Knitted coats with knitting needles with patterns and description for women from thick yarn
Knitted coats with knitting needles with patterns and description for women
Which girl does not dream about a knitted coat? Yes, perhaps there is no such. But, unfortunately, to buy a knitted coat for a woman, a big difficulty. That color is not the same, the model is not as desirable. So why not try to make yourself a gift.
What do I need?
Well, for a start - a desire, as well as it is necessary to be patient. If you just picked up the knitting needles for the first time, practice: hitch loops, tie several rows with the simplest pattern, look for information on the Internet. And when you have an unbearable desire to create your own small masterpiece, start slowly and carefully.
Required Inventory of
Below we will describe in detail how to make a knitted coat for spokes for women of the 2014 season. The model is very fashionable and not ordinary: the length is below the knee, the figure is a classic cage, and the elegant fur collar is draped over the coat, which, if desired, can be removed.
Here's what you need for this model: the data is for the size 42
1) The spokes - the size number 5
2) The yarn is 100% wool, the size is 80 m / 50 g, 1500g
3) The artificial fur cut-dl.0.55 m, width.140 cm
4) Lining fabric - for 0. 55 m, width.140 cm
5) Gasket woven
6) Hook and loop
Description of knitting step by step
First we sew the elastic band.
- Eraser 1: alternately 2 right, 2 levs
- Eraser 2: alternately 1 right, 1 leve-e
Next we knit the edge of the nodal edge:
As in the case of face knitting, in each row, remove the 1sta loop, and the last one to bind the front.
Convex pattern
Knit by the
scheme( in the lower left corner)
On the right in the diagram the figures are the front rows, with the wrong weaves in the rows of the purl. Before the right arrow proceed from the loops in width, execute the pattern between the arrows, after the left arrow, end with loops. In height, the repetition is from the 1st to the 26th row.
Knitting ring knitting
17 loops / 28 rows = 10 x 10 cm, we sew with a relief pattern.
How to knit a back of a coat
We collect 98 loops, to tie a convex figure. After I-edge we proceed from the arrow "a", we conclude, commensurate with the beginning of the series. After 260 rows, this 93 cm from the first row is closed on both sides for hose cuts of 4 loops. For the oblique lines of the shoulder in the next, 2nd row, we subtract: edges, 1 left, 1 1 right, 1 left, 2 loops we sew together facial crossed, we knit the row with a convex pattern. Except for the last 6 loops, I - further 2 loops tie in one face, 1st purl, 1st obverse, 1st purl, edge. Such reduction is knitted 10 times in each 2nd right row. Then perform the reduction 1 time in the 4 th row and 1 time in the 2 nd row, repeat 9 times. The rest of the 28 stitches are closed in the 2nd row for the neck( straight edge).
The left shelf
And so, we put 46 loops and we sew with a relief pattern. Next, for the extreme loop start from the arrow "a".After 260 rows from the original row, we sew from the right side of the cut for the shoulder and neck lines, exactly as on the back. Along with the I-beginning of the shoulder line, complete the left loop for the cutout 1 loop, then 3 times in each 6th row and 10 times in each 8th row on 1 loop. We knit the right shelf by analogy with the left.
Sleeve sleeves
For sleeve we type 48 stitches with rubber band 1 - 11 rows, then with a relief pattern, after the last loop start from the arrow b( c) and finish commensurate with the beginning of the row. For bevels we add in the 5th row from the rubber band on both sides and 16 more times in each 6th row on 1 loop and 82 loops. We add the added loops to the relief pattern. Through 104 rows from the rubber band 1 we knit the cuts for the neck and the sleeves of both sides, as on the dorsal part. In the next row, close the remaining 12 loops.
Assembling the product
Before sewing knitted coats with knitting needles with diagrams and description, it is necessary to lay out the details on a paper sample and moisten from the sprayer and allow to dry. Next, we make ragged seams, side and sleeve. We fasten the left strap of the fastener: 13 loops, elastic band 2 with nodal lateral edges. After 137 cm, close the hinges according to the scheme. Similarly, we knit the right. Leaving the slits for the buttons. After 48 cm from the first row for the 1st hole, we close the 7th and 8th loops. Again, we type them in the next row. The remaining 3 slits are done every 15 cm. Sew the fastener lines to the front edges of the shelves and the backrest armhole, Fasten the short sides. Sew off the buttons.
We make a collar for a coat with our own hands
We cut out the details according to the pattern according to the
scheme. Open the fur cut with the lining in a single copy. Fixing cloth is fixed with flesilin, we sew along the edges. We turn out the collar and fasten the clasp and loop to it.
