Pattern of overalls for a newborn with a description of tailoring step by step

The appearance of a new little man in the house adds to the worries of parents. One of them is to stock up on things for the baby. Today we will sew and knit overalls. To do this, we will need a pattern of overalls for the newborn.

Knitted overall

Will brighten up expectation of the kid and will distract from disturbing thoughts about forthcoming sorts knitting of a dowry for the newborn. A ready-made pattern of a knitted overall for a newborn will help to spend time with advantage.

The process of needlework is presented in the video below.

Tailoring of overalls on the sewing machine

For the winter outfit we take the following pattern:

.

It shows the allowances for seams for the front. The allowances for cutting the underlay are 1 cm. From the main fabric, you can still sew mittens and booties for a complete set.

It's better to take the sizes for the first months of life 62-68.It all depends on the child's birth time so that things last for 1 or 2 seasons.
Take:

• main fabric( for example, plaschevka);
• lining made of fleece or sheepskin;
• heater( sintepon);
• 2 zippers without connector;
• cord;
• cord on the elastic band;
• fixers and cable lugs.

Cut details out of the lining and lining. Translate all patterns to sintepon. Each part is obtained with a heater. And when sewing the insulation will be 2 layers.

Manual sweeps from plashevki and sintepon, so that the main fabric does not wrinkle when stitching. The protruding parts of the sintepon should be removed with scissors on all the details.

Make a crease on the center bottom of the gear and sweep it with the yoke. Then attach the stripes of fleece to the central front detail in the places where the zipper will be. The size of the strips should be slightly more than lightning to save heat when wearing.

In the same way sew the fleece to the inner edges of the side parts of the gear. Now connect the sidewalls of the transfer with the central part below the level of lightning. In the figure, the place of stitching is marked in red.

Sweep the cuts for locks.

We pass to the back. Connect the details of the last and stitch to the front, with the exception of the side edges, which are sewn together with the sleeves.

Sew the sleeves to the front and back, to stitch the side seams that were mentioned above.

Now we'll work on the hood.

Cut out the fringing from the fur, stitch the seam on the main part. Then join the stitches with the edging.

Stitch on the machine by stepping back from the newly welded seam of 1.5 cm. Thereafter, a string will be inserted here. Next, make a hood from the lining. Attach the two parts one to the other face inward.

Sweep the lining and the main fabric, then put the stitch on the machine.

Release the hood.

Cut out the backing for lightning. Place the parts face-in and stitch, leaving the junction with the neck not sewn.

Unscrew and stitch the edge with stitches.

Fold the backing with the hood face to face, lining to the lining. Sweep them with each other and stitch it.

It should look like this.

Connect the hood with overalls to the front.

Insert the zipper.

Staple the parts of the lining.

Make a wedge for gum from a plaschke.

Sew the cushers on the sleeves and trousers.

The next step is to sew shoes and mittens.

In the same way, sew shoes and mittens to the lining.

Connect the front sides of the hood and overalls lining.

Connect the coats of the laces and the lining to the sides.

Now insert the lining into the jumpsuit and sew the stitches of the boot and mittens with the hand stitches, and also make the connection in several places.

Sweep and stitch the zipper first to the main fabric, then to the lining.

The seam of the substrate is slightly cheeked and filled with a sintepon. Pull the string into the hood of the hood. Attach the button to the substrate.

It remains to stretch the elastic bands in the kulisks of hands and feet. It was a warm overall.

To make out the usual pattern of a transformer for a newborn, it is necessary to provide additional allowances for sewing zippers on the inner surface of the legs.

Sewing a thick overall for a child is a laborious process and requires the presence of certain knowledge and skills in the basics of sewing. Therefore, before tackling a difficult thing, at first it is better to master the sewing of thin models of cotton.