Coat with a solid-sleeved sleeve, a pattern for beginner needlewomen
Coat with a one-piece sleeve: a pattern from the Burda magazine
Coats, dresses, blouses with a one-piece sleeve are popular among fashionistas, thanks to the fact that this type of sleeve does not fetter movements and is comfortable to wear. In addition, it is not difficult to sew such a sleeve to needlewomen, since it has an easy cut and does not require adjustment for a particular figure, and often a solid sleeve can hide the existing shortcomings of the figure.
The peculiarity of the cut of the whole-hose sleeve is that the sleeve is cut out as a single piece together with the shelf and back, and, as a rule, there is no complete or partial line of the armhole. Also, the shoulder line is not clearly designed, which makes it possible to make the shoulders more flat, thus making the outfit feminine.
A coat with a one-piece sleeve, a cut shape for which will be presented in this article, can rightly become one of the most stylish things in the wardrobe.
Simple pattern of a coat model with an all-embroidered sleeve
Beginning needlewomen can use a simple pattern from the magazine "Burda", in order to sew a model of a kimono coat. This model will look stylish at the expense of a three-dimensional silhouette, a wide one-piece sleeve. In addition, the coat-kimono model is perfectly combined with both business suits and dresses.
How to sew a model of a coat with a one-piece sleeve
The coat model with a one-piece sleeve is characterized by a laconic cut. Its peculiarity lies in the fact that the front part of the sleeve is cut together with the front part of the product, respectively, the rear half of the product is cut out together with the elbow part of the sleeve. Sleeves include only two lines: the top and bottom. The top line is connective and continues the seam on the shoulders, and the bottom line should be wedged into the side line.
Before assembling all the cut parts into a single product, you need to steam them one at a time. It is important to steam off the armholes of the sewn hose, both from the front and from the back, then add the edge and put an inconspicuous line.
Next, you need to combine the side cuts on the coat and the lower sections of the sleeves. It is necessary to fold the front and back parts of the article face-to-face with each other to combine the slices, then it is better to manually sew the side cuts with the elbow part of the sleeve at a height of up to a quarter of the elbow, then stitch and press.
In order to combine a crotch with a coat, it is necessary first of all to treat the edges of the crotch, and then stitch it into the product. After that, it is necessary to iron the seams on the side and from below, and the model of a coat with a one-piece sleeve can be considered ready.
Teaching master classes on video
Coats, dresses, blouses with a one-piece sleeve, are quite popular among women of fashion, thanks to the fact that this type of sleeve does not fetter movements and is comfortable to wear. In addition, it is not difficult to sew such a sleeve to needlewomen, since it has an easy cut and does not require adjustment for a particular figure, and often a solid sleeve can hide the existing shortcomings of the figure.
The peculiarity of the cut of the whole-hose sleeve is that the sleeve is cut out as a single piece together with the shelf and the back, and, as a rule, there is no complete or partial line of the armhole. Also, the shoulder line is not clearly designed, which makes it possible to make the shoulders more flat, thus making the outfit feminine.
Coat with a one-piece sleeve, a pattern of burdock for the manufacture of which will be presented in this article, can rightly become one of the most stylish things in the wardrobe.
Simple patterning of a coat model with an all-embroidered sleeve
Beginners can use a simple pattern from Burda magazine to sew a model of a kimono coat. This model will look stylish at the expense of a three-dimensional silhouette, a wide one-piece sleeve. In addition, the coat-kimono model is perfectly combined with both business suits and dresses.
How to sew a model of a coat with a one-piece sleeve
The coat model with a one-piece sleeve is characterized by a laconic cut. Its peculiarity lies in the fact that the front part of the sleeve is cut together with the front part of the product, respectively, the rear half of the product is cut out together with the elbow part of the sleeve. Sleeves include only two lines: the top and bottom. The top line is connective and continues the seam on the shoulders, and the bottom line should be wedged into the side line.
Before assembling all the cut parts into a single product, you need to steam them one at a time. It is important to steam off the armholes of the sewn hose, both from the front and from the back, then add the edge and put an inconspicuous line.
Next, you need to combine the side cuts on the coat and the lower sections of the sleeves. It is necessary to fold the front and back parts of the article face-to-face with each other to combine the slices, then it is better to manually sew the side cuts with the elbow part of the sleeve at a height of up to a quarter of the elbow, then stitch and press.
In order to combine a crotch with a coat, it is necessary first of all to treat the edges of the gusset, and then stitch it into the product. After that, it is necessary to iron the seams on the side and from below, and the model of a coat with a whole-sleeve sleeve can be considered ready.