How to sew a coat without a pattern with a direct silhouette

In case you find a model of a coat that you liked and that suits you perfectly, but, alas, you can not find a developed pattern for sewing, you are wondering how to sew a coat without a pattern? Modern designers offer several models of coats that can be sewn at all without patterns, for example, a coat-cape, a coat-poncho or a coat with a simple straight silhouette. As a rule, the process of sewing such models does not take much time, and they can be sewed by experienced craftsmen, as well as by beginner needlewomen.

How to sew a model of a straight silhouette coat without a pattern

The simplest form of a coat without a self-made pattern that you can sew is a coat with a straight silhouette. In order to sew such a coat, you need to remove the basic measurements. First of all, it is necessary to determine the length of the product, and then measure the neck hem, the length of the shoulder, the length and width of the sleeve and half-hip. In order to correctly measure the length of the sleeve, you must attach a centimeter tape not to the end of the shoulder, but centimeters by ten below. When buying a tissue, you need to add an additional fifteen centimeters to the required amount of tissue. In addition to the basic fabric, you will also need to purchase decor elements and sewing accessories. In addition, if the coat is winter, you can use lining cloth and a heater. So, we sew a coat without a pattern.

To cut the coat, you need to lay the fabric on the surface face down and outline the middle lobe to denote the middle of the back. To the intended line, it is necessary to bend the lateral edges so that they cross the line and then it is necessary to press the fold lines. On the fold lines, from the upper sections, it is necessary to outline the width of the sleeves in the form of dots, according to the standards, and then make straight cuts to these points. The length of the semi-grip of the neck should be divided in half and set aside on both sides of the median line. The same length should be put on the front halves of the open corners, and, thus, the cut lines will be obtained. Then you can unscrew the product, combine the lines of the neck and manually sweep the shoulder seams. In the case of sewing a winter coat, a similar principle of working with a lining cloth and a heater. To make sleeves, you need to cut two rectangles out of the fabric. The length of the larger side should correspond to the length of the sleeve, the length of the smaller side is the width of the sleeve.

The details must be folded in half with the wrong side up, sweep the seams and iron the allowances, then stitch the sleeves into the main part of the product. If a winter coat is sewn, at this stage three coats must be obtained, ie a separate pattern of the coat from the main fabric, from the lining fabric and the insulation. In order to assemble all the cut parts into a single product, it is necessary to combine the insulation with the main part with the help of pins, from above put a coat of lining fabric, then you should combine the seams and stitch them. Then you need to sew the decor elements, for example, process the loops and sew interesting buttons or sew on patch pockets. You can also make the original embroidery, after which the coat model can be considered ready.

Master classes on sewing a coat without a pattern

In order to better understand all the nuances of work, to understand the principles of cutting and sewing without patterns, needlewomen will not be unnecessary to get acquainted with the video, which shows the process of sewing coats without developed blanks.