Using the same technology, it is possible to make knitted coats with knitting needles from thick yarn, it will look spectacular.
What girl does not dream about a knitted coat? Yes, perhaps there is no such. But, unfortunately, to buy a knitted coat for a woman, a big difficulty. That color is not the same, the model is not as desirable. So why not try to make yourself a gift.
What do you need?
Well, for a start - a desire, as well as it is necessary to be patient. If you just picked up the knitting needles for the first time, practice: hitch loops, tie several rows with the simplest pattern, look for information on the Internet. And when you have an unbearable desire to create your own small masterpiece, start slowly and carefully.
Required Inventory of
Below we will describe in detail how to make a knitted coat for spokes for women of the 2014 season. The model is very fashionable and not ordinary: the length is below the knee, the figure is a classic cage, and the elegant fur collar is draped over the coat, which, if desired, can be removed.
Here's what you need for this model: the data is for the size 42
1) The spokes - the size number 5
2) The yarn is 100% wool, the size is 80 m / 50 g, 1500g
3) The artificial fur cut-dl.0.55 m, width.140 cm
4) Lining fabric - for 0. 55 m, width.140 cm
5) Gasket woven
6) Hook and loop
Description of knitting step by step
First we sew the elastic band.
- Eraser 1: alternately 2 right, 2 levs
- Eraser 2: alternately 1 right, 1 leve-e
Next we knit the edge of the nodal edge:
As in the case of face knitting, in each row, remove the 1sta loop, and the last one to bind the front.
Convex pattern
Knit by the
scheme( in the lower left corner)
On the right in the diagram the figures are the front rows, with the wrong weaves in the rows of the purl. Before the right arrow proceed from the loops in width, execute the pattern between the arrows, after the left arrow, end with loops. In height, the repetition is from the 1st to the 26th row.
Knitting ring knitting
17 loops / 28 rows = 10 x 10 cm, we sew with a relief pattern.
How to knit a back of a coat
We collect 98 loops, to tie a convex figure. After I-edge we proceed from the arrow "a", we conclude with the beginning of the series. After 260 rows, this 93 cm from the first row is closed on both sides for hose cuts of 4 loops. For the oblique lines of the shoulder in the next, 2nd row, we subtract: the edges, 1 left, 1 1 right, 1 left, 2 loops we tie together the facial crossed, we knit the row with a convex pattern. Except for the last 6 loops, I - further 2 loops tie in one face, 1st purl, 1st obverse, 1st purl, edge. Such reduction is knitted 10 times in each 2nd right row. Then perform the reduction 1 time in the 4 th row and 1 time in the 2 nd row, repeat 9 times. The rest of the 28 stitches are closed in the 2nd row for the neck( straight edge).
The left shelf
And so, we put 46 loops and we sew with a relief pattern. Next, for the extreme loop start from the arrow "a".After 260 rows from the original row, we sew from the right side of the cut for the shoulder and neck lines, exactly as on the back. Along with the I-beginning of the shoulder line, complete the left loop for the cutout 1 loop, then 3 times in each 6th row and 10 times in each 8th row on 1 loop. We knit the right shelf by analogy with the left.
Sleeve sleeves
For a sleeve we type 48 loops we sew by an elastic band 1 - 11 numbers, further a relief drawing, after an extreme loop we begin from an arrow b( c) and we finish in proportion to the beginning of a number. For bevels we add in the 5th row from the rubber band on both sides and 16 more times in each 6th row on 1 loop and 82 loops. We add the added loops to the relief pattern. Through 104 rows from the rubber band 1 we knit the cuts for the neck and the sleeves of both sides, as on the dorsal part. In the next row, close the remaining 12 loops.
Assembling the product
Before sewing knitted coats with knitting needles with diagrams and description, it is necessary to lay out the details on a paper sample and moisten from the sprayer and allow to dry. Next, we make ragged seams, side and sleeve. We fasten the left strap of the fastener: 13 loops, elastic band 2 with nodal lateral edges. After 137 cm, close the hinges according to the scheme. Similarly, we knit the right. Leaving the slits for the buttons. After 48 cm from the first row for the 1st hole, we close the 7th and 8th loops. Again, we type them in the next row. The remaining 3 slits are done every 15 cm. Sew the fastener lines to the front edges of the shelves and the backrest armhole, Fasten the short sides. Sew off the buttons.
We make a collar for a coat with our own hands
We cut out the details according to the pattern according to the
scheme. Open the fur cut with the lining in a single copy. Fixing cloth is fixed with flesilin, we sew along the edges. We turn out the collar and fasten the clasp and loop to it.
Using the same technology, it is possible to make knitted coats with knitting needles from thick yarn, it will look spectacular.