womensecr.com

Origami dragon: a modular scheme and a video lesson for beginners

  • Origami dragon: a modular scheme and a video lesson for beginners

    Origami dragon for beginners: a scheme and a detailed master class with video

    It's no secret that origami art came to us from the East, where dragons are especially revered. No celebration can do without this sacred symbol. The history of this technique began with the use of figures in strictly religious rituals. This explains the existence of different models of dragons. Today I would like to share a simple way of making origami dragons, the scheme to which will be supplemented by a video lesson.

    Of course, you can lay down the dragon in any technique that exists in this ancient art, but the most realistic models are obtained if you use modular origami.

    Preparing for operation

    Before we get to work, we need to prepare triangular modules, from which in the future we will assemble the dragon. The modules from the rectangle are assembled according to the scheme:

    . In total, we need to prepare 767 corners for the work. As for the colors of the dragon, here you can only be guided by your imagination. I used 99 modules of yellow color, 421 - red, 48 - green, 104 - orange, 95 - black.

    So, when everything is ready, go to the collection of the model. So that you do not have any difficulties, how to make an origami dragon, carefully follow the diagram:

    Assembling a figure

    I will try to paint every step as detailed as possible. Your task is to follow the instructions and do the job very carefully.

    The assembly of the dragon begins with the tail. To 1 module of the first row, add 2 modules in the second row. In the third row, we reattach 1 module:

    We repeat the order of the number of modules 2 more times.

    Beginning on the 7th row, extend the tail of the dragon. In the next eight series, we start adding modules according to the scheme: 3 modules, 2 modules, 3 modules. At the red modules along the edges of the tail it is necessary to bend the free corners aside:

    The tail in total should consist of 28 rows. Starting from the 23rd row, the tail again expands, that is, in each even row you need to attach 6 corners, and in odd number - by 5. Also carefully follow the diagram so that the pattern does not go astray:

    Now proceed to assembling the torso of the dragon. We will collect it by links, so as not to get confused with the drawing. One link of the trunk consists of 16 rows, while the free corners of the red modules also need to be bent to the side, as well as on the tail:

    In total there will be 6 links of the trunk. Those.from 29th to 124th series we collect the body. All links are then connected together:

    With the 125th row, we begin to collect the head from 5 modules. In each following row, increase the number of corners. Continue adding 1 module to 131 rows, in which there should be 11 corners. After this, we begin to narrow the head, reducing the number of triangles. As a result, in the 141st row we must have 1 corner.

    We will shape the head of the dragon with the help of a mustache. To do this, in 136, 137,138, 141 rows, insert 1 module on both sides and bend the free corner:

    Now we begin to collect the dragon's paws. Only one paw, we need 8 corners. To the 2 nd corners of the first row we add 3 more modules in the second row, then 2 and 1 more. This is the construction:

    We collect 3 more paws according to the same scheme:

    So, all the details of the dragon are ready. Go to the assembly:

    Thanks to the way of connecting the modules, the design can be given any bend:

    As a result, we got this wriggling dragon:

    This is the lesson on assembling the dragon origami for beginners completed.

    Just also for beginners I recommend viewing visual instructions for assembling an easier origami dragon, video master class you will see a little

    below.

    Other variants on video:

    It's no secret that origami art came to us from the East, where dragons are especially revered. No celebration can do without this sacred symbol. The history of this technique began with the use of figures in strictly religious rituals. This explains the existence of different models of dragons. Today I would like to share a simple way of making origami dragons, the scheme to which will be supplemented by a video lesson.

    Of course, the dragon can be folded in any technique that exists in this ancient art, but the most realistic models are obtained if you use modular origami.

    Getting Started

    Before we get to work, we need to prepare triangular modules, from which in the future we will collect the dragon. The modules from the rectangle are assembled according to the scheme:

    . In total, we need to prepare 767 corners for the work. As for the colors of the dragon, here you can only be guided by your imagination. I used 99 modules of yellow color, 421 - red, 48 - green, 104 - orange, 95 - black.

    So, when everything you need is ready, go on to collect the model. So that you do not have any difficulties, how to make an origami dragon, carefully follow the diagram:

    Assembling a figure

    I will try to paint as much detail in each step. Your task is to follow the instructions and do the job very carefully.

    The assembly of the dragon begins with the tail. To 1 module of the first row, add 2 modules in the second row. In the third row, we reattach 1 module:

    We repeat the order of the number of modules 2 more times.

    Starting with the 7th row, extend the tail of the dragon. In the next eight series, we start adding modules according to the scheme: 3 modules, 2 modules, 3 modules. At the red modules along the edges of the tail it is necessary to bend the free corners aside:

    The tail in total should consist of 28 rows. Starting from the 23rd row, the tail again widens, that is, in each even row it is necessary to attach 6 corners, and in odd number - to 5. Correctly follow the diagram so that the pattern does not get lost:

    Now proceed to assembling the torso of the dragon. We will collect it by links, so as not to get confused with the drawing. One link of the trunk consists of 16 rows, while the free corners of the red modules also need to be bent to the side, as on the tail:

    In total there will be 6 links of the trunk. Those.from 29th to 124th series we collect the body. All links are then connected together:

    With the 125th row, we begin to collect the head from 5 modules. In each following row, increase the number of corners. Continue adding 1 module to 131 rows, in which there should be 11 corners. After this, we begin to narrow the head, reducing the number of triangles. As a result, in the 141st row we must have 1 corner.

    We will shape the head of the dragon with the help of a mustache. To do this, in 136, 137,138, 141 rows, insert 1 module on both sides and bend the free corner:

    Now we begin to collect the dragon's paws. Only one paw, we need 8 corners. To the 2 nd corners of the first row we add 3 more modules in the second row, then 2 and 1 more. This is the construction:

    We collect 3 more paws according to the same scheme:

    So, all the details of the dragon are ready. Proceed to the assembly:

    Thanks to the way of connecting the modules, the design can be given any bend:

    As a result, we have got such a wriggling dragon:

    This is the lesson on assembling the dragon origami for beginners completed.

    Just for beginners I recommend to view the visual instruction on assembling an easier origami dragon, video master class you will see a little

    below.

    More options on video: