womensecr.com

Baubles from the beads: how to weave according to schemes, video for beginners

  • Baubles from the beads: how to weave according to schemes, video for beginners

    Beaded baits: how to weave beautiful fennies in different techniques

    For a long time, one of the most popular youth ornaments - baerex beads, how to weave for beginners, we'll tell you today. If you want to create unique ornaments yourself, then you have come to the right place.

    Weaving materials

    First of all, let's look at the materials that will be needed for weaving with beads.

    First of all, of course, beads. There are many of its shapes, sizes and colors, a lot of materials from which it is made.

    As a basis for braiding use a fishing line, a wire or an elastic thread. All these materials can be found in almost any color.

    Liner:

    Wire:

    Elastic thread:

    Fittings. Basically, these are different types of fasteners, square beads - fastener threads, etc.

    Clasp for 9 threads:

    Clasp for 3 threads:

    Needles for beads. Of course, you can also use ordinary sewing, but we advise you to pay attention to special needles for beadwork: they are thinner, and it will be much more convenient to penetrate them into a small diameter hole.

    The machine is needed if you decide to master the technique of beaded weaving. You can buy already prepared or made from improvised materials, for example, from a cardboard box.

    On the opposite sides of the box, make cuts against each other, making sure that there is an equal distance between them.

    We pull the threads and get to work.

    How to use the schemes?

    Usually, opening a lesson on studying the method of weaving with beads or a master class on creating any decoration, we see a scheme of weaving. Beginners, do not be scared: there is nothing complicated in it, it was created specifically to facilitate the process. The diagram shows beads and threads that pass through beads, showing the direction of weaving. Beads can be painted in different colors, the threads are usually painted when the weaving occurs in two strands.

    Fenichka with the name

    With the use of a machine for weaving with beads, you can how to weave braces with names from beads, and with names of different countries, favorite music groups, with drawings and much, much more. However, this can be done in the technique of weaving "cross".

    In any case, whatever technique you choose, first draw on a regular sheet the scheme of the future baubles, where each cell will correspond to one bead. To do this, you can use the following ready-made schemes for weaving printed and capital letters.

    In the technique of "cross", you can weave using one or two threads. The first method is convenient, if you know exactly how many crosses will be in the series of your product. To determine the number of beads that need to be typed at the beginning, we calculate by the formula N * 2 + 2, where N is the number in the chain of crosses.

    Weave "cross" in one thread

    We collect a simple chain of 20 beads. We take in the left hand so that the end of the set is below.

    The needle is led to the fourth bead from the end, we tighten the thread. We type one more bead. We move in the opposite direction of our beads are low, we insert a needle into the second bead from the last typed bundle. More details on the photo.

    You can use beads of different colors to weave the chain.

    To weave a fresco with a name, you will need to learn the technique of multi-row weaving by a cross.

    The horizontal rows must be an odd number.

    Cross-tailed chain of the required length. Next we will add rows, which requires a thread with two needles at the ends.

    Type the pair of beads on the thread and move to the middle, in the right side bead of the first link of the first chain, enter the left end of the thread. Add to the same end still bead, and in it we enter the right end of the thread.

    Now we already put on the right end of the bead, and the left one is led through the second bead of the second element of the chain-base. At the same end, add 1 bead, we draw the right thread into it.

    So we weave the necessary number of rows, creating a canvas.

    To get an even better look at this method, you can also watch a video with a lesson learning this technique.

    For a long time, one of the most popular youth adornments - the baubles of beads, how to weave for beginners, we'll tell you today. If you want to create unique ornaments yourself, then you have come to the right place.

    Materials for weaving

    First of all, let's look at the materials that will be needed for weaving with beads.

    First of all, of course, beads. There are many of its shapes, sizes and colors, a lot of materials from which it is made.

    As a basis for braiding use a fishing line, a wire or an elastic thread. All these materials can be found in almost any color.

    Liner:

    Wire:

    Elastic thread:

    Fittings. Basically, these are different types of fasteners, square beads - fastener threads, etc.

    Clasp for 9 threads:

    Clasp for 3 strands:

    Needles for beads. Of course, you can also use ordinary sewing, but we advise you to pay attention to special needles for beadwork: they are thinner, and it will be much more convenient to penetrate them into a small diameter hole.

    The machine is needed if you decide to master the technique of beaded weaving. You can buy already prepared or made from improvised materials, for example, from a cardboard box.

    On the opposite sides of the box make cuts against each other, making sure that there is an equal distance between them.

    We pull the threads and get to work.

    How to use the schemes?

    Usually, opening a lesson on studying the method of weaving with beads or a master class on creating any decoration, we see a scheme of weaving. Beginners, do not be scared: there is nothing complicated in it, it was created specifically to facilitate the process. The diagram shows beads and threads that pass through beads, showing the direction of weaving. Beads can be painted in different colors, the threads are usually painted when the weaving occurs in two strands.

    Fenichka with the name

    With the use of a machine for beading, you can how to weave braces with names from beads, and with names of different countries, favorite music groups, with drawings and much, much more. However, this can be done in the technique of weaving "cross".

    In any case, whatever technique you choose, first draw on the usual sheet the scheme of the future baubles, where each cell will correspond to one bead. To do this, you can use the following ready-made schemes for weaving printed and capital letters.

    In the technique of "cross", you can weave using one or two threads. The first method is convenient, if you know exactly how many crosses will be in the series of your product. To determine the number of beads that need to be typed at the beginning, we calculate by the formula N * 2 + 2, where N is the number in the chain of crosses.

    Weave "cross" in one thread

    We collect a simple chain of 20 beads. We take in the left hand so that the end of the set is below.

    The needle is taken to the fourth bead from the end, we tighten the thread. We type one more bead. We move in the opposite direction of our beads are low, we insert a needle into the second bead from the last typed bundle. More details on the photo.

    You can use beads of different colors to weave the chain.

    To weave a fresco with a name, you will need to master the technique of multi-row weaving by a cross.

    The horizontal rows must be an odd number.

    Cross-tailored chain of the required length. Next we will add rows, which requires a thread with two needles at the ends.

    Select a pair of beads on the thread and move to the middle, in the right side bead of the first link of the first chain, enter the left end of the thread. Add to the same end still bead, and in it we enter the right end of the thread.

    Now we put on the right end of the bead, and the left one is led through the second bead of the second element of the chain-base. At the same end, add 1 bead, we draw the right thread into it.

    So we weave the necessary number of rows, creating a canvas.

    To get an even better look at this method, you can also view the video with a lesson learning such technique.