womensecr.com

How to polish the car with your own hands? Useful advice to car owners

  • How to polish the car with your own hands? Useful advice to car owners

    click fraud protection

    Polishing a car in a car workshop is an expensive pleasure. It will be more profitable to buy a special tool and materials for polishing once a day and do it yourself. About what materials to choose, in what order to carry out the actions, and will be discussed.

    Preparatory procedures and precautions


    Before proceeding to the most polishing, announce the inventory list that you may need.

    List of necessary materials
    • Shampoo for car washing.
    • Rigid napkin or sponge.
    • White Spirit.
    • Polishing machine.
    • Polishing pastes.

    Preparatory stage
    1. Polishing is best done in the garage or on the street in windless, non-sunny weather to avoid dust and direct sunlight on the body. Polishing can not be used in the sun and at high temperatures.
    2. Inspect the body for bitumen, tar or dirt. Thoroughly wash the car. All that is not washed with water, clean for the second time with the help of White Spirit. Wait for the coating to dry completely.
    3. instagram viewer
    4. Polishing in the cold season( if the process takes place on the street) should also be avoided.
    5. Parts that do not need polishing should be sealed with adhesive tape or paint paper. When polish falls on them, spots are formed.
    6. Provide good illumination of the space in which the polished object will be located.
    7. Polishing is produced far from others by the machine, if you do not want to then wipe off the stains from the paint on nearby types of transport.
    8. If the surface of the car has recently been painted over the whole area or pointwise, then do not polish it. Polishing will prevent the drying out of the paint as soon as possible, the paintwork will remain soft and soon grow old. Wait 2 months.


    Body polishing process


    Polishing can be performed manually or mechanically using a polishing machine. Let's consider both ways.

    Polishing by hand.
    1. Stir well with a polishing cloth before use.
    2. Apply a polishing paste to a hard cloth. Wait 10 seconds for the compound to dry and absorb. Tramp the body in a circular motion. Do not overdo it with the thickness of the layer of polishing substance.
    3. Polishing is best done with small islands, without grabbing huge areas. BecauseThe polish quickly dries up and can be unevenly distributed.
    4. Polish until the surface becomes shiny. Each site requires at least 15 repetitive circular movements.
    5. After treating two, three surfaces, flush the sponge with water, if using polishing cloths, then change them more often.

    Mechanical polishing

    Hand polishing is labor-intensive enough and requires diligence and speed of action. A lighter option is to polish the body with a polishing machine. This kind of polishing is used for deep scratches.
    1. We put on the polishing machine a circle for rough polishing.
    2. Start polishing with coarse abrasive.
    3. Apply 20 grams of paste directly to the surface. Smear the paste over the entire area.
    4. Turn on the machine at a low speed and proceed to polishing. Movements should be cross-shaped( first horizontal, then vertical).The circle of the machine must be parallel to the area to be treated.
    5. Repeat the procedure two times, then increase the speed and do the same until the gloss is achieved.
    6. Wipe off the remains of the paste with a special cloth or microfiber cloth.
    7. Repeat the entire procedure at another polishing station.
    8. After treating the whole body with a paste with a coarse abrasive, proceed to the same treatment with a paste with a fine abrasive.
    9. Do not forget to wash the polishing nozzle with warm water.
    10. In hard-to-reach areas it is recommended to polish manually.
    11. The final touch is polishing the body with a paste without abrasive.
    12. In addition to all, you can apply two times a special protective polish. It prevents corrosion and ensures durability of shine. Protective polishing, as a rule, is carried out twice a year, more often in winter and in spring.
    13. Water the machine with water, if the water is collected in large puddles and drains from the body, then the polishing process was successful. Full drying will come in a day, but you can drive by car after three hours.

    Expert's opinion:



    Here are some tricky and affordable polishing methods presented in the article. Make them come true and your car will shine and radiate you and the eyes of others.