is trimmed with sewing, tailoring taking into account the sewing width. The allowances on the sides are 3 cm wide( the width of the finished strap), below is also 3 cm-the width of the belt.
7. The belt for the school uniform is cut with one detail with a bow. The figure shows a schematic depiction of the belt without regard to allowances for seams. On the same cloth we cut, considering them.
Note: if we use a denser fabric for our apron than our organza, it will be convenient to assemble the ruffles on the straps with spandex rubber. In this case, the canvas of the apron is cut by one datum with a fold, and the ruffles are cut by a scythe - its length is 2 m and width is 7 cm. The seam allowance along the side cut is 3 cm, the bottom is also 3 cm, and the top is 1 cm.we have 13 cm long straps and a length in the size of our measurement made at the beginning, plus 2/3 of this value.
8. Let's start sewing.
For embroidery overlock sewing sewing. Add on the front side of the finishing line.
9. By laying small creases, we sew the frill to the apron, also make the finishing line, as on the frills of the straps.
10. Sew the straps into the insert. To begin with, we try the fitting and straighten the straps and the shelf with the pins at the dummy, positioning it at the desired level. Determine where to lay the folds better.
11. We collect the parts together, stitching the overlock. On the front side we lay a finishing line.
12. The middle of the belt and the middle of the upper part are combined, we make a marking, laying small sweets. We are grinding. We turn the belt, not forgetting to make a finishing line.
13. White apron is almost ready, it remains to fasten straps on the back. You can just sew them, or you can get the second option, do the following:
- to tie the strap back to the first wrinkle, cut the bottom piece obliquely;
- gently stymied and get the result in the end:
Try on the apron for the last time and sew straps in the right place.
The apron is ready!
Video lessons for beginners
How to sew a beautiful openwork apron school apron, also will tell a video: