womensecr.com

Weaving bracelets from laces: schemes and video lessons

  • Weaving bracelets from laces: schemes and video lessons

    click fraud protection

    Weaving bracelets from laces: diagrams and video lessons

    Weaving bracelets from laces are very light, and weave such an ornament will be easy. What is good about this type of needlework is that it costs little, and it takes not much time. In addition, the source material can be very diverse. The color scheme is also huge in its variety.

    Where to start braiding the bracelet

    First of all, you need to determine the color of the product and the material from which you plan to weave the bracelet.

    Weaving knots:

    Simple weaving, which creates light and thin bracelets:

    In addition to simple weaving bracelets from braids, we sew beads, the product looks even more elegant. And the difficulties in the performance of any. Here are some ideas:

    1. Take the leather cord of the required length. Next, take the beads and tie them to the string with a finer thread of the desired color.

    2. Need a regular cord and beads. We weave the usual pigtail and weave beads into it. It's simple.

    instagram viewer

    3. And here's another example of weaving bracelet from laces and beads, already known "Shambhala."

    a) Cut the 50 cm cord( the most optimal option is a waxed cord, because it is strong enough).On the cord we put on the number of beads you need, as they will be placed in the finished bracelet.

    b) Now you need to pull the base with the beads to the full length and fasten to make it more convenient to continue working.

    c) The base is fixed, and now you can start knitting nodules. To do this, you need a waxed cord with a length of 1 m. We tie an ordinary knot, but so that the interlacing of the ropes is under the base from the wrong side.

    d) Now you need to make another nodule, right, but close to the main( already done).As it shown on the picture.

    e) We make one more such nodule, but already the left one. E) Now move the first bead and under it you need to make a combination of nodes right-left .G) Move the next bead, but the combination of nodes under it is reversed, i.e. left-right .Just continue to do with all the other beads, changing the combination of nodes after each.

    h) When the last bead remains, then we weave the combination right-left-right under it.

    i) Securing cords. It is necessary to turn the bracelet with the wrong side and the cord that was left to stretch into the loop on the right side( Figure 2).Before you tighten the cord, you need to drip a drop of glue in the place where the threads meet, after tightening, cut the cord as close to the knot as possible. Here we also drip glue, and we press the right cord. Then cut off.

    So, the bracelet is ready. It remains to make a castle for him. At one end of the bracelet cord untie the knot. Now you need to pass both ends of the base towards each other through any bead that will be in the center of the castle.

    Next, you need to take another 50 cm cord and use it to tie a knot based on the lock. The same knot as we wove at the very beginning.

    Now weave as many knots as necessary for the lock. Nodules need to alternate( right with left).Bead, which was in the middle of the castle, should be woven.(But you can not add anything to the castle at all).The ends of the threads of the lock to fasten, as in the bracelet. That's all! The bracelet is ready.

    There is also a video, which shows in detail how to weave "Shambhala."

    Bracelets for men

    Not only do we need jewelry, men also do not mind wearing them. It goes without saying that men's bracelets should be executed in a more restrained range, and the material for manufacturing must be special. In this case, perfectly fit shoelaces made of leather. A bracelet made of such material will not only give a unique image, but will also emphasize masculinity.

    Weaving bracelets from leather laces is hardly different from the options where any other materials are used. This can be seen from the examples.

    The first video in English, but the translation is absolutely not needed, it's very simple:

    Here is another wonderful version:

    Another video in English, but not difficult to comprehend:

    There are many options for weaving from leather laces. Such bracelets are suitable not only for men, but for women. So include fantasy and forward, to new masterpieces!

    Weaving bracelets from laces are easy, and we can make this decoration simple. What is good about this type of needlework is that it costs little, and it takes not much time. In addition, the source material can be very diverse. The color scheme is also huge in its variety.

    Where to start braiding the bracelet

    First and foremost, you need to determine the color of the product and the material from which it is planned to weave the bracelet.

    Weave knitting:

    Simple weaving, which creates light and thin bracelets:

    In addition to simple weaving bracelets from braids, we sew beads, the product looks even more elegant. And the difficulties in the performance of any. Here are some ideas:

    1. Take the leather cord of the required length. Next, take the beads and tie them to the string with a finer thread of the desired color.

    2. You need a regular cord and beads. We weave the usual pigtail and weave beads into it. It's simple.

    3. And here is another example of weaving bracelet from laces and beads, already known "Shambhala."

    a) Cut the 50 cm cord( the most optimal option is a waxed cord, because it is quite strong).On the cord we put on the number of beads you need, as they will be placed in the finished bracelet.

    b) Now you need to pull the base with the beads to the full length and fasten to make it more convenient to continue the work.

    c) The base is fixed, and now you can start knitting nodules. To do this, you need a waxed cord with a length of 1 m. We tie an ordinary knot, but so that the interlacing of the ropes is under the base from the wrong side.

    d) Now you need to make another nodule, right, but close to the main( already done).As it shown on the picture.

    e) We make one more such nodule, but already the left one. E) Now move the first bead and under it you need to make the combination of nodes right-left .G) Move the next bead, but the combination of nodes under it is reversed, i.e. left-right .Just continue to do with all the other beads, changing the combination of nodes after each.

    h) When the last bead remains, then under it we wade the combination right-left-right. I) Fastening cords. It is necessary to turn the bracelet with the wrong side and the cord that was left to stretch into the loop on the right side( Figure 2).Before you tighten the cord, you need to drip a drop of glue in the place where the threads meet, after tightening, cut the cord as close to the knot as possible. Here we also drip glue, and we press the right cord. Then cut off.

    So, the bracelet is ready. It remains to make a castle for him. At one end of the bracelet cord untie the knot. Now you need to pass both ends of the base towards each other through any bead that will be in the center of the castle.

    Next, you need to take another 50 cm cord and use it to tie a knot based on the lock. The same knot as we wove at the very beginning.

    Now weave as many knots as necessary for the lock. Nodules need to alternate( right with left).Bead, which was in the middle of the castle, should be woven.(But you can not add anything to the castle at all).The ends of the threads of the lock to fasten, as in the bracelet. That's all! The bracelet is ready.

    There is also a video, which shows in detail how to weave "Shambhala."

    Bracelets for men

    Not only do we need jewelry, men also do not mind wearing them. It goes without saying that men's bracelets should be executed in a more restrained range, and the material for manufacturing must be special. In this case, perfectly fit shoelaces made of leather. A bracelet made of such material will not only give a unique image, but will also emphasize masculinity.

    Weaving bracelets from leather laces is almost identical to those where any other materials are used. This can be seen from the examples.

    The first video in English, but the translation is absolutely not needed, it's very simple:

    Here is another wonderful option:

    Another video in English, but easy to comprehend:

    There are a lot of options for weaving from leather laces. Such bracelets are suitable not only for men, but for women. So include fantasy and forward, to new masterpieces!