Flowers from plastic bottles with their own hands: step by step description with photo

Plastic bottles are an excellent raw material for making various crafts. They are inexpensive, they are not difficult to find, so this is one of the most successful materials. Today we wanted to teach you how to make beautiful flowers. Our master class Flowers from plastic bottles with their own hands will contain a detailed story and for the clarity of the understanding of the process are provided a photo illustration of each step.

Today we will try to make a flower with the beautiful name of Cleavia. Scientific language, this name sounds like Cleavia cinnabar. This flower grows in South Africa. Has inflorescences of bright saturated color, shaped like bells. On the stem there can be up to thirty flowers, which blossom one by one and so long enough to please the eye with their flowering.

Simplicity and beauty of the flowers of the Cleavia can not but delight. Nothing superfluous, everything is perfect. It seems that this plant is a messenger of distant countries, where there is always summer and a bright orange mood. Before you photo of this flower in nature.

But you can perform other handmade items from plastic bottles: flowers, butterflies, animal figurines and even furniture.

Forming the middle

In order to make a pestle, take a thin wire of 20-25 cm and put on it a bead of elongated shape. Now bend the wire in half and put on both ends simultaneously 22 more green beads. For the stamen you will need the same wire and the same length. Beads are strung on the same principle as on a pestle, only in the amount of 19 pieces. The color of the beads in this case is blue. In total, for a flower, it is necessary to make pestles in the quantity of 7 pieces and 42 stamens.

To make a flower, we need a pistil and 6 stamens. Next, we take a wire made of aluminum, 20 cm in length, and fix a pestle to it, while coating the wire with glue. Stamens are located around the pistil and we are wrapping the thread with a strong layer.

Flower. We take 7 pieces of plastic bottles, we cut off the upper part of them. Now each of the bottles is cut into equal strips, rounded, like petals of a flower. Such strips should be 6.

Now we process petals, holding candles above the flame. When the plastic begins to melt, give it a round shape. Thus, first walk through the fire between the petals, then along the edge of each, holding the other petals.

Now we will paint every detail on both sides in red. Paint is better to take an alkyd and conduct the procedure, going out into the street. Put a glove or cellophane bag on your hand and spray the paint on the part, evenly covering it from all sides. The paint must be applied in two layers. When the red layer is well dried, cover the center of the petal circle with a yellow paint.

Now it comes to the cork from the bottle, pierce it with an awl and widen the hole with scissors. Then pour the glue into the cork. Also, we glue the point of connection of the pistil with the stamens and draw them through the plug. Straightening, we give a beautiful view. A circle with petals is inserted into the cork and we wait for the glue to dry. While the glue dries, it is best to keep the flower in a vertical position in a vase or jar.

Now take the green insulating tape and the same color paint. We paint the cork, into which the sepals are inserted, and when the paint dries, we wrap the whole leg of the flower with an insulating tape.

Leaves

Take five or six plastic bottles of green color and cut out the details in the form of leaves. Number of leaves: the smallest 4 pieces, medium 4 pieces and large 8-10 pieces.

By the same principle as we worked with petals, we process our leaves over the candle. Let's go through the fire on the contour of the sheet, then from the bottom on the front side, to straighten the leaf. At the bottom we make a small puncture with the awl and poke in the wire. We fix it with glue.

Now with the same insulating tape wrap the wire with a leaf.

Step-by-step instruction for assembling the entire flower

Next, we need a long, thick wire about one meter in length. We fasten to it the resulting flower with a dense layer of thread. Before this, we glue the top part with glue PVA.

Here is the glue dried. Now we add four flowers in such a way that one is in the center, and three on the edges of it. Their stems bend at an angle, as shown in the photo. We wrap the structure with a dense layer of threads, each layer of which is fixed with glue and green insulating tape.

After drying, wrap the insulating tape with a stem of another centimeter by 30 and place the next three leaves in the same way as described in the previous paragraph. In the same way, we grease with glue and wrap the thread. We wait when the glue dries.

Using the same principle, we fix two small leaves, then three large, two medium ones and again small ones.

Now it is necessary to wrap the tape with the tape until the very end. The flower is ready! That's how he looks at home. The production of flowers from plastic bottles is over.

And here it is shown in its natural environment. Just like real! Our instruction was so detailed that it can actually be called a video master class.

These miracles can be created from waste material. Making flowers from plastic bottles will bring you a lot of positive emotions and pleasant impressions. And following our instructions, you now not only know yourself how to make flowers from plastic bottles for the garden, but also to teach others.

Video tutorials for novice masters