How to weave a shamballa bracelet for beginners: diagram, photo and video lesson
How to weave a shamballa bracelet for beginners: master class with step-by-step instructions
Decorations perfectly complement the image of a woman, and what can look better than a spacious summer sarafan and a cute bracelet! In combination with the summer light and spacious clothes wonderful looking shamballa bracelets. Such bracelets you can buy in a jewelry store or make yourself, the only difference is a big difference in price. We suggest that you still consider the photo of the braiding lesson of such bracelets.
How to weave bracelet of shamballa for beginners
This skill will be easy for skilled needlewomen, the main thing is to understand the sequence of weaving. After you make a few bracelets yourself, it will be very easy for you to weave them. If you weave such a bracelet for the first time, then carefully look at the scheme of carrying out the shamballa bracelet.
What you need for its manufacture:
1. Approximately 3 meters of cord is brown.
2. 9 beads of green color, with a diameter of 9-10 mm.
3. 2 beads with crystals 8-9 mm in diameter.
5. PVA glue( you can Moment).
6. Lighter.
Getting started
There are several options for the cord holder, we suggest you tie it to any hook, for example, to the casket. It is necessary for you for convenience, that the cord was stretched and the beads did not slip off it.
First cut two cords, one 70-80 cm long, and the second one twice as much. To the hook of the box tie a central cord( 70-80 cm), on it will be strung your beads.
Back off 7 cm from the edge of the center cord, take a longer cut and thread it under the bottom of the short one at the specified distance.
How do I make loops?
The long cord that you passed under the central one, fold in half and tie one knot, then take both the cords and thread them in a semicircle in the opposite direction. IMPORTANT: the left end should be at the bottom of the center cord, and the top on the top. The main thing is not to get confused, but photos will help you.
Now the right cord is threaded into the ring of the left part, and the left one inside the right semicircle, the resulting loop is tightened. The next step is the same as the previous one with the exact opposite. The right cord should be on top, and the left one from the bottom, the loops are swapped. Such nodules are called macrame.
For our bracelet, you need to make five double knots.
When the loops are ready , we have three threads left, we put a bead on the center bead and make a double knot, we do the same to the fourth bead inclusive. In the center of the bracelet we put on a bead with rhinestones, then green, and then again with stones, all this we weave with a knot and string further the remaining beads, as in the beginning.
All subsequent work will be easier, because everything repeats. You need to make the same loops as in the beginning of the bracelet. Lateral cords well tie, seal and cut.
Make the fastener
Cut about 30 cm of string, fold the bracelet ringlet and place under the ends of the bracelet a cut. To complete the buckle, you need to make 10 knots, as you did before. Fasten the fastener to the ends, then cut off the excess cords. Strings that are left, tie, and their ends are burned, so as not to crumble. The bracelet is ready!
If you do not understand something, you can watch the video lessons. Also you can see how to weave double shamballa.
Decorations perfectly complement the image of a woman, and that can look better than a spacious summer sarafan and a cute bracelet! In combination with the summer light and spacious clothes wonderful looking shamballa bracelets. Such bracelets you can buy in a jewelry store or make yourself, the only difference is a big difference in price. We suggest that you still consider the photo of the braiding lesson of such bracelets.
How to weave a shamballa bracelet for beginners
This skill will be easy for skilled needlewomen, the main thing is to understand the sequence of weaving. After you make a few bracelets yourself, it will be very easy for you to weave them. If you weave such a bracelet for the first time, then carefully look at the scheme of carrying out the shamballa bracelet.
What you need for its manufacture:
1. Approx. 3 meters of string of brown.
2. 9 beads of green color, with a diameter of 9-10 mm.
3. 2 beads with crystals 8-9 mm in diameter.
5. PVA glue( you can Moment).
6. Lighter.
Getting started
There are several options for the cord holder, we suggest you tie it to any hook, for example, to the casket. It is necessary for you for convenience, that the cord was stretched and the beads did not slip off it.
First cut two cords, one 70-80 cm long, and the second one twice as much. To the hook of the box tie a central cord( 70-80 cm), on it will be strung your beads.
Back off 7 cm from the edge of the center cord, take a longer cut and thread it under the bottom of the short one at the specified distance.
How to make loops?
The long cord that you passed under the central one, fold in half and tie one knot, then take both the cords and thread them in a semicircle in the opposite direction. IMPORTANT: the left end should be at the bottom of the center cord, and the top on the top. The main thing is not to get confused, but photos will help you.
Now the right cord is threaded into the ring of the left side, and the left one inside the right semicircle, the resulting loop tighten. The next step is the same as the previous one with the exact opposite. The right cord should be on top, and the left one from the bottom, the loops are swapped. Such nodules are called macrame.
For our bracelet you need to make five double knots.
When the hinges are ready for , , we have three threads left, we put a bead on the center bead and make a double knot, the same is done up to the fourth bead inclusive. In the center of the bracelet we put on a bead with rhinestones, then green, and then again with stones, all this we weave with a knot and we string further the remaining beads, as in the beginning.
All subsequent work will be easier, as everything repeats. You need to make the same loops as in the beginning of the bracelet. Lateral cords well tie, seal and cut.
Make the fastener
Cut about 30 cm of string, fold the bracelet ringlet and place under the ends of the bracelet a cut. To complete the buckle, you need to make 10 knots, as you did before. Fasten the fastener to the ends, then cut off the excess cords. Strings that are left, tie, and their ends are burned, so as not to crumble. The bracelet is ready!
If you do not understand something, you can watch the video lessons. Also you can see how to weave double shamballa.