Shamballa Bracelet with my own hands: a master class on double weaving with photo and video
Shamballa Bracelet with your own hands on the example of double weaving
All girls like different jewelry and jewelry, and when this piece is made by hand, it is not only beautiful, but also exclusive.
There are quite a few varieties of bracelets. Today we will consider how to make a shamballa bracelet with your own hands.
These bracelets are based on macrame techniques. These bracelets look beautiful and carry the energy that the needlewoman puts into it.
Where to start braiding
First of all, you need to buy tools and accessories for the bracelet. The basis of the bracelet is the beads. They need about 20 pieces, but it all depends on the size of the beads and the required length. To connect these beads you will need a thin cord or special thread. The main thing is that the thread size coincides with the diameter of the bead hole. Also essential tools for making the bracelet are scissors, superglue and scotch tape.
Every needlewoman should be interested in this bracelet, because it is quite easy to weave it. It can be made to your liking, and it will become your real talisman. Before you start, you need to choose the color of the cord and the type of beads. Nowadays, there are many varieties of the required material, thanks to this your bracelet can turn out to be unique.
Before starting the manufacture of the bracelet, please be patient, since the first time you can not get exactly what you saw in the picture or in the store, but when you type your hand, you will find it very easy to work with such an ornament.
Master-class: Shamball bracelet by one's own hands - double weaving with step-by-step photos
If you are already familiar with the technique of doing such bracelets, then you will need no more than 30 minutes for weaving.
1. Take two 25 cm long strands, make knots at the ends and put one bead on each thread, these strings are called internal threads. Now take a working thread 120 cm long and tie it inner at a distance of 2-3 cm
2. For each inner thread you need to put about 12 beads, with the first bead of the left thread and the last right be slightly smaller than all the others, this is necessaryso that their location is even.
In order for the inner threads to be pulled in the subsequent process, they must be firmly fixed to the edge of the table, for example, by a large clamp.
3. Strongly tighten the threads and tightly slide the beads to the weave. Next, one of the working threads wind the base spirally clockwise, the second end do the same, but in the opposite direction.
4. When the main part of the bracelet is ready, you need to tie the ends of the inner threads of the working thread again, just like in the beginning, 2-3 cm, put the beads on them and tie the knots.
We make the fastener
We need special attention for weaving the fastener.
It is necessary to fold the ends of the bracelet parallel to each other and put a thread under them. Further, this thread needs to make knots around the ends, they should be about 5-8, depends on the size of your bracelet. When the knots are made, the remaining thread must be cut off, and the ends should be fixed with superglue so that the thread does not untie and the bracelet does not fall apart. Remember that the glue needs to drip into the knot and then tighten, so the clasp will be fixed.
Detailed video lessons:
All girls love different decorations and costume jewelery, and when this piece is made by own hands, it is not only beautiful, but also exclusive.
There are quite a few varieties of bracelets. Today we will consider how to make a shamballa bracelet with your own hands.
These bracelets are based on macrame techniques. These bracelets look beautiful and carry the energy that the needlewoman puts into it.
Where to start braiding
First of all, you need to buy tools and accessories for the bracelet. The basis of the bracelet is the beads. They need about 20 pieces, but it all depends on the size of the beads and the required length. To connect these beads you will need a thin cord or special thread. The main thing is that the thread size coincides with the diameter of the bead hole. Also essential tools for making the bracelet are scissors, superglue and scotch tape.
Every needlewoman should be interested in this bracelet, because it is quite easy to weave it. It can be made to your liking, and it will become your real talisman. Before you start, you need to choose the color of the cord and the type of beads. Nowadays, there are many varieties of the required material, thanks to this your bracelet can turn out to be unique.
Before you start making a bracelet, be patient with it, since the first time you can not get exactly what you saw in the picture or in the store, but when you type your hand, you will find it very easy to work with such a decoration.
Master class: Shamballa bracelet with your own hands - double weave with step-by-step photos
If you are already familiar with the technique of doing such bracelets, then you will need no more than 30 minutes for weaving.
1. Take two 25 cm long strands, make knots at the ends and put one bead on each thread, these threads are called internal threads. Now take a working thread 120 cm long and tie it inner at a distance of 2-3 cm
2. For each inner thread you need to put about 12 beads, with the first bead of the left thread and the last right be slightly smaller than all the others, this is necessaryso that their location is even.
In order for the inner threads to be pulled in the subsequent process, they must be firmly fixed to the edge of the table, for example by a large clamp.
3. Strongly tighten the threads and tightly slide the beads to the weave. Next, one of the working threads wind the base spirally clockwise, the second end do the same, but in the opposite direction.
4. When the main part of the bracelet is ready, you need to tie the ends of the inner threads of the working thread again, just like in the beginning, 2-3 cm, put the beads on them and tie the knots.
Doing the fastener
We need special attention for weaving the fastener.
It is necessary to fold the ends of the bracelet parallel to each other and put a thread under them. Further, this thread needs to make knots around the ends, they should be about 5-8, depends on the size of your bracelet. When the knots are made, the remaining thread must be cut off, and the ends should be fixed with superglue so that the thread does not untie and the bracelet does not fall apart. Remember that the glue needs to drip into the knot and then tighten, so the clasp will be fixed. Detailed video tutorials: