Earrings with your own hands: master class for making wire models, beads

Thanks to properly selected accessories, in particular earrings, you can supplement any image and show your individuality. Rudolder can help you figure out how to make earrings yourself master class, presented in this article. To date, all necessary materials, special accessories, decor elements are easy to buy, and the process of making earrings does not take much time.

Master class for making a model of earrings based on wire

Beautiful earrings can be made from ordinary wire. Earrings made of wire are original and look stylish. You will need wire, shvenzy, six connecting rings, beads and metal pendants, as well as nippers and pliers.

In order to understand how to make earrings with your own hands for beginners, below is a master class with a description of all the stages of work. First you need to use a pair of pliers to bite off three pieces of wire on one ring. One of the turns obtained should be cut in half, the larger turn must be bent on one side in the form of a loop. On the edge that remained free, you can type beads, metal pendants, then you need to make a loop on the other edge. Since the earrings will be double, the same scheme of work should be repeated and with a small second ring. Then a ring, a large ring, a smaller ring and a ring should be fastened to the connecting ring in turn. The same scheme must be repeated from the other side. At the final stage, the central ring should be hooked on the schvenz and close the loop, and similarly make a second earring.

Master class for making a model of earrings from beads

In order to make spectacular earrings from beads, you will need beads, accessories and tools for work, namely round-nosed. The process of making earrings consists of several stages. First you need to dial on the wire pin beads and other decor elements according to the idea. Then cut off the free part of the wire pin in such a way that a piece of eight millimeters in length remains and from it you need to make a loop. Then you need to hook on the resulting loop loop of the schwenze, and the product can be considered ready, similarly you need to make a second earring.

Master class on making a model of earrings cuff

Earrings of cuff are a real fashion hit for several seasons in a row. A distinctive feature of these earrings is that they can be worn in different ways, because in order to wear such earrings, there is no need to pierce the ear lobe. In order to make such a model of earrings, only wire and pliers will be needed. All stages of work are shown in the photo.

First of all, you need to prepare a wire about seven and a half centimeters long, then bend a piece two and a half centimeters long, then make another bend. Then the ends of the wire should be bent into rings, then you need to bend the product in half and use the flat-nose pliers to clamp the ends of the wire.

Video lessons on making different models of earrings

In the selection of the video presented below, needlewomen share their experience and tell how to make earrings patterns from wire, beads, and also in one of the video lessons the features of the cuff earring model and their manufacturing options are explained.