Shal haruni: scheme and description of work with step-by-step photos

Today we will tell you how to tie a shawl haruni: the scheme and description are given below.

What is needed

• Yarn wool 40%, acrylic 60%;
• Circular knitting needles No. 4.

Description of work

Type a crochet on a thread of a different color 7 cp.

Lift 3 loops with a hook.

Link one p.persons.etc., then gartered with 5 rows. Kromochnye loops can be left, but you can not leave.

3 loops on the line and 3 on the spoke. To get from the edge of 3 more points.

Transfer the hinges from the edge to the spoke, get 6 loops on the spoke, dissolve the pigtail and tie 3 loops from the line with the front. It turned out on the spoke 9 loops.

Transfer all loops to circular long needles, turn knitting and knit according to scheme A.

Knitting scheme of shawl haruni:

The diagram shows the first half of the shawl and there are no edge and central loops. The left part of the shawl is knit like the right.

It is not difficult to tie a shawl and even a novice needlewoman can do it. Shal haruni, the description of which is given in this master class, turns out to be very gentle and airy.

Description for rows

1: edge, cap( n), front( l.)., N., L., center loop( CPU), n., L., N., edge( usually the edge at the beginning is 3l., and at the end of the series there are 2 liters of 1 liter).

2: Edge, all out., Hem. So every even number matches.

It is necessary to note the CPU in order not to lose it. It is necessary to remember that before and after the edge and, before and after the CPU, there must necessarily be a crochet.

3: Edge, n., L., n., L., n., L., n., CPU, N., L., N., L., N., L., N., n., Edge. That is, before the CPU as many loops as after and they knit in the same order.

5: Edge, n., Together( cm).2 p., L., N., L., N., L., 2 with a broach( remove n, second knit l and extend through 1), n., CPU, repeat from the beginning( without edges) to the CPU andedge.

7: Edge, n., Vm.2 p., 2 l.,., L., N., 2 l., 2 p. Extensions, n., CPU, repeat the first part and the edge.

9: Edge, n., L., N., 2 p. Extension, 5 l., Meas.2 n., N., L., N., CPU, repeat and edge.

11: Edge, n., L., N., L., N., L., 2 st length, 3 l., Vm.2 n., L., N., L., N., L., N., CP, repeat and the edge.

If you can not knit by description, then you can see the shawl haruni master class video, in which everything will be clearly visible.

13: Edge, n., Vm.2 p., L., N., L., N., 2, 2 p. Ext., L., cms.2 items, 2 l., N., L., N., L., vm.2 n., N., CPU, repeat and edge.

15: Edge, n., Vm.2 p., 2 l.,., L., N., 3 l., Remove the 2 n., Tie off the l.and stretch through the removed( out of 3 loops turned out 1), 3 l., N., L., N., 2 l., vm.2 n., N., CPU, repeat from the beginning to the CPU and the edge.

17: Edge, 2 l., Н., Л., Н., 2 extension, 5 л., Вм.2 items, n., L., Н., 2 extension, 5 l., Вм.2 n., N., L., N., CPU, repeat and edge.

19: Edge, n.l., н., л., н., л., 2 Extension, 3 л., вм.2 p., L., N., L., N., L., 2 extension, 3 liters., Vm.2 p., L., N.L., N., L., N., CPU, repeat and edge.

21: Edge, n., Vm.2 p., L., N., L., N., 2 l., 2 extension, L., vm.2 p., 2 h., N., L., N., 2 l., 2 extension, L., cm.2 p., 2 h., N., L., N., L., 2 extension, N., CPU, repeat and edge.

23: Edge, n., Vm.2 p., 2 l.,., L.,., 3 l., Make from 1 item of three, 3 l.,., L., N., 3 l., Again from 3 p.make 1, 3 l.,., l.,., 2 l., 2 broaches, nakid, CP, repeat and the edge.

25: Edge, 2 l., N., L., N., 2 long, 5 l., Vm.2 items, n., L., Н., 2 extension, 5 l., Вм.2 items, n., L., Н., 2 extension, 5 l., Вм.2 n., N., L., N., CPU, repeat and edge.

Continue this way to 32 rows.

The photo shows how circuit A looks, tied once, then the pattern needs to be repeated pattern 17 to 32 row.

Knit by the scheme A until until there are 12 "cuttings" on both sides of the CPU, then you need to repeat 17-32 rubles., 4 more times. If it is necessary to reduce or enlarge the shawl, then at the end of the scheme A there must be an even number of "cuttings" in each half.

Fully tied circuit A.

Next, you need to knit the circuit B.

1: Edgeband, 2 l., * N., L., N., 2 broaches, 2 l.,., 2 broaches, n., 2 l., From three sts to make 1, 2 l., н., вм.2 n., Н., 2 л., Вм.2 points *.Repeat the pattern from * to *.Before the CPU to bind the yellow nkaid( see the diagram) and after the CPU start the row with the yellow cape.

2: with back loops.

3: Edge, * n., L., N., L., N., L., N., 2 broaches, 2 h., N., 2 broaches, n., L., make out of three1, L., N., vm.2 n., Н., 2 л., Вм.2 points *.Then repeat from * to *.

At the point where the leaf in the scheme A ends( from 3 points we do 1), according to the scheme B, we must also do from three points 1 and form a cutting over the next leaf. Continue the path from the crochets where the shroud ended, but the paths should go to each other's meeting, they need to be brought together, making three out of 1.

The CPU continues to knit the front, on both sides of the nakid.

Loosen loops in rows 17-27 to form leaves, loops to add only between leaves, but not between groups of leaves( shown in pink in the diagram).The

CPU is no longer available, starting from the 17th row, it is replaced by the central section( in the diagram it is highlighted in pink).The edge is knitted as follows: н., Вм.2 items, 2 liters. In the 17th row there are special loops that need to be paid attention.

17: Edge, l., 2 broaches, n., 2 broaches, 11 l., Vm.2 pcs.,., 3 l.,., 2 extension, 11 l., 2 remove, l., Broach, * n., 2 remove, broach, n., 2 remove, l., Broach,11 liters, vm.2 items, n., 3 l.,., 2 extension, 11 l., 2 remove, broach *.Instead of 2 points in front of the CPU 2 together, n., L., N., Cp, n., L., N., Farther from * to *, at the very end of the series instead of 2 n., Vm.2 items, n., Vm.2 items, 2 liters.

With 17 rows of leaves narrow. The drawing continues similarly. Azhur between sheets, where vm.3 points and remains.

Next, knit to the end according to the scheme B.

Now you need to close the hinges. There are 2 options for closing.

1: Hook the wire in cm.4 liters, 6 bp, ca.3 p., Close the hinge of 1 loop over the knotted point, 6 bp, vm.3 items, 1 item close. Continue this way, tying vm.3 items, they must close the top of each sheet. The first 4 liters.st.were for the edge.

2:2 n., 2 vm., Return n. To the left knitting needle., Tie them back, again return and 2 stitches back. In total, you need to tie these 2 sts 8 times, you should get a cord. Hold these 2 sts on the right-hand spoke, tie it back in.3 p., Close 1 pt., Throw over the medium just pegged, remove it from the spoke and return the 2 remaining p. To the left, 2 l. Repeat this way around the edge of the shawl, keeping in mind that 3 sts knit together cover the top of the leaf.

The photo shows 1 option of closing.

Hide the tips of the threads, then soak the shawl and stretch it, giving it a little crescent shape.

That's ready shawl haruni, the master class came to an end.

Video tutorials for a better understanding

Watching the training MC from Ludmila Ten: